|
|
SBT18 Multiple Conduit Mounting Plate
 The SBT18 Multiple Conduit Mounting Plate, part of the CADDY® line of fasteners from ERICO, enables contractors to install up to three runs of conduit on a variety of surfaces, including beams, purlins, metal and wood studs, and plain and threaded rods.
Traditionally, contractors use a time-consuming method to run conduit that involves cutting lengths of strut, clamping those lengths to the mounting surface and using strut clamps to attach the conduit. The SBT18 provides for quick and easy snap-in attachment of up to three conduit clips and requires no tools for installation. And, when compared to a traditional conduit installation, the SBT18 offers over 80% savings on material and labor.
The SBT18 is available in a variety of pre-riveted assemblies, including hammer-on, beam clamp and multi-function clip. When used with a footed box support, the SBT18 facilitates conduit runs below raised floors.
The versatile mounting plate installs horizontally or vertically. It aligns with standard 1-1/2" deep electrical box knockouts and mounting holes. Because of this, the SBT18 eliminates conduit bends for 1/2" and 3/4" sizes.
Features - Affixes up to three conduit clips with an easy snap-in attachment
- Installs without tools
- Aligns with standard 1-1/2” deep electrical box knockouts and mounting holes
- Eliminates conduit bend for 1/2” and 3/4” sizes
- Comes in a variety of riveted assemblies
- Installs horizontally or vertically
- Attaches to footed box supports for applications below raised floors
Applications For installing up to three runs of conduit on a variety of surfaces, including beams, purlins, metal and wood studs, and plain and threaded rods.
More Information Cost Comparison: SBT18 vs. Traditional Conduit Installation
The following example demonstrates the significant savings of both material and labor associated with the SBT18. This example compares the costs of installing three 10-ft lengths of conduit to the underside of a beam, attached at both ends. Traditional Method (Using Strut)
Tools Needed: Wrench and Screwdriver
Material: (Costs come from ERICO price sheets)
SBT18 Method
Tools Needed: Hammer
Material: (Costs come from ERICO price sheets)
Labor: (Costs come from 2005 RS Means book for Cleveland, OH USA)
Total Installed Cost = $25.76 + $9.02 = $34.78
Labor: (Costs come from 2005 RS Means book for Cleveland, OH USA)
Total Installed Cost = $4.34 + $1.43 = $5.77
Total Savings = $34.78 - $5.77 = $29.01 = >80%
DownloadsAvailabilityNorth America
Latin America
Warning, Warranty and Limitation of Liability
WARNING
ERICO products shall be installed and used only as indicated in ERICO's product instruction sheets and
training materials. Instruction sheets are available at www.erico.com and from your ERICO customer service
representative. Improper installation, misuse, misapplication or other failure to completely follow ERICO's
instructions and warnings may cause product malfunction, property damage, serious bodily injury and death.
WARRANTY
ERICO products are warranted to be free from defects in material and workmanship at the time of shipment.
NO OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED (INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE), SHALL EXIST IN CONNECTION WITH THE SALE OR USE OF ANY ERICO PRODUCTS. Claims for errors,
shortages, defects or nonconformities ascertainable upon inspection must be made in writing within 5 days
after Buyer's receipt of products. All other claims must be made in writing to ERICO within 6 months from the
date of shipment or transport. Products claimed to be nonconforming or defective must, upon ERICO's prior
written approval in accordance with its standard terms and procedures governing returns, promptly be returned
to ERICO for inspection. Claims not made as provided above and within the applicable time period will be
barred. ERICO shall in no event be responsible if the products have not been stored or used in accordance
with its specifications and recommended procedures. ERICO will, at its option, either repair or replace
nonconforming or defective products for which it is responsible or return the purchase price to the Buyer.
THE FOREGOING STATES BUYER'S EXCLUSIVE REMEDY FOR ANY BREACH OF ERICO WARRANTY AND FOR ANY CLAIM, WHETHER
SOUNDING IN CONTRACT, TORT OR NEGLIGENCE, FOR LOSS OR INJURY CAUSED BY THE SALE OR USE OF ANY PRODUCT.
LIMITATION OF LIABILITY
ERICO excludes all liability except such liability that is directly attributable to the willful or gross
negligence of ERICO's employees. Should ERICO be held liable its liability shall in no event exceed the
total purchase price under the contract. ERICO SHALL IN NO EVENT BE RESPONSIBLE FOR ANY LOSS OF BUSINESS OR
PROFITS, DOWNTIME OR DELAY, LABOR, REPAIR OR MATERIAL COSTS OR ANY SIMILAR OR DISSIMILAR CONSEQUENTIAL LOSS
OR DAMAGE INCURRED BY BUYER.
Due to a policy of continued product development, specifications are subject to change without notice.
CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH, and LENTON are registered trademarks of ERICO
International Corporation.
|
All Countries
Print this page
