CADDY® SFCLT Seismic Fixture Clamp
The CADDY® SFCLT Seismic Fixture Clamps - part of the CADDY line of fixing and fastening products from ERICO® - attach fixtures securely to the ceiling frame member. This set of reinforcing clamps prevents the T-bar from twisting and disconnecting at the T-Bar intersections in a seismic event. The clamps also prevent the fixture from separating from the T-bar framework. Complies with ICBO Acceptance Criteria 184.
- Cost effective
- Secures fixtures to the ceiling frame members
- Requires no additional chains, cables or slack wires attached to the fixture
- Strengthens integrity of the T-Bar system
- Holds in place against the force of standard fire-hose pressure
- Meets the U.S. building code and electrical code specifications
- Satisfies NEC® 410.16(C) positive attachment for secure fastening of luminaires (fixtures)
The CADDY SFCLT family of light fixture clamps consists of connectors for 2' x 4' and 2' x 2' light fixtures, as well as for end-to-end and side-by-side connections of light fixtures and for reinforcement of T-Bar main runner joints. In addition, they can be used to secure 2' x 2' air diffusers.
The clamps attach fixtures securely at T-Bar intersections.
The CADDY SFCLT clamps install quickly and easily to the T-bar with two screws.
The product has been tested for compliance to IBC®, UBC, NEC®, NBC and CEC® standards. It is listed by Warnock Hersey and ETL*, conforms to UL® 1598 and certified to CSA® C22.2 No. 250.00 (Component Only).
Independent from seismic applications, the CADDY SFCLT clamps may be used to satisfy the requirement of NEC 410.16(C) positive attachment, for secure fastening of luminaires (fixtures) complying with Acceptance Criteria 184.
| PART NUMBER
|| QUANTITY PER BOX
|| WT. BOX (LBS.)|
||Seismic Fixture Lighting Clamp (set of 4) for one standard tapered 2' x 4' light fixture
|| 25 sets
||Seismic Fixture Lighting Clamp (set of 2) for two standard tapered 2' x 4' light fixtures end-to-end. In addition, a set of SFCLT is required.
|| 25 sets
||Seismic Fixture Lighting Clamp (set of 2) for two standard tapered 2' x 4' light fixtures side-by-side. In addition, a set of SFCLT is required.
|| 25 sets
||Seismic Fixture Lighting Clamp (set of 2) for one 2' x 2' light fixture. In addition, a set of SFCLT is required.
|| 50 sets
||Seismic Fixture Lighting Clamp (set of 2) for reinforcement of T-Bar main runner joints.
|| 100 sets
*ETL is a listed mark of Intertek Testing Services, NA.
Warning, Warranty and Limitation of Liability
ERICO products shall be installed and used only as indicated in ERICO's product instruction sheets and
training materials. Instruction sheets are available at www.erico.com and from your ERICO customer service
representative. Improper installation, misuse, misapplication or other failure to completely follow ERICO's
instructions and warnings may cause product malfunction, property damage, serious bodily injury and death.
ERICO products are warranted to be free from defects in material and workmanship at the time of shipment.
NO OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED (INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE), SHALL EXIST IN CONNECTION WITH THE SALE OR USE OF ANY ERICO PRODUCTS. Claims for errors,
shortages, defects or nonconformities ascertainable upon inspection must be made in writing within 5 days
after Buyer's receipt of products. All other claims must be made in writing to ERICO within 6 months from the
date of shipment or transport. Products claimed to be nonconforming or defective must, upon ERICO's prior
written approval in accordance with its standard terms and procedures governing returns, promptly be returned
to ERICO for inspection. Claims not made as provided above and within the applicable time period will be
barred. ERICO shall in no event be responsible if the products have not been stored or used in accordance
with its specifications and recommended procedures. ERICO will, at its option, either repair or replace
nonconforming or defective products for which it is responsible or return the purchase price to the Buyer.
THE FOREGOING STATES BUYER'S EXCLUSIVE REMEDY FOR ANY BREACH OF ERICO WARRANTY AND FOR ANY CLAIM, WHETHER
SOUNDING IN CONTRACT, TORT OR NEGLIGENCE, FOR LOSS OR INJURY CAUSED BY THE SALE OR USE OF ANY PRODUCT.
LIMITATION OF LIABILITY
ERICO excludes all liability except such liability that is directly attributable to the willful or gross
negligence of ERICO's employees. Should ERICO be held liable its liability shall in no event exceed the
total purchase price under the contract. ERICO SHALL IN NO EVENT BE RESPONSIBLE FOR ANY LOSS OF BUSINESS OR
PROFITS, DOWNTIME OR DELAY, LABOR, REPAIR OR MATERIAL COSTS OR ANY SIMILAR OR DISSIMILAR CONSEQUENTIAL LOSS
OR DAMAGE INCURRED BY BUYER.
Due to a policy of continued product development, specifications are subject to change without notice.
CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH, and LENTON are registered trademarks of ERICO