Non-Metallic Sheathed Cable and MC/AC Cable Support CER4
Every installer knows how frustrating it can be when cables are pushed or pulled out of a location during the drywall phase. To resolve this situation, ERICO® has developed an innovative cable support to maintain the 1-1/4” spacing from the face of the stud that is required by the NEC®.
Suitable for both non-metallic sheathed cables and MC/AC cables, the CER4, part of the CADDY® line of fasteners, is the next generation of the popular CJ6 cable support. The CER4 has a variety of unique features, including flared edges to help prevent damage to the cable jacket and a “stop-bend” design, which keeps the cables centered and accounts for overcompensation by preventing them from being pushed too far from the face of the stud.
The CER4 features a patent-pending design and is cULus® Listed. It can support up to four MC/AC cables or four 12-3 non-metallic sheathed cables with ground.
- Effectively support non-metallic sheathed and MC/AC cables
- Secures cables 1-1/4” from the face of the stud
- Flared edges prevent damage to the cable jacket
- Holds up to four MC/AC cables or four 12-3 non-metallic sheathed cables with ground
- Unique “stop-bend” design helps prevent cables from being installed too far from face of stud
- Patent pending design
- cULus® Listed
Innovative cable support maintains the 1-1/4” spacing from the face of the stud that is required by the NEC®.
Non-metallic sheathed cable and MC/AC Cable Support
|single cables up
to 6-3 stranded
|up to 12-3 w.|
|No. of cables
NEC is a registered trademark of, and National Electric Code (NEC) standard is a copyright of the National Fire Protection Association.
cULus is a registered trademark of the Underwriters Laboratories, Inc.
Warning, Warranty and Limitation of Liability
ERICO products shall be installed and used only as indicated in ERICO's product instruction sheets and
training materials. Instruction sheets are available at www.erico.com and from your ERICO customer service
representative. Improper installation, misuse, misapplication or other failure to completely follow ERICO's
instructions and warnings may cause product malfunction, property damage, serious bodily injury and death.
ERICO products are warranted to be free from defects in material and workmanship at the time of shipment.
NO OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED (INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE), SHALL EXIST IN CONNECTION WITH THE SALE OR USE OF ANY ERICO PRODUCTS. Claims for errors,
shortages, defects or nonconformities ascertainable upon inspection must be made in writing within 5 days
after Buyer's receipt of products. All other claims must be made in writing to ERICO within 6 months from the
date of shipment or transport. Products claimed to be nonconforming or defective must, upon ERICO's prior
written approval in accordance with its standard terms and procedures governing returns, promptly be returned
to ERICO for inspection. Claims not made as provided above and within the applicable time period will be
barred. ERICO shall in no event be responsible if the products have not been stored or used in accordance
with its specifications and recommended procedures. ERICO will, at its option, either repair or replace
nonconforming or defective products for which it is responsible or return the purchase price to the Buyer.
THE FOREGOING STATES BUYER'S EXCLUSIVE REMEDY FOR ANY BREACH OF ERICO WARRANTY AND FOR ANY CLAIM, WHETHER
SOUNDING IN CONTRACT, TORT OR NEGLIGENCE, FOR LOSS OR INJURY CAUSED BY THE SALE OR USE OF ANY PRODUCT.
LIMITATION OF LIABILITY
ERICO excludes all liability except such liability that is directly attributable to the willful or gross
negligence of ERICO's employees. Should ERICO be held liable its liability shall in no event exceed the
total purchase price under the contract. ERICO SHALL IN NO EVENT BE RESPONSIBLE FOR ANY LOSS OF BUSINESS OR
PROFITS, DOWNTIME OR DELAY, LABOR, REPAIR OR MATERIAL COSTS OR ANY SIMILAR OR DISSIMILAR CONSEQUENTIAL LOSS
OR DAMAGE INCURRED BY BUYER.
Due to a policy of continued product development, specifications are subject to change without notice.
CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH, and LENTON are registered trademarks of ERICO