CADWELD MULTI replaces over 35 separate molds with a single, universal mold crucible capable of performing a wide range of mold types. CADWELD MULTI performs conductor to ground rod weld types.
Features
Versatile mold offers variety of connections for grounding applications
Compact compression structure enables easy alignment of conductors
How It Works CADWELD MULTI uses a combination of a generic mold block and a range of disposable gaskets (batting). The gaskets are compressed around the conductors to allow numerous different welded connections to be produced - without the need to change the mold block for each connection type.
CADWELD MULTI Connection Capablities Note: the tables below use the following symbols to denote the number of batting (gaskets) layers required for each connection.
Requires 2 batting layers for weld
NOTES:
Requires 3 batting layers for weld
• For connections using a 3/4” ground rod, it is necessary to use #115 / 115PLUSF20 welding material (sold separately). • For all other connection types, use #90 or 90PLUSF20. • For connections using galvanized material, remove galvanizing before welding, for a better connection.
Copper Cable/Solid to Copper Cable/Solid
Copper concentric conductor sizes up to 50 mm2(9.3 mm dia.) or 1/0 AWG (0.37” dia.)
SS
SC
PA
TA
XA
GG
GJ
PP
PK
GE
PG
GF
GW
XB
Copper concentric conductor sizes up to 25mm2(6.6 mm dia.) or #3 AWG (0.26” dia.)
TD
TE
TF
Copper Cable/Solid Strip to Rebar
Copper concentric conductor sizes up to 50mm2(9.3 mm dia.) or 1/0 AWG (0.37” dia.) Copper or steel strip sizes up to 30 x 3,5 mm (1.2” x 0.14”) Rebar sizes up to 10 mm (#3)
RG
RH
RK
NEW
RD
Copper Strip to Copper Strip
BB and CG: Copper strip sizes up to 30 x 3,5 mm (1.2” x 0.14”) BG and EB: Copper strip sizes up to 30 x 3,0 mm (1.2” x 0.12”)
BB
CG
BG
EB
Copper Cable/Solid to Copper or Steel Strip/Lug
Copper concentric conductor sizes up to 50mm2(9.3 mm dia.) or 1/0 AWG (0.37” dia.) Copper or steel lug / strip sizes up to 30 x 3,5 mm (1.2” x 0.14”)
HA
HC
GL
LA
LJ
LE
HS
HT
Galvanized Steel Strip to Galvanized Steel Strip
Galvanized steel strip sizes up to 30 x 3,5 mm (1.2” x 0.14”)
BB
CG
Ground Rod Connections
Copper concentric conductor sizes up to 10mm2(4.2 mm dia.) or #6 AWG (0.18” dia.) Copper strip sizes up to 30 x 2,0 mm (1.2” x 0.08”)
TG
GT
CN
CP
GR
Copper concentric conductor sizes greater than 10mm2(4.2 mm dia.) or #6 AWG (0.18” dia.) Copper strip sizes 30 x (2,5 - 3,0 mm) or 1.2” x (0.10” – 0.12”) Steel strip sizes 30 x (0,5 - 3,5 mm) or 1.2” x (0.02” – 0.14”)
GT
CN
CP
GR
Ordering Information
Part No.
Article No.
Description
Pack Size
Weight (kg)
KITCDMV01
167782
CADWELD MULTI Kit
1
25.000
The CADWELD MULTI kit (KITCDMV01) contains the following list of items:
FMCDMV01
120883
Handle Clamp
1
1.800
CDMV01H
240399
Mold for H welds
1
1.200
CDMV0112
240398
Mold for welds on 1/2 rods
1
1.200
CDMV0158
240397
Mold for welds on 5/8 rods
1
1.200
CDMV0134
240396
Mold for welds on 3/4 rods*
1
1.200
SCDM01
120886
Set of 33 batting/gaskets
2
0.200
B399P
162070
SKK1 clamp
1
0.500
TSCSTP
197295
Toolset
1
2.000
B136B
182030
Slag Removal Spade
1
0.144
Language free instruction sheet
1
The following items can be used with the CADWELD MULTI Kit (KITCDMV01). They are sold separately.
Ordering Information
Part No.
Article No.
Description
Pack Size
Weight (kg)
T320
165000
Flint Ignitor T320
1
0.090
90
163040
CADWELD Traditional welding material
10
0.090
115
163050
CADWELD Traditional welding material
10
0.115
PLUSCU
165738
Control Unit
1
1.088
PLUS#90F20
165705
CADWELD PLUS welding material
10
0.158
PLUS#115F20
165706
CADWELD PLUS welding material
10
0.185
CDMV0138
240405
Mold for welds on 3/8" rods
1
0.513
Due to ERICO's continuous product improvement policy, products shown in this catalog are subject to change without notice. For further information, contact ERICO.
WARNING
ERICO products shall be installed and used only as indicated in ERICO's product instruction sheets and
training materials. Instruction sheets are available at www.erico.com and from your ERICO customer service
representative. Improper installation, misuse, misapplication or other failure to completely follow ERICO's
instructions and warnings may cause product malfunction, property damage, serious bodily injury and death.
WARRANTY
ERICO products are warranted to be free from defects in material and workmanship at the time of shipment.
NO OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED (INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE), SHALL EXIST IN CONNECTION WITH THE SALE OR USE OF ANY ERICO PRODUCTS. Claims for errors,
shortages, defects or nonconformities ascertainable upon inspection must be made in writing within 5 days
after Buyer's receipt of products. All other claims must be made in writing to ERICO within 6 months from the
date of shipment or transport. Products claimed to be nonconforming or defective must, upon ERICO's prior
written approval in accordance with its standard terms and procedures governing returns, promptly be returned
to ERICO for inspection. Claims not made as provided above and within the applicable time period will be
barred. ERICO shall in no event be responsible if the products have not been stored or used in accordance
with its specifications and recommended procedures. ERICO will, at its option, either repair or replace
nonconforming or defective products for which it is responsible or return the purchase price to the Buyer.
THE FOREGOING STATES BUYER'S EXCLUSIVE REMEDY FOR ANY BREACH OF ERICO WARRANTY AND FOR ANY CLAIM, WHETHER
SOUNDING IN CONTRACT, TORT OR NEGLIGENCE, FOR LOSS OR INJURY CAUSED BY THE SALE OR USE OF ANY PRODUCT.
LIMITATION OF LIABILITY
ERICO excludes all liability except such liability that is directly attributable to the willful or gross
negligence of ERICO's employees. Should ERICO be held liable its liability shall in no event exceed the
total purchase price under the contract. ERICO SHALL IN NO EVENT BE RESPONSIBLE FOR ANY LOSS OF BUSINESS OR
PROFITS, DOWNTIME OR DELAY, LABOR, REPAIR OR MATERIAL COSTS OR ANY SIMILAR OR DISSIMILAR CONSEQUENTIAL LOSS
OR DAMAGE INCURRED BY BUYER.
Due to a policy of continued product development, specifications are subject to change without notice.
CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH, and LENTON are registered trademarks of ERICO
International Corporation.
All Countries
Print this page
Requires 2 batting layers for weld
Requires 3 batting layers for weld
