CADDY® H Clip Range - Europe/Asia

All CountriesChange

Availability

Asia/Australia

Europe/Middle East/Africa

CADDY® H Clip Range - Europe/Asia

CADDY® H Clip Range - Europe/Asia Print this page

The CADDY H Clip range is designed for suspending or attaching services, cables, etc. to metal beams.

Features

H Clip

Spring steel clip with EPZ corrosion protection (also available in stainless steel)
Profile thickness: 2-20 mm max
Simply hammer into position

H-i Clip

With M6 thread impression

H-iX Clip

Riveted stud M6 x 11 mm

H-ST Clip

2H4ST3 - ideal for purlin applications
Steel strip is easily formed into place by hand

H-RBMX Clip

Allows cable separation
Cables are pushed into position

H-CA/H-CB Clips

Single (CA) or double (CB) application

H-CT Clip

For all types of cable ties up to a max size of 9 x 2 mm

H-CTB Clip

Polyamide cable ties available in black or white

H-MA Clip

To adjust height squeeze the spring steel component

H-Ti/T Clip

MTi - M6, M8 or M10 thread impression clips
T10 - 11 mm clearance hole for use with threaded rods up to 10 mm diameter
Can be used in combination with VKM or HM nuts

H-S Clip

Can be used with banding up to 25 mm max width
For installation parallel to the beam

H-SR Clip

With banding suspension component at 90° to the beam

H-Di Clip

Same general characteristics as the H-Clip

H-MSM Clip

Conduit clip securely locked into position with pliers
Clip will rotate 360°

H-PSM Clip

Conduit is pushed into position
Clip will rotate 360°

H-PiN Clip

Conduit is pushed into position

Applications

The H Clip range is extensive and includes the following:
- H Clip - for attaching or suspending services by chains or wires
- H-i Clip - for threaded rod suspensions
- H-iX Clip - for securing electrical services
- H-ST Clip - for retaining cables onto the beam flange
- H-RBMX Clip - for installation of communications and low voltage cables
- H-CA/H-CB Clips - for installation of unprotected copper cables
- H-CT Clip - for installation of cables with cable ties
- H-CTB Clip - for cable installation with polyamide or stainless steel locking cable ties
- H-MA Clip - for suspension of services with threaded rod
- H-Ti/T Clip - for suspension from beam with threaded rod
- H-S Clip - for installation with perforated banding or strapping
- H-SR Clip - as H-S Clip but with banding suspension
- H-Di Clip - for attaching electrical junction boxes
- H-MSM Clip - for securing conduits, pipes or cables to the side of beams
- H-PSM Clip - for securing conduit clips horizontally or vertically to beams
- H-PiN Clip - for attaching conduits inside the beam

More Information

H Clip - for attaching or suspending services by chains or wires

H-Clip dimensions H clip application

Description Part No. A mm Protection Pack Load

2H4 170010 2-3 4 100 70

4H24 170020 3-8 4 100 90

4H58 170030 8-14 4 100 90

4H912 170040 14-20 4 100 90

4H24-2 179610 3-8 2 100 65

4H58-2 179620 8-14 2 100 65

4H912-2 179630 14-20 2 100 65

H-i Clip - for threaded rod suspensions

H-i clip dimensions H-i clip application

Description	Part No.	A mm	Protection	Pack	Load
4H24i	170150	3-8	4	100	15
4H58i	170250	8-14	4	100	15

H-iX Clip - for securing electrical services

H-ix Clip dimensions H-ix clip application

Description	Part No.	A mm	Protection	Pack	Load
4H24iX	170140	3-8	4	100	15
4H58iX	170160	8-14	4	100	15

H-ST Clip - for retaining cables onto the beam flange

H-ST clip dimensions H-ST clip application

Description	Part No.	A mm	Protection	Pack
2H4ST3	173420	2-3	4	100
4H24ST3	171500	3-8	4	100
4H58ST3	171530	8-14	4	100
4H912ST3	171640	14-20	4	100
4H24ST3-2	171480	3-8	2	100
4H58ST3-2	171540	8-14	2	100
4H912ST3-2	171550	14-20	2	100

H-RBMX Clip - for installation of communications and low voltage cables

H-RBMX clip dimensions H-RBMX clip application

Description	Part No.	A mm	Ø mm	Protection	Pack
2H4RBMX	172760	2-3	10.5-12	4	100
4H24RBMX	172770	3-8	10.5-12	4	100
4H58RBMX	172780	8-14	10.5-12	4	100
4H912RBMX	172790	14-20	10.5-12	4	100

H-CA/H-CB Clips - for installation of unprotected copper cables

H-CA/CB clip dimensions H-RBMX clip application

Description	Part No.	A mm	Ø mm	Cables mm²	Protection	Pack
2H4/1012A	170460	2-3	10.9-13	70	4	100
4H24/1012A	170480	3-8	10.9-13	70	4	100
2H4/1214A	170470	2-3	12.4-16	95	4	100
4H24/1214A	170630	3-8	12.4-16	95	4	100
2H4/1012B	170830	2-3	10.9-13	70	4	100
4H24/1012B	170850	3-8	10.9-13	70	4	100
2H4/1214B	170840	2-3	12.4-16	95	4	100
4H24/1214B	170640	3-8	12.4-16	95	4	100

