TEB23 Electrical Box Bracket
 The TEB23 bracket, part of the CADDY® line of fasteners from ERICO®, offers an easy-to-install method for mounting 4” or 4-11/16” electrical boxes or plaster rings in low-voltage applications.
The TEB23 can be used with 2-1/2” and 3-5/8” deep studs and features two far-side supports for increased stability after installation. The supports also have feet to help prevent damaging the drywall.
The patent-pending design of the TEB23 features round and octagon-shaped keyholes to quickly and easily identify the location of the electrical boxes. Box locking tabs securely hold the electrical boxes in place to prevent disassembly during shipment. To benefit both the installer and pre-fabricator, the TEB23 can be mounted from any side of the bracket. The TEB23 is cULus® Pending.
Features - Mounts 4” or 4-11/16” electrical boxes or plaster rings for low-voltage applications
- Fits 2-1/2” and 3-5/8” deep studs
- Designed with two far-side supports for added stability
- Feet on the far-side supports help prevent damage to the drywall
- Easily identify mounting orientation of electrical boxes. Round keyholes for 4-11/16” boxes and octagonal keyholes for 4” boxes
- Can be mounted to stud on all four sides
- Box locking tabs securely lock electrical boxes in place to prevent disassembly during shipment
- Patent-pending design
- cULus® Pending
Applications The TEB23 bracket offers an easy-to-install method for mounting 4” or 4-11/16” electrical boxes or plaster rings in low-voltage applications.
More Information
DownloadsRelated ProductsAvailabilityNorth America
Warning, Warranty and Limitation of Liability
WARNING
ERICO products shall be installed and used only as indicated in ERICO's product instruction sheets and
training materials. Instruction sheets are available at www.erico.com and from your ERICO customer service
representative. Improper installation, misuse, misapplication or other failure to completely follow ERICO's
instructions and warnings may cause product malfunction, property damage, serious bodily injury and death.
WARRANTY
ERICO products are warranted to be free from defects in material and workmanship at the time of shipment.
NO OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED (INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE), SHALL EXIST IN CONNECTION WITH THE SALE OR USE OF ANY ERICO PRODUCTS. Claims for errors,
shortages, defects or nonconformities ascertainable upon inspection must be made in writing within 5 days
after Buyer's receipt of products. All other claims must be made in writing to ERICO within 6 months from the
date of shipment or transport. Products claimed to be nonconforming or defective must, upon ERICO's prior
written approval in accordance with its standard terms and procedures governing returns, promptly be returned
to ERICO for inspection. Claims not made as provided above and within the applicable time period will be
barred. ERICO shall in no event be responsible if the products have not been stored or used in accordance
with its specifications and recommended procedures. ERICO will, at its option, either repair or replace
nonconforming or defective products for which it is responsible or return the purchase price to the Buyer.
THE FOREGOING STATES BUYER'S EXCLUSIVE REMEDY FOR ANY BREACH OF ERICO WARRANTY AND FOR ANY CLAIM, WHETHER
SOUNDING IN CONTRACT, TORT OR NEGLIGENCE, FOR LOSS OR INJURY CAUSED BY THE SALE OR USE OF ANY PRODUCT.
LIMITATION OF LIABILITY
ERICO excludes all liability except such liability that is directly attributable to the willful or gross
negligence of ERICO's employees. Should ERICO be held liable its liability shall in no event exceed the
total purchase price under the contract. ERICO SHALL IN NO EVENT BE RESPONSIBLE FOR ANY LOSS OF BUSINESS OR
PROFITS, DOWNTIME OR DELAY, LABOR, REPAIR OR MATERIAL COSTS OR ANY SIMILAR OR DISSIMILAR CONSEQUENTIAL LOSS
OR DAMAGE INCURRED BY BUYER.
Due to a policy of continued product development, specifications are subject to change without notice.
CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH, and LENTON are registered trademarks of ERICO
International Corporation.
|
All Countries
Print this page
