TDS MT - Transient Discriminating MOVTEC

All CountriesChange

Datasheets, Brochures and Catalog Sections

TDS MT & TDS MPM data sheet

Availability

North America

Latin America

Asia/Australia

Europe/Middle East/Africa

TDS MT - Transient Discriminating MOVTEC

TDS MT - Transient Discriminating MOVTEC Print this page

The TDS-MOVTEC family of surge diverters offers economical and reliable protection from voltage transients in even the most strenuous applications.

The small foot print provides integrators and OEMs with an effective use of real estate when installing within panels and equipment.

Transient Discriminating (TD) Technology, which meets the safety standards of UL®1449 Edition 3, provides a superior life by eliminating the common temporary over-voltage failure mode of most SPDs. TD Technology is essential for any site where abnormal over-voltages can occur or where the possible catastrophic failure of traditional technologies can not be tolerated.

Alarm contacts are provided which may be used to shut down the system or to activate an external warning if the internal surge material is below optimum condition.

Features

Transient Discriminating (TD) Technology – provides increased service life
Primary protection – suitable for high exposure sites and point-of-entry protection applications
TDS-MT configurable to L-L, L-N, L-G or N-G protection
TDS-MTU provides simultaneous L-N, L-G & N-G protection
Small foot print – effective use of real estate
5 segment electronic status indication – displays percentage of capacity remaining
CE, UL® 1449 Ed. 3 Listed

Applications

More Information

Part No.	Description	Surge Rated to Meet
TDSMT120	110-120V, 80kA, 1 Mode	ANSI®/IEEE® C62.41.2 Cat A, Cat B, Cat C ANSI®/IEEE® C62.41.2 Scenario II, Exposure 3, 100kA 8/20µs, 10kA 10/350µs UL® 1449 Ed3 In 20kA mode
TDSMT277	230-277V, 80kA, 1 Mode
TDSMTU277	230-277V, 80kA, 3 Modes (L-G, L-N, N-G)	ANSI®/IEEE® C62.41.2 Cat A, Cat B, Cat C

Approvals:
AS3260, C-Tick, IEC® 950, UL® 1449 Ed 3 Recognized Component Type 2

ANSI is a registered trademark of the American National Standards Institute. IEEE is a registered trademark of the Institute of Electrical and Electronics Engineers, Incorporated. IEC is a registered trademark of the International Electrotechnical Commission. UL is a registered trademark of Underwriters Laboratories, Inc.

Due to a policy of continued product development, specifications are subject to change without notice.

CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH, and LENTON are registered trademarks of ERICO International Corporation.

Warning, Warranty and Limitation of Liability

WARNING
ERICO products shall be installed and used only as indicated in ERICO's product instruction sheets and training materials. Instruction sheets are available at www.erico.com and from your ERICO customer service representative. Improper installation, misuse, misapplication or other failure to completely follow ERICO's instructions and warnings may cause product malfunction, property damage, serious bodily injury and death.

WARRANTY
ERICO products are warranted to be free from defects in material and workmanship at the time of shipment. NO OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED (INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), SHALL EXIST IN CONNECTION WITH THE SALE OR USE OF ANY ERICO PRODUCTS. Claims for errors, shortages, defects or nonconformities ascertainable upon inspection must be made in writing within 5 days after Buyer's receipt of products. All other claims must be made in writing to ERICO within 6 months from the date of shipment or transport. Products claimed to be nonconforming or defective must, upon ERICO's prior written approval in accordance with its standard terms and procedures governing returns, promptly be returned to ERICO for inspection. Claims not made as provided above and within the applicable time period will be barred. ERICO shall in no event be responsible if the products have not been stored or used in accordance with its specifications and recommended procedures. ERICO will, at its option, either repair or replace nonconforming or defective products for which it is responsible or return the purchase price to the Buyer. THE FOREGOING STATES BUYER'S EXCLUSIVE REMEDY FOR ANY BREACH OF ERICO WARRANTY AND FOR ANY CLAIM, WHETHER SOUNDING IN CONTRACT, TORT OR NEGLIGENCE, FOR LOSS OR INJURY CAUSED BY THE SALE OR USE OF ANY PRODUCT.

LIMITATION OF LIABILITY
ERICO excludes all liability except such liability that is directly attributable to the willful or gross negligence of ERICO's employees. Should ERICO be held liable its liability shall in no event exceed the total purchase price under the contract. ERICO SHALL IN NO EVENT BE RESPONSIBLE FOR ANY LOSS OF BUSINESS OR PROFITS, DOWNTIME OR DELAY, LABOR, REPAIR OR MATERIAL COSTS OR ANY SIMILAR OR DISSIMILAR CONSEQUENTIAL LOSS OR DAMAGE INCURRED BY BUYER.