All CountriesChange

300 Universal Beam Clamp



  • Conforms with Federal Specification WW-H-171 (Type 23), Manufacturers Standardization Society ANSI®/MSS-SP-58 (Type 19 and 23)

Product Specifications

Part Number 3000037EG
Material Steel
Finish Electrogalvanized
Rod Size (RS) 3/8", 3/8"
Flange Thickness (FT) 13/16" Max, 20.6 mm Max
A 1 1/8", 28.5 mm
Screw Diameter (Sc) 3/8", 3/8"
Torque (TQ) 5 ft lb, 7 N-m
Static Load 1 (F1) 500 lb, 2,200 N
Static Load 2 (F2) 250 lb, 1,100 N
Standard Packaging Quantity 100 pc
UPC 78285633976
UNSPSC 31162905
ETIM EC000464
Certifications cULus, FM

Setscrew must be tightened and torqued onto the sloped side of the I-beam.

Recognizing that torque wrenches are generally not used or available on many job sites, the setscrew should be tightened so it contacts the I-beam and then an additional 1/4 to 1/2 turn added.

Application Photos

Due to a policy of continued product development, specifications are subject to change without notice.
CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH, and LENTON are registered trademarks of ERICO International Corporation.

ANSI is a registered trademark of American National Standards Institute.
FM is a registered certification mark of FM Approvals LLC, LTD.
UL, UR, cUL, cUR, cULus and cURus are registered certification marks of UL LLC.