CADWELD® XBQ/XBZ Molds

All CountriesChange

Datasheets, Brochures and Catalog Sections

ERITECH CADWELD XB Molds - For Horizontal Lapped X Connections Datasheet

Related Products

CADWELDÂ® Welded Electrical Connections

Availability

North America

Latin America

Asia/Australia

Europe/Middle East/Africa

CADWELDÂ® XBQ/XBZ Molds

CADWELD® XBQ/XBZ Molds Print this page

For cable-to-cable X-style connections at power substations and other commercial and industrial sites, there's never been a faster or easier way to make a reliable CADWELDÂ® connection. This new two-piece mold lets you make connections in a trench in about half the time it would take with compression connectors or other exothermic products - and at a fraction of the cost.

Features

Ergonomic two-piece molds use standard L160 and L159 handle clamps - the same clamps you use with other CADWELD molds
Saves labor costs - X-style connection can be made by one person in about 1 minute - 40-70% faster than other methods
Costs less, saves you 1/3 over other models, thanks to innovative design techniques and advanced manufacturing technology
Simple to use - operates just like an XA-style mold, but there's no need to cut the cable!
Easy cable alignment
Also available in "smokeless" EXOLON
Wear plate option now available for XBQ2Q2Q and XBQ2G2G molds!

Applications

The new CADWELD XB molds are the quickest, most efficient way to make lapped, horizontal X-style connections on solid or concentric stranded cable for a variety of installations.

More Information

CADWELDÂ® XB Mold Installation Instructions. Easy as 1, 2, 3!

Step 1
Position clean, dry cables in mold and close clamp. Step 2
Insert disk, insert pour weld metal and starter material into crucible, and ignite to form the weld. Step 3
Remove finished connection. Clean mold.

Ordering Information

Copper - AWG

Cable Size* Mold Part No. Weld Metal

Run Tap

1/0 SOL 1/0 SOL XBQ2B2B #150

1/0 CONC 1/0 CONC XBQ2C2C #150

2/0 SOL 2/0 SOL XBQ2F2F #200

2/0 CONC 2/0 CONC XBQ2G2G #200

3/0 SOL 3/0 SOL XBQ2K2K #250

3/0 CONC 3/0 CONC XBQ2L2L #250

4/0 SOL 4/0 SOL XBQ2P2P #250

4/0 CONC 4/0 CONC XBQ2Q2Q #250

250 SOL 250 SOL XBQ2T2T 2-#150

250 CONC 250 CONC XBQ2V2V 2-#150

300 CONC 300 CONC XBZ3A3A 2-#200

350 CONC 350 CONC XBZ3D3D #500

400 CONC 400 CONC XBZ3H3H 3-#200

500 CONC 500 CONC XBZ3Q3Q 3-#250

Copper - Metric

Conductor Stranding Mold Part No. Weld Metal

25 7/2.14 XBCY1Y1 #65

35 19/1.53 XBCY2Y2 #90

50 19/1.78 XBCY3Y3 #150

70 19/2.14 XBQY4Y4 #200

95 37/1.78 XBQY5Y5 #200

120 37/2.03 XBQY6Y6 2-#150

150 37/2.25 XBZY7Y7 2-#200

185 37/2.52 XBZY8Y8 #500

240 61/2.25 XBZY9Y9 3-#250

300 61/2.52 XBZY0Y0 3-#250

COPPERWELDÂ®

Cable Size* Mold Part No. Weld Metal

Run Tap

7/#7 7/#7 XBQ9C9C #200

7/#5 7/#5 XBQ9E9E #250

19/#9 19/#9 XBQ9F9F 2-#150

19/#8 19/#8 XBZ9G9G 2-#200

19/#7 19/#7 XBZ9H9H #500

19/#6 19/#6 XBZ9J9J 3-#250
*Consult factory for molds to fit other cable sizes or run/tap combinations.

NOTES:

XBQ2Q2Q and XBQ2G2G molds are available with wear plates.
Special cleaning tool supplied with each mold.
All Q molds require L160 Handle Clamp.
All Z price molds require L159 Handle Clamp.

Copperweld is a registered trademark of Copperweld Corporation.

Due to a policy of continued product development, specifications are subject to change without notice.

CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH, and LENTON are registered trademarks of ERICO International Corporation.

Warning, Warranty and Limitation of Liability

WARNING
ERICO products shall be installed and used only as indicated in ERICO's product instruction sheets and training materials. Instruction sheets are available at www.erico.com and from your ERICO customer service representative. Improper installation, misuse, misapplication or other failure to completely follow ERICO's instructions and warnings may cause product malfunction, property damage, serious bodily injury and death.

WARRANTY
ERICO products are warranted to be free from defects in material and workmanship at the time of shipment. NO OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED (INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), SHALL EXIST IN CONNECTION WITH THE SALE OR USE OF ANY ERICO PRODUCTS. Claims for errors, shortages, defects or nonconformities ascertainable upon inspection must be made in writing within 5 days after Buyer's receipt of products. All other claims must be made in writing to ERICO within 6 months from the date of shipment or transport. Products claimed to be nonconforming or defective must, upon ERICO's prior written approval in accordance with its standard terms and procedures governing returns, promptly be returned to ERICO for inspection. Claims not made as provided above and within the applicable time period will be barred. ERICO shall in no event be responsible if the products have not been stored or used in accordance with its specifications and recommended procedures. ERICO will, at its option, either repair or replace nonconforming or defective products for which it is responsible or return the purchase price to the Buyer. THE FOREGOING STATES BUYER'S EXCLUSIVE REMEDY FOR ANY BREACH OF ERICO WARRANTY AND FOR ANY CLAIM, WHETHER SOUNDING IN CONTRACT, TORT OR NEGLIGENCE, FOR LOSS OR INJURY CAUSED BY THE SALE OR USE OF ANY PRODUCT.

LIMITATION OF LIABILITY
ERICO excludes all liability except such liability that is directly attributable to the willful or gross negligence of ERICO's employees. Should ERICO be held liable its liability shall in no event exceed the total purchase price under the contract. ERICO SHALL IN NO EVENT BE RESPONSIBLE FOR ANY LOSS OF BUSINESS OR PROFITS, DOWNTIME OR DELAY, LABOR, REPAIR OR MATERIAL COSTS OR ANY SIMILAR OR DISSIMILAR CONSEQUENTIAL LOSS OR DAMAGE INCURRED BY BUYER.