CADDY® EM Pipe Clip Range

ERICO offers the CADDY EM Pipe Clip Range. 

Features

EM Clip

  • Spring steel clip, EPZ corrosion protection (also available in stainless steel)
  • Beam flange thickness - 3-20 mm
  • Simply hammered into position
  • Two M6 thread impression holes
  • Can be used in combination with HSC Snap Clips

EM-SM Clip

  • Same general characteristics as the EM-clip
  • Riveted stud M6 x 11 mm for securing equipment

EM-P Clip

  • Same general characteristics as the EM clip
  • The conduit is simply pushed into position
  • Conduit clip will rotate 360°

EM-M Clip

  • Same general characteristics as the EM clip
  • The conduit clip is locked secure with pliers
  • Conduit clip rotates 360°

Applications

The CADDY EM range of clips is designed for securing services, cables and pipes. 

More Information

EM Clip - for securing threaded rods or installing cables with cable ties onto the beam

Description Part No. A mm Protection Pack Load
EM24 170050 3-8 4 100 45
EM58 170060 8-14 4 100 45
EM912 170070 14-20 4 100 45
EM24-2 179720 3-8 2 100 20
EM58-2 179730 8-14 2 100 20
EM912-2 179740 14-20 2 100 20

EM-SM Clip - for securing electrical services, etc. with M6 bolts or nuts

Description Part No. A mm Protection Pack Load
EM24SM 170530 3 - 8 4 100 33
EM58SM 172060 8 - 14 4 100 33
EM912SM 171850 14 - 20 4 100 33
EM24SM-2 179750 3 - 8 2 100 20
EM58SM-2 179760 8 - 14 2 100 20
EM912SM-2 179740 14 - 20 2 100 20

EM-P Clip - for securing conduits to beam with vertically riveted rotating clip

Description Part No. A mm B mm Protection Pack Load
8EP24 172150 3 - 8 18 - 22 4 100 11
8EP58 172160 8 - 14 18 - 22 4 100 11
8EP912 175100 14 - 20 18 - 22 4 50 11
12EP24 175110 3 - 8 22 - 30 4 100 11
12EP58 175120 8 - 14 22 - 30 4 100 11
12EP912 175130 14 - 20 22 - 30 4 50 11
16EP24 175140 3 - 8 30 - 35 4 100 11
16EP58 175150 8 - 14 30 - 35 4 50 11
16EP912 175160 14 - 20 30 - 35 4 50 11

EM-M Clip - for attaching conduits, pipes and cables with vertical riveted rotating clip

Description Part No. A mm Ø mm Protection Pack Load
6EM24 173550 3 - 8 14 - 18 4 100 33
6EM58 171750 8 - 14 14 - 18 4 100 33>
6EM912 173560 14 - 20 14 - 18 4 50 33
812EM24 160120 3 - 8 18 - 30 4 50 33
812EM58 160130 8 - 14 18 - 30 4 50 33
812EM912 160140 14 - 20 18 - 30 4 50 33
16EM24 171740 3 - 8 30 - 35 4 50 33
16EM58 171490 8 - 14 30 - 35 4 50 33
16EM912 173570 14 - 20 30 - 35 4 50 33
20EM24 171800 3 - 8 35 - 42 4 50 33
20EM58 171950 8 - 14 35 - 42 4 50 33
20EM912 173580 14 - 20 35 - 42 4 50 33
24EM24 171960 3 - 8 42 - 50 4 50 33
24EM58 171970 8 - 14 42 - 50 4 50 33
24EM912 173590 14 - 20 42 - 50 4 50 33
32EM24 173600 3 - 8 50 - 60 4 50 33
32EM58 173610 8 - 14 50 - 60 4 50 33
32EM912 173620 14 - 20 50 - 60 4 50 33
8EM24-2 179780 3 - 8 18 - 22 2 100 20
8EM58-2 179790 8 - 14 18 - 22 2 50 20
8EM912-2 179800 14 - 20 18 - 22 2 50 20
12EM24-2 179810 3 - 8 22 - 30 2 50 20
12EM58-2 179820 8- 14 22 - 30 2 50 20
12EM912-2 179830 14 - 20 22 - 30 2 50 20

WARNING
ERICO products shall be installed and used only as indicated in ERICO's product instruction sheets and training materials. Instruction sheets are available at www.erico.com and from your ERICO customer service representative. Improper installation, misuse, misapplication or other failure to completely follow ERICO's instructions and warnings may cause product malfunction, property damage, serious bodily injury and death.

WARRANTY
ERICO products are warranted to be free from defects in material and workmanship at the time of shipment. NO OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED (INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), SHALL EXIST IN CONNECTION WITH THE SALE OR USE OF ANY ERICO PRODUCTS. Claims for errors, shortages, defects or nonconformities ascertainable upon inspection must be made in writing within 5 days after Buyer's receipt of products. All other claims must be made in writing to ERICO within 6 months from the date of shipment or transport. Products claimed to be nonconforming or defective must, upon ERICO's prior written approval in accordance with its standard terms and procedures governing returns, promptly be returned to ERICO for inspection. Claims not made as provided above and within the applicable time period will be barred. ERICO shall in no event be responsible if the products have not been stored or used in accordance with its specifications and recommended procedures. ERICO will, at its option, either repair or replace nonconforming or defective products for which it is responsible or return the purchase price to the Buyer. THE FOREGOING STATES BUYER'S EXCLUSIVE REMEDY FOR ANY BREACH OF ERICO WARRANTY AND FOR ANY CLAIM, WHETHER SOUNDING IN CONTRACT, TORT OR NEGLIGENCE, FOR LOSS OR INJURY CAUSED BY THE SALE OR USE OF ANY PRODUCT.

LIMITATION OF LIABILITY
ERICO excludes all liability except such liability that is directly attributable to the willful or gross negligence of ERICO's employees. Should ERICO be held liable its liability shall in no event exceed the total purchase price under the contract. ERICO SHALL IN NO EVENT BE RESPONSIBLE FOR ANY LOSS OF BUSINESS OR PROFITS, DOWNTIME OR DELAY, LABOR, REPAIR OR MATERIAL COSTS OR ANY SIMILAR OR DISSIMILAR CONSEQUENTIAL LOSS OR DAMAGE INCURRED BY BUYER.

Due to a policy of continued product development, specifications are subject to change without notice.

Copyright © 2010 ERICO International Corporation.
CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH, and LENTON are registered trademarks of ERICO International Corporation.