CADDY® VF/J Clips

All CountriesChange

Availability

Asia/Australia

Europe/Middle East/Africa

CADDY® VF/J Clips

CADDY® VF/J Clips Print this page

The CADDY VF/J Clips are used for suspending services from angle section or purlins.

Features

VF Clip

For profiles of 1.5 to 6 mm thickness
EPZ corrosion protection
Can be used in combination with CADDY HSC Snap Clips

J Clip

Same general characteristics as the VF clip but used for purlin or angle section with a smaller return flange >10 mm
Maximum purlin angle 15° from vertical
Can be used in combination with HSC Snap Clip

J-RBMX Clip

Same general characteristics as the J clip
The cables are simply pushed into position

J-MA Clip

Same general characteristics as the J clip
For height adjustment simply squeeze the spring steel component
The load rating applies to the threaded rod vertically suspended

J-Ti/T Clip

MTi - M6, M8 or M10 thread impression clips
T10 - 11 mm clearance hole for use with threaded rods up to 10 mm diameter
Same general characteristics as the J clip

J-CT/CTB Clip

Type CT are supplied without cables ties
Type BW are supplied with WHITE cable ties
Type BB are supplied with BLACK cable ties
Same general characteristics as the J clip

Applications

VF Clip - for suspending services by chain or wire
J Clip - used for purlin or angle section with a smaller return flange
J-RBMX Clip
J-MA Clip - for use with threaded rods
J-Ti/T Clip - for use with threaded rods
J-CT/CTB Clip - for securing cables to purlin or angle section

More Information

CADDY® VF Clip Specifications

Description Part No. A mm Protection Pack Load

VF14 179850 1.5 - 6 4 100 60

CADDY® J Clip Specifications

Description Part # A mm Prot Pack Load

J1 170370 1.5-4 4 100 70

J2 171590 4-6.5 4 100 70

CADDY® J-RBMX Clip Specifications

Description Part No. A mm Ø mm Protection Pack

J1RBMX 172800 1.5-4 10.5-12 4 100

J2RBMX 172810 4-6.5 10.5-12 4 100

CADDY® J-MA Clip Specifications

Description Part No. A mm Ø Protection Pack Load

M6MAJ1 173350 1.5-4 M6 4 100 60

M8MAJ1 173360 1.5-4 M8 4 100 70

M10MAJ1 173370 1.5-4 M10 4 100 70

M6MAJ2 173380 4-6.5 M6 4 100 60

M8MAJ2 173390 4-6.5 M8 4 100 70

M10MAJ2 173400 4-6.5 M10 4 100 70

CADDY® J-Ti/T Clip Specifications

Description Part No. A mm Ø 1 M Ø 2 mm Protection Pack Load

M6TiJ1 174870 1.5-4 M6 7 4 100 70

M8TiJ1 174960 1.5-4 M8 8.5 4 100 70

M10TiJ1 175050 1.5-4 M10 11 4 100 70

M6TiJ2 174880 4-6.5 M6 7 4 100 70

M8TiJ2 174970 4-6.5 M8 8.5 4 100 70

M10TiJ2 75060 4-6.5 M10 11 4 100 70

T10J1 160220 1.5-4 11 11 4 100 70

T10J2 160230 4-6.5 11 11 4 100 70

CADDY® J-CT/CTB Clip Specifications

Description Part No. A mm D mm Protection Pack Load

J1CT 170610 1.5-4 10-71 4 100 15

J2CT 170350 4-6.5 10-71 4 100 15

J1CTBW 170360 1.5-4 10-71 4 100 15

J2CTBW 170390 4-6.5 10-71 4 100 15

J1CTBB 170410 1.5-4 10-71 4 100 15

J2CTBB 170440 4-6.5 10-71 4 100 15

Due to a policy of continued product development, specifications are subject to change without notice.

CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH, and LENTON are registered trademarks of ERICO International Corporation.

Warning, Warranty and Limitation of Liability

WARNING
ERICO products shall be installed and used only as indicated in ERICO's product instruction sheets and training materials. Instruction sheets are available at www.erico.com and from your ERICO customer service representative. Improper installation, misuse, misapplication or other failure to completely follow ERICO's instructions and warnings may cause product malfunction, property damage, serious bodily injury and death.

WARRANTY
ERICO products are warranted to be free from defects in material and workmanship at the time of shipment. NO OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED (INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), SHALL EXIST IN CONNECTION WITH THE SALE OR USE OF ANY ERICO PRODUCTS. Claims for errors, shortages, defects or nonconformities ascertainable upon inspection must be made in writing within 5 days after Buyer's receipt of products. All other claims must be made in writing to ERICO within 6 months from the date of shipment or transport. Products claimed to be nonconforming or defective must, upon ERICO's prior written approval in accordance with its standard terms and procedures governing returns, promptly be returned to ERICO for inspection. Claims not made as provided above and within the applicable time period will be barred. ERICO shall in no event be responsible if the products have not been stored or used in accordance with its specifications and recommended procedures. ERICO will, at its option, either repair or replace nonconforming or defective products for which it is responsible or return the purchase price to the Buyer. THE FOREGOING STATES BUYER'S EXCLUSIVE REMEDY FOR ANY BREACH OF ERICO WARRANTY AND FOR ANY CLAIM, WHETHER SOUNDING IN CONTRACT, TORT OR NEGLIGENCE, FOR LOSS OR INJURY CAUSED BY THE SALE OR USE OF ANY PRODUCT.

LIMITATION OF LIABILITY
ERICO excludes all liability except such liability that is directly attributable to the willful or gross negligence of ERICO's employees. Should ERICO be held liable its liability shall in no event exceed the total purchase price under the contract. ERICO SHALL IN NO EVENT BE RESPONSIBLE FOR ANY LOSS OF BUSINESS OR PROFITS, DOWNTIME OR DELAY, LABOR, REPAIR OR MATERIAL COSTS OR ANY SIMILAR OR DISSIMILAR CONSEQUENTIAL LOSS OR DAMAGE INCURRED BY BUYER.