CADDY® Flange Mount Conduit Clip

All CountriesChange

Datasheets, Brochures and Catalog Sections

Cable/Conduit

Engineering Drawings

CADDY Conduit Hangers and Supports Engineering Drawing

Engineering Specifications

CADDY Conduit Hangers and Supports Engineering Specification

Availability

North America

Latin America

CADDY® Flange Mount Conduit Clip - Push-In

CADDY® Flange Mount Conduit Clip - Push-In Print this page

ERICO offers the CADDY Flange Mount Conduit Clip - Push-In.

Features

Available with CADDY Conduit Clip bottom mounted or side mounted
Requires only hammer to install
Will pivot thru 360°

NOTE: When using rigid conduit on P series, use next size larger clip (1/2" Rigid use 12P)

Applications

Available for 1/2" thru 1" EMT, rigid and aluminum conduit.

More Information

Fig. 1 Load 25 lbs.
Fig. 2 Load 15 lbs.
Indicated loads are static and should not be combined.

Fig 1
Catalog No. Fig 2
Catalog No. Description Std Box Qty

8P24 8P24SM 1/2" conduit to 1/8" to 1/4" flanges 100

8P58 8P58SM 1/2" conduit to 5/16" to 1/2" flanges 100

8P912 8P912SM 1/2" conduit to 9/16" to 3/4" flanges 100

12P24 12P24SM 3/4" conduit to 1/8" to 1/4" flanges 100

12P58 12P58SM 3/4" conduit to 5/16" to 1/2" flanges 100

12P912 12P912SM 3/4" conduit to 9/16" to 3/4" flanges 100

16P24 16P24SM 1" conduit to 1/8" to 1/4" flanges 100

16P58 16P58SM 1" conduit to 5/16" to 1/2" flanges 100

16P912 16P912SM 1" conduit to 9/16" to 3/4" flanges 50

Due to a policy of continued product development, specifications are subject to change without notice.

CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH, and LENTON are registered trademarks of ERICO International Corporation.

Warning, Warranty and Limitation of Liability

WARNING
ERICO products shall be installed and used only as indicated in ERICO's product instruction sheets and training materials. Instruction sheets are available at www.erico.com and from your ERICO customer service representative. Improper installation, misuse, misapplication or other failure to completely follow ERICO's instructions and warnings may cause product malfunction, property damage, serious bodily injury and death.

WARRANTY
ERICO products are warranted to be free from defects in material and workmanship at the time of shipment. NO OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED (INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), SHALL EXIST IN CONNECTION WITH THE SALE OR USE OF ANY ERICO PRODUCTS. Claims for errors, shortages, defects or nonconformities ascertainable upon inspection must be made in writing within 5 days after Buyer's receipt of products. All other claims must be made in writing to ERICO within 6 months from the date of shipment or transport. Products claimed to be nonconforming or defective must, upon ERICO's prior written approval in accordance with its standard terms and procedures governing returns, promptly be returned to ERICO for inspection. Claims not made as provided above and within the applicable time period will be barred. ERICO shall in no event be responsible if the products have not been stored or used in accordance with its specifications and recommended procedures. ERICO will, at its option, either repair or replace nonconforming or defective products for which it is responsible or return the purchase price to the Buyer. THE FOREGOING STATES BUYER'S EXCLUSIVE REMEDY FOR ANY BREACH OF ERICO WARRANTY AND FOR ANY CLAIM, WHETHER SOUNDING IN CONTRACT, TORT OR NEGLIGENCE, FOR LOSS OR INJURY CAUSED BY THE SALE OR USE OF ANY PRODUCT.

LIMITATION OF LIABILITY
ERICO excludes all liability except such liability that is directly attributable to the willful or gross negligence of ERICO's employees. Should ERICO be held liable its liability shall in no event exceed the total purchase price under the contract. ERICO SHALL IN NO EVENT BE RESPONSIBLE FOR ANY LOSS OF BUSINESS OR PROFITS, DOWNTIME OR DELAY, LABOR, REPAIR OR MATERIAL COSTS OR ANY SIMILAR OR DISSIMILAR CONSEQUENTIAL LOSS OR DAMAGE INCURRED BY BUYER.