CADDY® Deck Hanger and TDHP2 Punch
 CADDY® TDH hangers from ERICO® are a quick and
easy way to attach fasteners to metal decking. Just use the redesigned
TDHP2 Decking Hanger Punch to put holes in the decking, line up the
hanger and slide the retaining bar through the holes. It’s that simple.
With more features for easier operation, this improved one-piece hole
punch can be adjusted from 0.47” to 3.15” (12 mm to 80 mm) according to
individual requirements. To ensure trouble-free operation and removal,
the punch features press-fit ejector springs and a smooth-running,
patented transmission mechanism. The TDHP2 is ideal for corrugated
metal sheeting with a wall thickness up to 14 gauge (2 mm).
The hangers are ideal for suspending lights and hanging cable tray,
dropped ceilings and strut trapezes from overhead metal decking. They
are constructed from spring steel, which is durable, lightweight and
has high gripping power. TDH Decking Hangers are fully rated to hang
loads from roof decking, unlike screws, which are not load rated,
evaluated or approved to support vertical loads from roof decking.
Features
Deck Hanger
- Minimum roof decking sheet thickness of 24 gauge (0.63 mm)
- Maximum roof decking bottom web width of 2” (50 mm)
- 1/4” or 3/8” square section nut or 3/8” (10 mm) clearance hole
Punch
- Variable depth gauge of 0.47” to 3.15” (12 mm to 80 mm)
- Press-fit ejector springs help ensure trouble-free removal
- Smooth-running, patented transmission mechanism for easy operation
- For corrugated metal sheeting with a thickness up to 14 gauge (2 mm)
Applications
A quick and easy method for attaching fasteners to metal decking.
More Information
Check with deck manufacturer for recommended load capacity.
DownloadsAvailabilityNorth America
Latin America
Warning, Warranty and Limitation of Liability
WARNING
ERICO products shall be installed and used only as indicated in ERICO's product instruction sheets and
training materials. Instruction sheets are available at www.erico.com and from your ERICO customer service
representative. Improper installation, misuse, misapplication or other failure to completely follow ERICO's
instructions and warnings may cause product malfunction, property damage, serious bodily injury and death.
WARRANTY
ERICO products are warranted to be free from defects in material and workmanship at the time of shipment.
NO OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED (INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE), SHALL EXIST IN CONNECTION WITH THE SALE OR USE OF ANY ERICO PRODUCTS. Claims for errors,
shortages, defects or nonconformities ascertainable upon inspection must be made in writing within 5 days
after Buyer's receipt of products. All other claims must be made in writing to ERICO within 6 months from the
date of shipment or transport. Products claimed to be nonconforming or defective must, upon ERICO's prior
written approval in accordance with its standard terms and procedures governing returns, promptly be returned
to ERICO for inspection. Claims not made as provided above and within the applicable time period will be
barred. ERICO shall in no event be responsible if the products have not been stored or used in accordance
with its specifications and recommended procedures. ERICO will, at its option, either repair or replace
nonconforming or defective products for which it is responsible or return the purchase price to the Buyer.
THE FOREGOING STATES BUYER'S EXCLUSIVE REMEDY FOR ANY BREACH OF ERICO WARRANTY AND FOR ANY CLAIM, WHETHER
SOUNDING IN CONTRACT, TORT OR NEGLIGENCE, FOR LOSS OR INJURY CAUSED BY THE SALE OR USE OF ANY PRODUCT.
LIMITATION OF LIABILITY
ERICO excludes all liability except such liability that is directly attributable to the willful or gross
negligence of ERICO's employees. Should ERICO be held liable its liability shall in no event exceed the
total purchase price under the contract. ERICO SHALL IN NO EVENT BE RESPONSIBLE FOR ANY LOSS OF BUSINESS OR
PROFITS, DOWNTIME OR DELAY, LABOR, REPAIR OR MATERIAL COSTS OR ANY SIMILAR OR DISSIMILAR CONSEQUENTIAL LOSS
OR DAMAGE INCURRED BY BUYER.
Due to a policy of continued product development, specifications are subject to change without notice.
CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH, and LENTON are registered trademarks of ERICO
International Corporation.
|
All Countries
Print this page
