From main structure on down, ERICO has "lightweight" - heavyweights to support you right from the top.
CADDY® ROD LOCK Beam Clamp As part of the CADDY® ROD LOCK system, the beam clamp works with slightly damaged threads and minor burrs on the threaded rod and helps to reduce installation time by up to 60%.
CADDY® "C" & "Z" Purlin Clips CADDY AF / VF series for "C" and "Z" purlin can be hammered on or installed from the floor with the VAFT tool and rigid conduit. VF also works on open bar joist.
CADDY® 122, 123 Clip Range The CADDY range of 122, 123 clips are designed for installation of services to angled purlin section. For European customers.
CADDY® 4J Clips The CADDY 4J Clips are designed for installing electrical services. For European customers.
CADDY® AF Clip The CADDY AF Clip is used for the suspension of services from angled purlin section. For European customers.
CADDY® BC200 Series Beam Clamps CADDY BC200 series beam clamps fit flanges up to 5/8" and accept 1/4"-20 threaded components.
CADDY® BC400 Series Big Beam Clamps CADDY BC400 beam clamps fit flanges up to 3/4" and accept 3/8"-16 threaded components. Ideal for Electrical, Mechanical and HVAC Applications.
CADDY® Bulb Tee Clip CADDY Bulb Tee Clips are available for 1/4" carriage bolts, 1/4"-20 nuts, 3/8"-16 stud or nut.
CADDY® C-Clamp The CADDY C-Clamp is designed for suspension or direct attachment of services and cables. For European customers.
CADDY® C-EC Clamp The CADDY C-EC Clamp is used for securing conduits and cables to strut profiles.
CADDY® C-ES Clamp The CADDY C-ES Clamp has been designed for securing conduits, pipes or cables at right angles directly to the beam.
CADDY® C-EU Clamp The CADDY C-EU clamp is used for securing conduits, pipes or cables at right angles directly onto the beam. For European customers.
CADDY® Clamping System 6000HB The CADDY Clamping System 6000HB is designed for the suspension of heavy components from inclined beam flanges. For European customers.
CADDY® Clamping System HB2 The CADDY Clamping System HB2 is designed for the suspension of lighter components from inclined beam flanges. For European customers.
CADDY® Clamping Systems 3000, 2000, 1000 CADDY Clamping Systems 3000, 2000 and 1000 are designed for attaching or suspending lighter elements or loads. For European customers.
CADDY® D1, D2, D3 Purlin Clamps The CADDY D1, D2, D3 Purlin Clamps are designed for the suspension of threaded rod from purlin section. For European customers.
CADDY® EBC Beam Clamp The CADDY EBC range of beam clamps is designed for attaching or suspending services, cables, pipes etc, from steel beams and sections. For European customers.
CADDY® EM Pipe Clip Range The CADDY EM range of clips is designed for securing services, cables, and pipes. For European customers.
CADDY® H Clip Range - Europe/Asia The CADDY H Clip range is designed for suspending or attaching services, cables etc to metal beams.
CADDY® Hammer-On Flange Clip CADDY Hammer-On Flange Clips offers a 1/4"-20 thread for (side or underside) beam attachment of components.
CADDY® Hammer-On Z Purlin Clips CADDY Hammer-On Z Purlin Clips are available pre-riveted to other CADDY fasteners for a variety of applications.
CADDY® Kit INC8 The CADDY Kit INC8 is used for securing services and equipment inside H or C section beams. For European customers.
CADDY® Malleable Beam Clamp - Model 255 The CADDY Malleable Beam Clamp (Model 255) is available for 3/8", 1/2" and 5/8" threaded rod to beam flanges up to 3/4" thick.
CADDY® Retainer Strap Assemblies CADDY Retainer Strap Assemblies require only a hammer to install to beams. Also eliminates cumbersome assemblies and hardware.
CADDY® Reversible Beam Clamps - Models 300 & 310 CADDY Reversible Beam Clamps (Model 300 & 310) permit attachment of threaded rod (up to 5/8"-11) to top or bottom flanges (up to 1-1/4" thick).
CADDY® SC and HK Snap Clips The CADDY SC and HK Snap Clips are designed for installing cables or tubes with a diameter of 6-32 mm. For European customers.
CADDY® Strut-To-Beam System The CADDY 6000 series Strut-to-Beam System permits fast attachment of heavy equipment or service piping (up to 2000 lbs.) without drilling or welding the structural beam.
CADDY® System BTF - Beam Tray Fixing The CADDY System BTF is an ingenious combination of EM Clips and wired cable tray for securing cables along steel beams. For European customers.
CADDY® Universal Beam Hangers (UBH & UBHT) CADDY Universal Beam Hangers fit most existing concrete or steel beams without the need for drilling. For European customers.
CADDY® UPC Universal Purlin Clamp The CADDY Universal Purlin Clamp (UPC) is used for the suspension of threaded rods from purlin section. For European customers.
CADDY® VF/J Clips The CADDY VF/J Clips are used for suspending services from angle section or purlins. For European customers.
All Countries
