LENTON® Transition Couplers
 LENTON® Transition couplers are designed to splice different diameter bars where one bar can be rotated.
Features
- Unique self-aligning taper-threaded design provides continuity and structural integrity
- Spliced bars behave as continuous lengths of reinforcing steel
bars by providing full strength in tension, compression and stress
reversal applications
- Designed to withstand man-made blasts, and other seismic events
- Quick and easy to install
- Develops higher tensile strength than lap splicing
- Provides full load transfer with the slimmest and shortest coupler possible
Applications Designed to splice different diameter bars where one bar can be rotated
More Information
LENTON Transition Couplers - A2
Standard in North & Latin America, Asia, Australia
 |
A = Diameter
B = Length of coupler body
DL = Large bar engagement
DS = Small bar engagement |
* Use hex material (measured across the flats), others use round material.
LENTON Transition Couplers - R11
Standard in Europe, Middle East, Africa, Asia, Australia
 |
A = Diameter
B = Length of coupler body
DL = Large bar engagement
DS = Small bar engagement |
* Use hex material (measured across the flats), others use round material.
For applications where the coupler must be cast into an element for
later continuation of the reinforcing bar, ERICO supplies a range of
accessories to assist the user. In addition to the plastic caps
supplied with the couplers, steel screw-in caps are available to seal
the coupler end where the greater protection is required and
polycarbonate cap plugs are available for use with Form-Fixer plates
where a degree of tensile load must be restrained by the cap-plug.
Downloads
Warning, Warranty and Limitation of Liability
WARNING
ERICO products shall be installed and used only as indicated in ERICO's product instruction sheets and
training materials. Instruction sheets are available at www.erico.com and from your ERICO customer service
representative. Improper installation, misuse, misapplication or other failure to completely follow ERICO's
instructions and warnings may cause product malfunction, property damage, serious bodily injury and death.
WARRANTY
ERICO products are warranted to be free from defects in material and workmanship at the time of shipment.
NO OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED (INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE), SHALL EXIST IN CONNECTION WITH THE SALE OR USE OF ANY ERICO PRODUCTS. Claims for errors,
shortages, defects or nonconformities ascertainable upon inspection must be made in writing within 5 days
after Buyer's receipt of products. All other claims must be made in writing to ERICO within 6 months from the
date of shipment or transport. Products claimed to be nonconforming or defective must, upon ERICO's prior
written approval in accordance with its standard terms and procedures governing returns, promptly be returned
to ERICO for inspection. Claims not made as provided above and within the applicable time period will be
barred. ERICO shall in no event be responsible if the products have not been stored or used in accordance
with its specifications and recommended procedures. ERICO will, at its option, either repair or replace
nonconforming or defective products for which it is responsible or return the purchase price to the Buyer.
THE FOREGOING STATES BUYER'S EXCLUSIVE REMEDY FOR ANY BREACH OF ERICO WARRANTY AND FOR ANY CLAIM, WHETHER
SOUNDING IN CONTRACT, TORT OR NEGLIGENCE, FOR LOSS OR INJURY CAUSED BY THE SALE OR USE OF ANY PRODUCT.
LIMITATION OF LIABILITY
ERICO excludes all liability except such liability that is directly attributable to the willful or gross
negligence of ERICO's employees. Should ERICO be held liable its liability shall in no event exceed the
total purchase price under the contract. ERICO SHALL IN NO EVENT BE RESPONSIBLE FOR ANY LOSS OF BUSINESS OR
PROFITS, DOWNTIME OR DELAY, LABOR, REPAIR OR MATERIAL COSTS OR ANY SIMILAR OR DISSIMILAR CONSEQUENTIAL LOSS
OR DAMAGE INCURRED BY BUYER.
Due to a policy of continued product development, specifications are subject to change without notice.
CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH, and LENTON are registered trademarks of ERICO
International Corporation.
|
All Countries
Print this page