ERICO offers a range of grounding products to complement the ground rods line, including signal reference grids, ground enhancing material (GEM), ground bars and more.
Cable Runway Ground Strap A Cable Runway Ground Strap bonds cable tray, wire mesh tray and cable runway components together and to the telecommunications grounding and bonding infrastructure.
Common Bonding Network Jumper A Common Bonding Network (CBN) Jumper is the electrical connection between the cabinet/rack bonding bus bar and the common bonding network.
Copper Utility Pole Bottom Plate The EGP100 copper grounding plate installs on the base of a wooden pole and is used as an economical grounding electrode.
Earth Rod Seal Kits The Earth Rod Seal Kit, part of the ERITECH® line of products from ERICO®, prevents ground water from entering the earth pit and reduces pressure on the cover and inner chamber.
EK16/EK17 Direct Burial Ground Clamp The new EK16 and EK17 Direct-Burial Ground Clamps from ERICO® are a time-saving, cost-effective versatile product that combines four clamps into one.
ERITECH® RC70/RC100 The ERITECH® RC70/RC100 rebar clamp provides two connection points to concrete encased electrodes (rebar) in grounding systems
ERITECH® Arc Weldable Bonds Flash welded (19 strand) concentric cable to steel rod for grounding/bonding connection to structural steel and to rebar.
ERITECH® Earth Rod Inspection Box PIT-03 The PIT-03 offers a high level of security and allows regular maintenance of critical ground terminations through the use of its lockable lid. For European and Asian customers.
ERITECH® EST401 Ground Resistance Tester The ERITECH® EST401 measures the resistance to ground, verifies the quality of grounding connections and bonds, and measures the resistance and continuity of grounding loops around pads and buildings.
ERITECH® Inspection Wells ERITECH inspection wells provide a convenient access point to test the integrity and performance of grounding electrodes and connections. For North and Latin American customers
ERITECH® Mechanical SRG System The ERITECH Mechanical Signal Reference Grid system allows for fast, simple and economical field construction of wire signal reference grids used in computer room grounding.
Fence and Gate Post Clamps Fence and Gate Post Clamps allow the ground conductor to dissipate energy into a low-impedance grounding system to protect the facility, equipment and personnel from lightning or transient voltages
GEM - Ground Enhancement Material ERICO’s Ground Enhancement Material (GEM) is a superior conductive material that improves grounding effectiveness, especially in areas of poor conductivity.
Ground Bars Proper bonding is essential to create an equipotential plane between service grounds and equipment during fault and transient conditions.
Ground Resistance Testers The range of ground testers offered by ERICO are lightweight and portable for ease of use in the field. The digital models perform both ground and soil resistivity tests and measure up to 2000O
Grounding Grids, Mats & Assemblies ERICO® prefabricated wire mesh mats are convenient, efficient and economical for safe grounding in high voltage installations and wherever large area equipotential grounds are required.
Intersystem Bonding Termination Intersystem Bonding Termination is an easy-to-install way to interconnect and terminate grounding conductors from power, telephone, CATV or radio and television antennas.
Mesh Bonding Network Connector MBNC The Mesh Bonding Network Connectors (MBNC) allow for fast, simple and economical field connection of grounding and bonding wires.
Prefabricated Mesh Prefabricated Mesh is a convenient, efficient and economical solution for equipotential bonding grids around and under pools and spas.
Signal Reference Grids (SRG) ERICO Signal Reference Grids (SRG’s) provide a low impedance equipotential plane to protect sensitive electronic equipment from transients.
Solar Bonding Lugs The ERITECH® brand of solar bonding lugs from ERICO are designed to bond the frames and mounting structures of solar photovoltaic systems in accordance with NEC® requirements.
TGB & TMGB Ground Busbars ERICO has a complete offering of Telecommunications Main Grounding Busbar (TMGB) & Telecommunications Grounding Busbar (TGB) for central bonding of telecommunications equipment.
Theft Deterrent Ground Assembly The Theft Deterrent Surge Ground Assembly (TDSGA) is a unique and cost-effective alternative to using conventional bus bars in a grounding system.
Universal Pedestal Clamp with Cable Management Feature The Universal Pedestal Clamp allows for fast, simple and economical field construction of mesh bonding network (MBN) and cable management systems in data centers and computer rooms.
Water Pipe Clamps In addition to the CADWELD® line of exothermic connections, ERICO also offers mechanical connectors for applications that do not warrant a welded connection.
All Countries
