CADDY® Deck Hanger and TDHP2 Punch

CADDY® TDH hangers from ERICO® are a quick and easy way to attach fasteners to metal decking. Just use the redesigned TDHP2 Decking Hanger Punch to put holes in the decking, line up the hanger and slide the retaining bar through the holes. It’s that simple. With more features for easier operation, this improved one-piece hole punch can be adjusted from 0.47” to 3.15” (12 mm to 80 mm) according to individual requirements. To ensure trouble-free operation and removal, the punch features press-fit ejector springs and a smooth-running, patented transmission mechanism. The TDHP2 is ideal for corrugated metal sheeting with a wall thickness up to 14 gauge (2 mm).

The hangers are ideal for suspending lights and hanging cable tray, dropped ceilings and strut trapezes from overhead metal decking. They are constructed from spring steel, which is durable, lightweight and has high gripping power. TDH Decking Hangers are fully rated to hang loads from roof decking, unlike screws, which are not load rated, evaluated or approved to support vertical loads from roof decking.

Features

Deck Hanger

  • Minimum roof decking sheet thickness of 24 gauge (0.63 mm)
  • Maximum roof decking bottom web width of 2” (50 mm)
  • 1/4” or 3/8” square section nut or 3/8” (10 mm) clearance hole

Punch

  • Variable depth gauge of 0.47” to 3.15” (12 mm to 80 mm)
  • Press-fit ejector springs help ensure trouble-free removal 
  • Smooth-running, patented transmission mechanism for easy operation
  • For corrugated metal sheeting with a thickness up to 14 gauge (2 mm)

Applications

A quick and easy method for attaching fasteners to metal decking.

More Information

Easy Installation

                           
Step 1: Punch holes in the decking    Step 2: Line up the hanger  



Step 3: Slide the retaining bar through the holes 


     
Step 4: Hang the installation



Part Number Description Std Box Qty
TDH 3/8" plain hole 50
TDHT4 1/4"-20 nut 50
TDHT6
 3/8"-16 nut 50
TDHM6 6 mm nut 50
TDHM8
 8 mm nut
 50
TDHM10
 10 mm nut
 50
TDHP2
 Deck Hanger Punch
 1
TDHP2PR10
 Replacement Punch (requires 2 per punch)
 2
Check with deck manufacturer for recommended load capacity.

WARNING
ERICO products shall be installed and used only as indicated in ERICO's product instruction sheets and training materials. Instruction sheets are available at www.erico.com and from your ERICO customer service representative. Improper installation, misuse, misapplication or other failure to completely follow ERICO's instructions and warnings may cause product malfunction, property damage, serious bodily injury and death.

WARRANTY
ERICO products are warranted to be free from defects in material and workmanship at the time of shipment. NO OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED (INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), SHALL EXIST IN CONNECTION WITH THE SALE OR USE OF ANY ERICO PRODUCTS. Claims for errors, shortages, defects or nonconformities ascertainable upon inspection must be made in writing within 5 days after Buyer's receipt of products. All other claims must be made in writing to ERICO within 6 months from the date of shipment or transport. Products claimed to be nonconforming or defective must, upon ERICO's prior written approval in accordance with its standard terms and procedures governing returns, promptly be returned to ERICO for inspection. Claims not made as provided above and within the applicable time period will be barred. ERICO shall in no event be responsible if the products have not been stored or used in accordance with its specifications and recommended procedures. ERICO will, at its option, either repair or replace nonconforming or defective products for which it is responsible or return the purchase price to the Buyer. THE FOREGOING STATES BUYER'S EXCLUSIVE REMEDY FOR ANY BREACH OF ERICO WARRANTY AND FOR ANY CLAIM, WHETHER SOUNDING IN CONTRACT, TORT OR NEGLIGENCE, FOR LOSS OR INJURY CAUSED BY THE SALE OR USE OF ANY PRODUCT.

LIMITATION OF LIABILITY
ERICO excludes all liability except such liability that is directly attributable to the willful or gross negligence of ERICO's employees. Should ERICO be held liable its liability shall in no event exceed the total purchase price under the contract. ERICO SHALL IN NO EVENT BE RESPONSIBLE FOR ANY LOSS OF BUSINESS OR PROFITS, DOWNTIME OR DELAY, LABOR, REPAIR OR MATERIAL COSTS OR ANY SIMILAR OR DISSIMILAR CONSEQUENTIAL LOSS OR DAMAGE INCURRED BY BUYER.

Due to a policy of continued product development, specifications are subject to change without notice.

Copyright © 2013 ERICO International Corporation.
CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH, and LENTON are registered trademarks of ERICO International Corporation.