All CountriesChange

CADDY® EBC Beam Clamp

The CADDY EBC range of beam clamps is designed for attaching or suspending services, cables, pipes etc, from steel beams and sections.

Features

EBC Beam Clamp

For beam flanges up to 16 mm thickness
Serrated clamp for improved load rating
EPZ corrosion protection
Can also be used in combination with HSC Snap Clips

EBC-MA Beam Clamp

Same general characteristics as EBC
For height adjustment, simply squeeze the spring steel component
The load rating applies to the vertically suspended threaded rod

EBC-MSM Beam Clamp

Same general characteristics as the EBC
Load rating applies to conduit in the vertical axis
The conduit support clip will rotate 360°
The conduit clip is locked secure with pliers

EBC-M Beam Clamp

Same general characteristics as the EBC-MSM but for vertical conduit support
The conduit clip will rotate 360°

EBC-RBMX Beam Clamp

Same general characteristics as the EBC
The cables are simply pushed into position

EBC-P Beam Clamp

Same general characteristics as the EBC
The conduits are simply pushed into position
The conduit clip will rotate 360°

EBC-PSM Beam Clamp

Same characteristics as the EBC-P
Rotating clip riveted onto the side of EBC

Applications

For attaching or suspending services with threaded rods, chains or wires from steel beams and sections.

More Information

EBC Beam Clamp - for threaded rods, chains or wires

Description Part No. A mm M Protection Pack Load

EBC 170380 <16 6 4 100 45

EBC-MA Beam Clamp - for suspending threaded rods from beams

Description Part No. A mm Ø Protection Pack Load

EBCM6MA 172990 <16 M6 4 100 25

EBCM8MA 173000 <16 M8 4 100 25

EBCM10MA 173010 <16 M10 4 100 25

EBC-MSM Beam Clamp - for attaching conduits, pipes and cables horizontally or vertically

Description Part No. A mm Ø mm Protection Pack Load

EBC6MSM 172650 <16 >14-18 4 100 11

EBC812MSM 160180 <16 18-30 4 100 11

EBC16MSM 172660 <16 30-35 4 100 11

EBC20MSM 172670 <16 35-42 4 100 11

EBC24MSM 172680 <16 42-50 4 50 11

EBC32MSM 172690 <16 50-60 4 50 11

EBC-M Beam Clamp - for attaching conduits, pipes and cables horizontally

Description Part No. A mm B mm Protection Pack Load

EBC6M 172580 <16 14-18 4 100 45

EBC812M 160200 <16 18-30 4 100 45

EBC16M 172590 <16 30-35 4 100 45

EBC20M 172600 <16 35-42 4 50 45

EBC24M 172610 <16 42-50 4 50 45

EBC32M 172620 <16 50-60 4 50 45

EBC-RBMX Beam Clamp - for the secure installation of low voltage cables

Description	Part No.	A mm	Ø mm	Protection	Pack
EBCRBMX	172820	<16	10.5-12	4	100

EBC-P Beam Clamp - for attaching conduits and pipes horizontally

Description Part No. A mm Ø mm Protection Pack Load

EBC8P 172700 <16 18-22 4 100 11

EBC12P 172710 <16 22-30 4 100 11

EBC16P 172720 <16 30-35 4 100 11

EBC-PSM Beam Clamp - for attaching conduits and pipes horizontally

Description Part No. A mm Ø mm Protection Pack Load

EBC8PSM 172730 <16 18-22 4 100 7

EBC12PSM 172740 <16 22-30 4 100 7

EBC16PSM 172750 <16 30-35 4 100 7

Availability

Asia/Australia
Europe/Middle East/Africa

Warning, Warranty and Limitation of Liability

WARNING
ERICO products shall be installed and used only as indicated in ERICO's product instruction sheets and training materials. Instruction sheets are available at www.erico.com and from your ERICO customer service representative. Improper installation, misuse, misapplication or other failure to completely follow ERICO's instructions and warnings may cause product malfunction, property damage, serious bodily injury and death.

WARRANTY
ERICO products are warranted to be free from defects in material and workmanship at the time of shipment. NO OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED (INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), SHALL EXIST IN CONNECTION WITH THE SALE OR USE OF ANY ERICO PRODUCTS. Claims for errors, shortages, defects or nonconformities ascertainable upon inspection must be made in writing within 5 days after Buyer's receipt of products. All other claims must be made in writing to ERICO within 6 months from the date of shipment or transport. Products claimed to be nonconforming or defective must, upon ERICO's prior written approval in accordance with its standard terms and procedures governing returns, promptly be returned to ERICO for inspection. Claims not made as provided above and within the applicable time period will be barred. ERICO shall in no event be responsible if the products have not been stored or used in accordance with its specifications and recommended procedures. ERICO will, at its option, either repair or replace nonconforming or defective products for which it is responsible or return the purchase price to the Buyer. THE FOREGOING STATES BUYER'S EXCLUSIVE REMEDY FOR ANY BREACH OF ERICO WARRANTY AND FOR ANY CLAIM, WHETHER SOUNDING IN CONTRACT, TORT OR NEGLIGENCE, FOR LOSS OR INJURY CAUSED BY THE SALE OR USE OF ANY PRODUCT.

LIMITATION OF LIABILITY
ERICO excludes all liability except such liability that is directly attributable to the willful or gross negligence of ERICO's employees. Should ERICO be held liable its liability shall in no event exceed the total purchase price under the contract. ERICO SHALL IN NO EVENT BE RESPONSIBLE FOR ANY LOSS OF BUSINESS OR PROFITS, DOWNTIME OR DELAY, LABOR, REPAIR OR MATERIAL COSTS OR ANY SIMILAR OR DISSIMILAR CONSEQUENTIAL LOSS OR DAMAGE INCURRED BY BUYER.

Due to a policy of continued product development, specifications are subject to change without notice.
CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH, and LENTON are registered trademarks of ERICO International Corporation.

CADDY® EBC Beam Clamp

Features

Applications

More Information

Related Products

Availability