All CountriesChange

CADDY® GTD Clip

CADDY® GTD ClipPrint this page

Erico offers CADDY GTD Clips.

Features

GTD Clip

  • Spring locking action ensures secure retention
  • M-GTD - M6, M8 or M10 thread impression
  • 10-GTD - 10.5 mm clearance hole
  • EPZ corrosion protection
  • Put in place by simple pressure
  • Can be used in combination with HSC Snap Clips

GTD-M Clip

  • Same general characteristics as the GTD Clip
  • Conduit clip rotates 360°
  • Conduit is put in place by simple pressure
  • Can be used in combination with HSC Snap Clip

Applications

The CADDY range of GTD Clips are designed for suspending services, conduits, etc. from metal decking section (composite floor).

More Information

GTD - For suspending services from metal decking section (composite floor) with threaded rods

Description Part No. B mm C mm Ø M/mm Protection Pack Load
M6GTD12-17 160320 12-17 >14 M6 4 100 60
M8GTD12-17 160330 12-17 >14 M8 4 100 90
M10GTD12-17 160340 12-17 >14 M10 4 100 90
M6GTD17-22 160350 17-22 >16 M6 4 100 60
M8GTD17-22 160360 17-22 >16 M8 4 100 90
M10GTD17-22 160370 17-22 >16 M10 4 100 90
10GTD12-17 160380 12-17 >14 10.5 4 100 90
10GTD17-22 160390 17-22 >16 10.5 4 100 90

GTD-M - For securing conduits to metal decking section (composite floor)

Description Part No. B mm C mm Ø M/mm Protection Pack Load
M6GTD12-17 160320 12 - 17 >14 M6 4 100 60
M8GTD12-17 160330 12 - 17 >14 M8 4 100 90
M10GTD12-17 160340 12 - 17 >14 M10 4 100 90
M6GTD17-22 160350 17 - 22 >16 M6 4 100 60
M8GTD17-22 160360 17 - 22 >16 M8 4 100 90
M10GTD17-22 160370 17 - 22 >16 M10 4 100 90
10GTD12-17 160380 12 - 17 >14 10.5 4 100 90
10GTD17-22 160390 17 - 22 >16 10.5 4 100 90

Availability

Europe/Middle East/Africa

Due to a policy of continued product development, specifications are subject to change without notice.
CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH, and LENTON are registered trademarks of ERICO International Corporation.