CADDY® CABLECAT - Wide Base Cable Support

ERICO offers the CADDY CABLECAT- Wide Base Cable Support as a non-continuous pathway for high-speed communication cables based on the properties of the cables.

Features

  • Cost-effective alternative to expensive cable tray
  • Multiple tree configurations possible
  • Galvanized finish on J-hooks provide smoother cable pull and greater corrosion resistance

Applications

  • Provides proper support of high-speed copper or fiber optic cable and innerduct
  • Variety of sizes and designs available to attach to virtually any structure or sub-structure

More Information

Details by Region: North and Latin America

North and Latin America

  • Complies with UL, cUL, NEC and EIA/TIA requirements for structured cabling systems
  • Provides proper support of Category 5e, Category 6, fiber optic and innerduct  

CADDY CABLECAT J-hooks CADDY CABLECAT J-Hooks

Catalog No. Fig No. Description Std Box Qty
Pre-Riveted Factory Assemblies For 3/4" Diameter Loop
CAT12BC 8 Screw-on 1/8" thru 1/2" flange 40
CAT12BC200 9 Screw-on 1/8" thru 5/8" flange 40
CAT1224SM 10 Hammer-on 1/8" thru 1/4" flange 40
CAT1258SM 10 Hammer-on 5/16" thru 1/2" flange 40
CAT12912SM 10 Hammer-on 1/2" thru 3/4" flange 40
CAT1224 11 Hammer-on 1/8" thru 1/4" flange – bottom mount rotates 360° 40
CAT1258 11 Hammer-on 5/8" thru 1/2" flange – bottom mount rotates 360° 40
CAT12912 11 Hammer-on 1/2" thru 3/4" flange – bottom mount rotates 360° 20
CAT12VF14 12 1/16" thru 1/4" vertical flange 40
CAT12AF14 13 1/6" thru 1/4" Z purlin 40
CAT124Z34 14 #12 thru 1/4" wire, plain or threaded rod and 1/8" thru 3/8" flange 60
CAT126Z34 14 3/8" plain or threaded rod and 3/8" thru 9/16" flange 60
CAT12AB 15 Angle bracket 80
CAT12BCB 16 Screw-on 1/8" thru 1/2" flange–rotates 360° 40
CAT12BC200B 17 Screw-on 1/8" thru 5/8" flange–rotates 360° 40
CAT12TS 18 Acoustical tee bar 60
CAT12CD1B 19 Under floor support to pedestal 20

Catalog No. Fig No. Description Std Box Qty
Pre-Riveted Factory Assemblies For 1-5/16" Diameter Loop
CAT21528 7 Cable to acoustical tee bar 20
CAT21BC 8 Screw-on 1/8" thru 1/2" flange 40
CAT21BC200 9 Screw-on 1/8" thru 5/8" flange 40
CAT2124SM 10 Hammer-on 1/8" thru 1/4" flange 40
CAT2158SM 10 Hammer-on 5/16" thru 1/2" flange 40
CAT21912SM 10 Hammer-on 1/2" thru 3/4" flange 40
CAT2124 11 Hammer-on 1/8" thru 1/4" flange – rotates 360° 40
CAT2158 11 Hammer-on 5/16" thru 1/2" flange – rotates 360° 40
CAT21912 11 Hammer-on 1/2" thru 3/4" flange – rotates 360° 20
CAT21VF14 12 1/16" thru 1/4" vertical flange 40
CAT21AF14 13 1/6" thru 1/4" Z purlin 40
CAT214Z34 14 #12 thru 1/4" wire, plain or threaded rod and 1/8" thru 3/8" flange 60
CAT216Z34 14 3/8" plain or threaded rod and 3/8" thru 9/16" flange 60
CAT21AB 15 Angle bracket 40
CAT21BCB 16 Screw-on 1/8" thru 1/2" flange–rotates 360° 40
CAT21BC200B 17 Screw-on 1/8" thru 5/8" flange–rotates 360° 40
CAT21CD1B 19 Under floor support to pedestal 20