H-CT Clip - for installation of cables with cable ties

H-CT Clip dimensions H-CT clip application

Description	Part No.	A mm	Protection	Pack	Load
2H4CT	178510	2-3	4	100	15
4H24CT	178520	3-8	4	100	15
4H58CT	178530	8-14	4	100	15
4H912CT	178540	14-20	4	100	15

H-CTB Clip - for cable installation with polyamide or stainless steel locking cable ties

H-CTB Clip dimensions H-CTB clip application

Description	Part No.	A mm	B mm	Protection	Pack	Load
*White Tie*
2H4CTBW	170170	2-3	10-70	4	100	15
4H24CTBW	170180	3-8	10-70	4	100	15
4H58CTBW	170190	8-14	10-70	4	100	15
4H912CTBW	170200	14-20	10-70	4	100	15
*Black Tie*
2H4CTBB	170210	2-3	10-70	4	100	15
4H24CTBB	170220	3-8	10-70	4	100	15
4H58CTBB	170240	8-14	10-70	4	100	15
4H912CTBB	170260	14-20	10-70	4	100	15
*Stainless Steel*
2H24CTBR-2	170280	3-8	25-51	2	100	30
4H58CTBR-2	170300	8-14	25-51	2	100	30
4H912CTBR-2	170310	14-20	25-51	2	100	30

H-MA Clip - for suspension of services with threaded rod

H-MA Clip dimensions H-MA clip application

Description	Part No.	A mm	Ø	Protection	Pack	Load
M6MA4	173230	2-3	M6	4	100	60
M6MA24	173240	3-8	M6	4	100	60
M6MA58	173250	8-14	M6	4	100	60
M6MA912	173260	14-20	M6	4	100	60
M8MA4	173270	2-3	M8	4	100	70
M8MA24	173280	3-8	M8	4	100	70
M8MA58	173290	8-14	M8	4	100	70
M8MA912	173300	14-20	M8	4	100	70
M10MA4	173310	2-3	M10	4	100	70
M10MA24	173320	3-8	M10	4	100	70
M10MA58	173330	8-14	M10	4	100	70
M10MA912	173340	14-20	M10	4	100	70

H-Ti/T Clip - for suspension from beam with threaded rod

H-Ti/T Clip dimensions H-MA clip application

Description	Part No.	A mm	Ø 1 M/mm	Ø 2 mm	Protection	Pack	Load
M6Ti4	174810	2-3	M6	7	4	100	70
M6Ti24	174820	3-8	M6	7	4	100	90
M6Ti58	174830	8-14	M6	7	4	100	90
M6Ti912	174840	14-20	M6	7	4	100	90
M8Ti4	174900	2-3	M8	8.5	4	100	70
M8Ti24	174910	3-8	M8	8.5	4	100	90
M8Ti58	174920	9-14	M8	8.5	4	100	90
M8Ti912	74930	14-20	M8	8.5	4	100	90
M10Ti4	174990	2-3	M10	11	4	100	70
M10Ti24	175000	3-8	M10	11	4	100	90
M10Ti58	175010	8-14	M10	11	4	100	90
M10Ti912	175020	14-20	M10	11	4	100	90
T104	160000	2-3	11	11	4	100	70
T1024	160010	3-8	11	11	4	100	90
T1058	160020	8-14	11	11	4	100	90
T10912	160030	14-20	11	11	4	100	90

H-S Clip - for installation with perforated banding or strapping

H-S Clip dimensions H-S clip application

Description	Part No.	A mm	Protection	Pack	Size
S4	175480	2-3	4	100	70
S24	172030	3-8	4	100	90
S58	171760	8-14	4	100	90
S912	171770	14-20	4	100	90

H-SR Clip - as H-S Clip but with banding suspension

H-SR Clip dimensions H-SR clip application

Description	Part No.	A mm	Protection	Pack	Load
SR4	175540	2-3	4	100	70
SR24	171810	3-8	4	100	90
SR58	175550	8-14	4	100	90
SR912	172020	14-20	4	100	90

