All CountriesChange

CADDYÂ® Clips for Threaded Rods

Print this page

ERICO offers CADDY Clips for Threaded Rods.

Features

MA/MA Hanger

For M6-M8-M10 threaded rods
Simply squeeze either spring steel component for height adjustment
Adjustment without having to dismantle equipment

K Clip

For cable or conduit diameters from 5 to 44 mm
The KX is used on M6 threaded rods (or 4, 6, 8 mm steel sheets)
EPZ corrosion protection

4Z34 Clip

2 thread impression holes
6.5 mm clearance hole
EPZ corrosion protection
Can be used in combination with HSC snap clips

4Z34-RBMX Clip

Same general characteristics as the 4Z/6Z34 clips
The cables are simply pushed into position

4Z34-M Clip

Same general characteristics as the 4Z/6Z34 clips
The conduit is locked secure with pliers

4Z34-CTS Clip

Ideal also for retrofitting
Easy to install (and to remove) without any tools
No extra fixings required
Will fit M6, M8 or M10 threaded rods
Ideal for communication, low voltage, or security cable installations
EPZ corrosion protection
Installation time dramatically reduced

Applications

A complete range of clips for installing services onto threaded rods.

More Information

MA/MA - For rapid accurate height adjustment of suspended services

Description Part No. Ã˜ Protection Pack Load

M6MAM6 173200 M6 4 100 60

M8MAM8 173210 M8 4 100 70

M10MAM10 173220 M10 4 100 70

K - For installing conduit or cable onto threaded rod, wire or beam profile

Description Part No. Ã˜ 1 mm Ã˜ 2 mm Protection Pack Load

KX 170870 5-10 4-8 4 100 -

K8 170660 14-18 4-6.5 4 100 22

K12 170670 19-25 4-6.5 4 100 22

K16 170680 25-32 4-6.5 4 100 22

K20 170690 35-44 4-6.5 4 100 22

4Z34 - For attaching electrical services to threaded rod

Description Part No. Ã˜ M D mm Protection Pack

4Z34 170650 M4-M8 6.5 4 100

6Z34 170720 M8-M12 6.5 4 100

4Z34-M - For attaching conduits, tubes and cables to threaded rod

Description Part No. Ã˜1 mm Ã˜2 M Protection Pack

4Z346M 171050 14-18 M4-M8 4 100

4Z34812M 171060 18-30 M4-M8 4 50

6Z346M 171080 14-18 M8-M12 4 100

6Z34812M 171090 18-30 M8-M12 4 50

4Z34-CTS - To suspend small cable trays directly from threaded rods

Description Part No. M Protection Pack Load

4Z34CTS 172950 M4 - M8 4 50 11

6Z34CTS 172960 M8 - M12 4 50 11

Availability

Europe/Middle East/Africa

Warning, Warranty and Limitation of Liability

WARNING
ERICO products shall be installed and used only as indicated in ERICO's product instruction sheets and training materials. Instruction sheets are available at www.erico.com and from your ERICO customer service representative. Improper installation, misuse, misapplication or other failure to completely follow ERICO's instructions and warnings may cause product malfunction, property damage, serious bodily injury and death.

WARRANTY
ERICO products are warranted to be free from defects in material and workmanship at the time of shipment. NO OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED (INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), SHALL EXIST IN CONNECTION WITH THE SALE OR USE OF ANY ERICO PRODUCTS. Claims for errors, shortages, defects or nonconformities ascertainable upon inspection must be made in writing within 5 days after Buyer's receipt of products. All other claims must be made in writing to ERICO within 6 months from the date of shipment or transport. Products claimed to be nonconforming or defective must, upon ERICO's prior written approval in accordance with its standard terms and procedures governing returns, promptly be returned to ERICO for inspection. Claims not made as provided above and within the applicable time period will be barred. ERICO shall in no event be responsible if the products have not been stored or used in accordance with its specifications and recommended procedures. ERICO will, at its option, either repair or replace nonconforming or defective products for which it is responsible or return the purchase price to the Buyer. THE FOREGOING STATES BUYER'S EXCLUSIVE REMEDY FOR ANY BREACH OF ERICO WARRANTY AND FOR ANY CLAIM, WHETHER SOUNDING IN CONTRACT, TORT OR NEGLIGENCE, FOR LOSS OR INJURY CAUSED BY THE SALE OR USE OF ANY PRODUCT.

LIMITATION OF LIABILITY
ERICO excludes all liability except such liability that is directly attributable to the willful or gross negligence of ERICO's employees. Should ERICO be held liable its liability shall in no event exceed the total purchase price under the contract. ERICO SHALL IN NO EVENT BE RESPONSIBLE FOR ANY LOSS OF BUSINESS OR PROFITS, DOWNTIME OR DELAY, LABOR, REPAIR OR MATERIAL COSTS OR ANY SIMILAR OR DISSIMILAR CONSEQUENTIAL LOSS OR DAMAGE INCURRED BY BUYER.

Due to a policy of continued product development, specifications are subject to change without notice.
CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH, and LENTON are registered trademarks of ERICO International Corporation.