Catalog No. Fig No. Description Std Box Qty
*Pre-Riveted Factory Assemblies For 2" Diameter Loop
CAT32528 7 Cable to acoustical tee bar 20
CAT32BC 8 Screw-on 1/8" thru 1/2" flange 40
CAT32BC200 9 Screw-on 1/8" thru 5/8" flange 20
CAT3224SM 10 Hammer-on 1/8" thru 1/4" flange 40
CAT3258SM 10 Hammer-on 5/16" thru 1/2" flange 40
CAT32912SM 10 Hammer-on 1/2" thru 3/4" flange 40
CAT3224 11 Hammer-on 1/8" thru 1/4" flange – rotates 360° 40
CAT3258 11 Hammer-on 5/16" thru 1/2" flange – rotates 360° 20
CAT32912 11 Hammer-on 1/2" thru 3/4" flange – rotates 360° 20
CAT32VF14 12 1/16" thru 1/4" vertical flange 40
CA32AF14 13 1/6" thru 1/4" Z purlin 40
CAT324Z34 14 #12 thru 1/4" wire, plain or threaded rod and 1/8" thru 3/8" flange 40
CAT326Z34 14 3/8" plain or threaded rod and 3/8" thru 9/16" flange 40
CAT32AB 15 Angle bracket 40
CAT32BCB 16 Screw-on 1/8" thru 1/2" flange – rotates 360° 20
CAT32BC200B 17 Screw-on 1/8" thru 5/8" flange – rotates 360° 20
CAT32CD1B 19 Under floor support to pedestal 20

WARNING
ERICO products shall be installed and used only as indicated in ERICO's product instruction sheets and training materials. Instruction sheets are available at www.erico.com and from your ERICO customer service representative. Improper installation, misuse, misapplication or other failure to completely follow ERICO's instructions and warnings may cause product malfunction, property damage, serious bodily injury and death.

WARRANTY
ERICO products are warranted to be free from defects in material and workmanship at the time of shipment. NO OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED (INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), SHALL EXIST IN CONNECTION WITH THE SALE OR USE OF ANY ERICO PRODUCTS. Claims for errors, shortages, defects or nonconformities ascertainable upon inspection must be made in writing within 5 days after Buyer's receipt of products. All other claims must be made in writing to ERICO within 6 months from the date of shipment or transport. Products claimed to be nonconforming or defective must, upon ERICO's prior written approval in accordance with its standard terms and procedures governing returns, promptly be returned to ERICO for inspection. Claims not made as provided above and within the applicable time period will be barred. ERICO shall in no event be responsible if the products have not been stored or used in accordance with its specifications and recommended procedures. ERICO will, at its option, either repair or replace nonconforming or defective products for which it is responsible or return the purchase price to the Buyer. THE FOREGOING STATES BUYER'S EXCLUSIVE REMEDY FOR ANY BREACH OF ERICO WARRANTY AND FOR ANY CLAIM, WHETHER SOUNDING IN CONTRACT, TORT OR NEGLIGENCE, FOR LOSS OR INJURY CAUSED BY THE SALE OR USE OF ANY PRODUCT.

LIMITATION OF LIABILITY
ERICO excludes all liability except such liability that is directly attributable to the willful or gross negligence of ERICO's employees. Should ERICO be held liable its liability shall in no event exceed the total purchase price under the contract. ERICO SHALL IN NO EVENT BE RESPONSIBLE FOR ANY LOSS OF BUSINESS OR PROFITS, DOWNTIME OR DELAY, LABOR, REPAIR OR MATERIAL COSTS OR ANY SIMILAR OR DISSIMILAR CONSEQUENTIAL LOSS OR DAMAGE INCURRED BY BUYER.

Due to a policy of continued product development, specifications are subject to change without notice.