H-Di Clip - for attaching electrical junction boxes

H-Di Clip dimensions H-Di clip application

Description	Part No.	A mm	Ø mm	Protection	Pack	Size
4H24Di	350000	3-8	5	4	100	15

H-MSM Clip - for securing conduits, pipes or cables to the side of beams

H-MSM Clip dimensions H-MSM clip application

Description	Part No.	A mm	Ø mm	Protection	Pack	Load
6M4SM	173630	2-3	14-18	4	100	12
6M24SM	173640	3-8	14-18	4	100	12
6M58SM	171980	8-14	14-18	4	100	12
6M912SM	173650	14-20	14-18	4	100	12
812M4SM	160040	2-3	18-30	4	100	12
812M24SM	160050	3-8	18-30	4	100	12
812M58SM	160060	8-14	18-30	4	100	12
812M912SM	160070	14-20	18-30	4	100	12
16M4SM	173710	2-3	30-35	4	100	12
16M24SM	173720	3-8	30-35	4	100	12
16M58SM	173730	8-14	30-35	4	100	12
16M912SM	173740	14-20	30-35	4	50	12
20M4SM	173750	2-3	35-42	4	50	12
20M24SM	171720	3-8	35-42	4	50	12
20M58SM	173770	8-14	35-42	4	50	12
20M912SM	173780	14-20	35-42	4	50	12
24M4SM	173790	2-3	42-50	4	50	12
24M24SM	176690	3-8	42-50	4	50	12
24M58SM	173800	8-14	42-50	4	50	12
24M912SM	173810	14-20	42-50	4	50	12
32M4SM	173820	2-3	50-60	4	50	12
32M24SM	173830	3-8	50-60	4	50	12
32M58SM	173840	8-14	50-60	4	50	12
32M912SM	173850	14-20	50-60	4	50	12
8M24SM-2	179650	3-8	18-22	2	100	9
8M58SM-2	179660	8-14	18-22	2	100	9
8M912SM-2	179670	14-20	18-22	2	100	9
12M24SM-2	179690	3-8	22-30	2	100	9
12M58SM-2	179700	8-14	22-30	2	100	9
12M912SM-2	179710	14-20	22-30	2	100	9

H-PSM Clip - for securing conduit clips horizontally or vertically to beams

H-PSM Clip dimensions H-PSM clip application

Description	Part No.	A mm	Ø mm	Protection	Pack	Load
8P4SM	175170	2-3	18-22	4	100	7
8P24SM	175180	3-8	18-22	4	100	7
8P58SM	175190	8-14	18-22	4	100	7
8P912SM	175200	14-20	18-22	4	100	7
12P4SM	175210	2-3	22-30	4	100	7
12P24SM	175220	3-8	22-30	4	100	7
12P58SM	175230	8-14	22-30	4	100	7
12P912SM	175240	14-20	22-30	4	100	7
16P4SM	175250	2-3	30-35	4	100	7
16P24SM	175260	3-8	30-35	4	100	7
16P58SM	175270	8-14	30-35	4	100	7
16P912SM	175280	14-20	30-35	4	100	7

H-PiN Clip - for attaching conduits inside the beam

H-PiN Clip dimensions H-PiN clip application

Description	Part No.	A mm	Ø mm	Protection	Pack
8P4iN	175290	2-3	18-22	4	100
8P24iN	175300	3-8	18-22	4	100
8P58iN	175310	8-14	18-22	4	100
12P4iN	175320	2-3	22-30	4	100
16P4iN	175330	2-3	30-35	4	100

Due to a policy of continued product development, specifications are subject to change without notice.

CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH, and LENTON are registered trademarks of ERICO International Corporation.

Warning, Warranty and Limitation of Liability

WARNING
ERICO products shall be installed and used only as indicated in ERICO's product instruction sheets and training materials. Instruction sheets are available at www.erico.com and from your ERICO customer service representative. Improper installation, misuse, misapplication or other failure to completely follow ERICO's instructions and warnings may cause product malfunction, property damage, serious bodily injury and death.

WARRANTY
ERICO products are warranted to be free from defects in material and workmanship at the time of shipment. NO OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED (INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), SHALL EXIST IN CONNECTION WITH THE SALE OR USE OF ANY ERICO PRODUCTS. Claims for errors, shortages, defects or nonconformities ascertainable upon inspection must be made in writing within 5 days after Buyer's receipt of products. All other claims must be made in writing to ERICO within 6 months from the date of shipment or transport. Products claimed to be nonconforming or defective must, upon ERICO's prior written approval in accordance with its standard terms and procedures governing returns, promptly be returned to ERICO for inspection. Claims not made as provided above and within the applicable time period will be barred. ERICO shall in no event be responsible if the products have not been stored or used in accordance with its specifications and recommended procedures. ERICO will, at its option, either repair or replace nonconforming or defective products for which it is responsible or return the purchase price to the Buyer. THE FOREGOING STATES BUYER'S EXCLUSIVE REMEDY FOR ANY BREACH OF ERICO WARRANTY AND FOR ANY CLAIM, WHETHER SOUNDING IN CONTRACT, TORT OR NEGLIGENCE, FOR LOSS OR INJURY CAUSED BY THE SALE OR USE OF ANY PRODUCT.

LIMITATION OF LIABILITY
ERICO excludes all liability except such liability that is directly attributable to the willful or gross negligence of ERICO's employees. Should ERICO be held liable its liability shall in no event exceed the total purchase price under the contract. ERICO SHALL IN NO EVENT BE RESPONSIBLE FOR ANY LOSS OF BUSINESS OR PROFITS, DOWNTIME OR DELAY, LABOR, REPAIR OR MATERIAL COSTS OR ANY SIMILAR OR DISSIMILAR CONSEQUENTIAL LOSS OR DAMAGE INCURRED BY BUYER.