LENTON® LOCK S-Series Mechanical Rebar Splicing System The LENTON® LOCK S-Series, part of the LENTON LOCK Mechanical Rebar Splicing System from ERICO, provides many of the same great benefits as the B-Series, except in a smaller package. All LENTON LOCK couplers feature patented gripping technology that provides overall structural integrity in tension, compression and stress-reversal applications.
With a performance that exceeds Type 1 requirements on ASTM® A706 and A615 Grade 60 rebar, this innovative mechanical rebar splice is designed for use in column splicing, bridge applications, piling, splicing to protruding dowels cast in concrete, closure pours, beams, chimney construction and other demanding splicing applications.
The couplers allow for easy field installation since no bar-end preparation, sawing or swaging is necessary, and they can be installed with just a standard wrench or an impact wrench, depending on coupler size. The bolt heads will shear off when proper installation tightness has been reached, which allows for complete visual inspection.
The S-Series is ideal for use in repair, bent bar, retrofit, precast closure pour and new construction applications. The couplers meet or exceed major international building codes and Department of Transportation requirements, including ACI® 318 Type 1, UBC® Type 1 and IBC® Type 1.
LENTON LOCK works as a one-step transition on ASTM (in-lb) and metric rebar. For Canadian rebar sizes, contact ERICO for transition compatibility.
Features - Meets or exceeds major international building codes and Department of Transportation requirements, including ACI® 318 Type 1, UBC® Type 1 and IBC® Type 1
- For use with rebar meeting ASTM A706 or ASTM A615 grades 40 and 60
- Uses standard rebar; requires no bar-end preparation, such as sawing or swaging, and is ideal for in-situ splices
- Is smaller than other bolted splices currently available
- Works in repair, bent bar, retrofit, precast closure pour and new construction applications
- Installs quickly and easily using simple hand tools; does not require special skilled labor
- Allows for simple visual inspection
- Works as one-step transition on ASTM (in-lb) and metric rebar
- Epoxy coating available
Applications LENTON® LOCK S-Series is ideal for column splicing, bridge applications, piling, splicing to protruding dowels cast in concrete, closure pours, beams, chimney construction and other demanding splicing applications.
More Information Simple 1-2-3 Installation:
 |  |  | | 1.Insert the LENTON LOCK coupler over reinforcing bar 1. | 2.Tighten bolts from the center
to the end to secure onto the
first reinforcing bar. (impact wrench shown*)
| 3.Repeat steps 1 & 2 with the second reinforcing bar on the other side of the coupler. |
Note: Dimensions are typical. Bolt length may vary after the bolt heads are sheared off.
*When using an air impact wrench it is recommended to use a wrench with double the torque rating identified.
Impact sockets should always be used when using an impact wrench.
Additionally, check the air pressure and air flow requirements prior to installation.
Refer
to complete installation instructions provided with the product or
available at www.erico.com prior to commencing installation. |
ACI is a registered trademark of the American Concrete Institute
UBC is a registered trademark of the International Conference of Building Officials Corporation
IBC is a registered trademark of the International Code Council
ASTM is a registered trademark of the ASTM International
WARNING
ERICO products shall be installed and used only as indicated in ERICO's product instruction sheets and
training materials. Instruction sheets are available at www.erico.com and from your ERICO customer service
representative. Improper installation, misuse, misapplication or other failure to completely follow ERICO's
instructions and warnings may cause product malfunction, property damage, serious bodily injury and death.
WARRANTY
ERICO products are warranted to be free from defects in material and workmanship at the time of shipment.
NO OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED (INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE), SHALL EXIST IN CONNECTION WITH THE SALE OR USE OF ANY ERICO PRODUCTS. Claims for errors,
shortages, defects or nonconformities ascertainable upon inspection must be made in writing within 5 days
after Buyer's receipt of products. All other claims must be made in writing to ERICO within 6 months from the
date of shipment or transport. Products claimed to be nonconforming or defective must, upon ERICO's prior
written approval in accordance with its standard terms and procedures governing returns, promptly be returned
to ERICO for inspection. Claims not made as provided above and within the applicable time period will be
barred. ERICO shall in no event be responsible if the products have not been stored or used in accordance
with its specifications and recommended procedures. ERICO will, at its option, either repair or replace
nonconforming or defective products for which it is responsible or return the purchase price to the Buyer.
THE FOREGOING STATES BUYER'S EXCLUSIVE REMEDY FOR ANY BREACH OF ERICO WARRANTY AND FOR ANY CLAIM, WHETHER
SOUNDING IN CONTRACT, TORT OR NEGLIGENCE, FOR LOSS OR INJURY CAUSED BY THE SALE OR USE OF ANY PRODUCT.
LIMITATION OF LIABILITY
ERICO excludes all liability except such liability that is directly attributable to the willful or gross
negligence of ERICO's employees. Should ERICO be held liable its liability shall in no event exceed the
total purchase price under the contract. ERICO SHALL IN NO EVENT BE RESPONSIBLE FOR ANY LOSS OF BUSINESS OR
PROFITS, DOWNTIME OR DELAY, LABOR, REPAIR OR MATERIAL COSTS OR ANY SIMILAR OR DISSIMILAR CONSEQUENTIAL LOSS
OR DAMAGE INCURRED BY BUYER.
Due to a policy of continued product development, specifications are subject to change without notice.
Copyright © 2010 ERICO International Corporation.
CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH, and LENTON are registered trademarks of ERICO International Corporation.
|
 |
|
