All CountriesChange

Universal Transient Barrier Single Pair: UTB60SPG

Ordering Information

Region	Part / Article #
North America	UTB60SPG
Latin America	UTB60SPG
Europe/Middle East/Africa	702877
Asia/Australia	UTB60SPG

Application Information

The UTB series is designed to provide transient protection for equipment from surges induced onto balanced pair signal lines. They are well suited to the protection of industrial equipment such as PLCs and SCADA systems. Other uses include the protection of fire and security alarms, industrial monitoring and control equipment.
The UTB-SP (single pair) employs a hybrid multistage clamping circuit, to help ensure the best possible protection to sensitive electronic equipment while maintaining a minimum of line interference and insertion loss.
The UTB-SPG (single pair - isolated ground) provides isolation between the shield/common return and protective ground at the point of connection.

Features

General purpose barrier – protection of low-voltage circuits and transducers
Separate plug and base design – hot swappable feature allows ease of module replacement
Multi stage protection – fine over-voltage protection, helps ensure lowest residual surge voltages reach sensitive equipment
Common-mode and differential-mode protection – protects against both possible surge conditions
Ease of grounding – through DIN mounting rail or via terminal
Surge rating to 20 kA 8/20 µs – ideal for exposed wiring
Allows for protection of 25 analog signals or 50 digital signals per linear foot of DIN rail space

Product Specifications


Approvals	UL® 497B CE
Connection	1 mm² to 2.5 mm² (#18AWG to 14AWG) Grounding via terminal or DIN rail connection
Depth	72.00 mm
Enclosure	DIN 43 880, UL94V-0 thermoplastic, IP 20 (NEMA-1)
Frequency	3 MHz
Height	90.00 mm
Humidity	0 % RH [Min] 90 % RH [Max]
Loop Resistance	1.0 Ω
Max Continuous Operating Voltage Uc - AC	45 V
Max Continuous Operating Voltage Uc - DC	64 V
Max Discharge Current	20 kA 8/20 µs (L+L)-PE
Max Line Current, IL	2.0 A [Max]
Mounting	35 mm top hat DIN rail
Nominal Voltage - AC	21 V [Min] 42 V [Max]
Nominal Voltage - DC	30 V [Min] 60 V [Max]
Product Series	CRITEC® Universal Transient Barrier
Protection Modes	Differential & Common Mode
Replacement Module	UTB60SPGM
Replacement Module (Europe)	702883
Surge Rated to Meet	ANSI®/IEEE® C62.41.2 Cat A, Cat B, Cat C
Technology	GDT MOV Silicon
Temperature	-20°C [Min] 65°C [Max]
Voltage Protection Level (8/20µs)	85 V @ 3 kA L-L
Weight	0.07 kg
Width	12.00 mm

Application Photos

Click each thumbnail below for a larger version.

Warning, Warranty and Limitation of Liability

WARNING
ERICO products shall be installed and used only as indicated in ERICO's product instruction sheets and training materials. Instruction sheets are available at www.erico.com and from your ERICO customer service representative. Improper installation, misuse, misapplication or other failure to completely follow ERICO's instructions and warnings may cause product malfunction, property damage, serious bodily injury and death.

WARRANTY
ERICO products are warranted to be free from defects in material and workmanship at the time of shipment. NO OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED (INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), SHALL EXIST IN CONNECTION WITH THE SALE OR USE OF ANY ERICO PRODUCTS. Claims for errors, shortages, defects or nonconformities ascertainable upon inspection must be made in writing within 5 days after Buyer's receipt of products. All other claims must be made in writing to ERICO within 6 months from the date of shipment or transport. Products claimed to be nonconforming or defective must, upon ERICO's prior written approval in accordance with its standard terms and procedures governing returns, promptly be returned to ERICO for inspection. Claims not made as provided above and within the applicable time period will be barred. ERICO shall in no event be responsible if the products have not been stored or used in accordance with its specifications and recommended procedures. ERICO will, at its option, either repair or replace nonconforming or defective products for which it is responsible or return the purchase price to the Buyer. THE FOREGOING STATES BUYER'S EXCLUSIVE REMEDY FOR ANY BREACH OF ERICO WARRANTY AND FOR ANY CLAIM, WHETHER SOUNDING IN CONTRACT, TORT OR NEGLIGENCE, FOR LOSS OR INJURY CAUSED BY THE SALE OR USE OF ANY PRODUCT.

LIMITATION OF LIABILITY
ERICO excludes all liability except such liability that is directly attributable to the willful or gross negligence of ERICO's employees. Should ERICO be held liable its liability shall in no event exceed the total purchase price under the contract. ERICO SHALL IN NO EVENT BE RESPONSIBLE FOR ANY LOSS OF BUSINESS OR PROFITS, DOWNTIME OR DELAY, LABOR, REPAIR OR MATERIAL COSTS OR ANY SIMILAR OR DISSIMILAR CONSEQUENTIAL LOSS OR DAMAGE INCURRED BY BUYER.

Due to a policy of continued product development, specifications are subject to change without notice.
CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH, and LENTON are registered trademarks of ERICO International Corporation.