All CountriesChange

Fence and Gate Post Clamps

Fence and Gate Post ClampsPrint this page

Fence and Gate Post Clamps, part of the ERITECH® line of Facility Electrical Protection products from ERICO®, help protect your valuable facilities, equipment and personnel when lightning or other transient voltages occur.

Made from high-copper content alloy, the clamps connect to a ground conductor to bond all ground points together, eliminating ground loops and creating an equipotential plane. Part of the Six Point Plan of Protection, the Fence and Gate Post Clamps allow the ground conductor to dissipate energy into a low-impedance grounding system.

For added security, the tinned clamps provide a theft-deterrent appearance. All of the clamps feature stainless steel bolts, nuts and washers, and each clamp is marked with the corresponding part number and conductor range. The Fence and Gate Post Clamps are ideal for applications, such as lightning protection, fault current ground, signal reference grid and static ground.

Features

  • Made from high-copper content alloy
  • Tinned clamps provide a theft-deterrent appearance
  • Stainless steel bolts, nuts and washers included
  • Each part is marked with the corresponding part number and conductor range

Applications

Ideal for use in applications, such as lightning protection, fault current ground, signal reference grid and static ground, to help protect the facility, equipment and personnel when lightning or other transient voltages occur.

More Information

North American
Part Number
Pipe Size -
Imperial
Conductor Size
- Imperial
European
Article Number
Pipe Size -
Metric
Conductor Size -
Metric
FC073 1 1/2 in
4 Sol-2/0 Str
198401 40.0 mm 16.0 mm2 Str -
70.0 mm2 Str
FC074 1 1/2 in 2 Sol-
250 MCM Str
198402 40.0 mm 50.0 mm2 Str -
120.0 mm2 Str
FC075 2 in 4 Sol-2/0 Str 198403 50.0 mm 16.0 mm2 Str -
70.0 mm2 Str
FC076 2 in 2 Sol-
250 MCM Str
198404 50.0 mm 50.0 mm2 Str -
120.0 mm2 Str
FC078 2 1/2 in 4 Sol-
250 MCM Str
198406 65.0 mm 16.0 mm2 Str -
120.0 mm2 Str
FC079 3 in 4 Sol-2/0 Str 198407 80.0 mm 16.0 mm2 Str -
70.0 mm2 Str
FC080 3 in 2 Sol-
250 MCM Str
198408 80.0 mm 50.0 mm2 Str -
120.0 mm2 Str
FC082 3 1/2 in 4 Sol-2/0 Str 198411 90.0 mm 16.0 mm2 Str -
120.0 mm2 Str

Downloads

Due to a policy of continued product development, specifications are subject to change without notice.
CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH, and LENTON are registered trademarks of ERICO International Corporation.