CADDY┬« ROD LOCK Channel Nut
CADDY┬« ROD LOCK is an innovative mounting system that simplifies the installation of threaded rod. The system includes the CADDY ROD LOCK beam clamp, channel nut and an anchor screw. The CADDY ROD LOCK system features a breakthrough "push-install" design - simply push the threaded rod through the mounting hole and it instantly locks into position.
The CADDY ROD LOCK channel nut helps to reduce the installation time of threaded rod by up to 34% when installing electrical and mechanical systems. It can be used on threaded rod with slightly damaged threads and minor burrs, helping to save time by minimizing the amount of deburring that is usually required prior to installation.
The channel nut has a load capacity up to 750 lbs (3/8" rod) or 3750 N (M8, M10 rod) and features an electro-galvanized finish for superior corrosion protection.
Works with slightly damaged threads and minor burrs on the threaded rod
Reduces installation time up to 34%
Load capacity up to 750 lbs (3/8" rod) or 3750 N (M8, M10 rod)
3:1 Safety Factor
The CADDY ROD LOCK channel nut works with slightly damaged threads and minor burrs on the threaded rod and helps to reduce installation time by up to 34%.
||3/8" CADDY┬« ROD LOCK
For use on plain and electro-galvanized (EG) hardware only.
ASTM┬« A307 Grades A-C, ISO┬« 898 Grades 4-6.
CADDY┬« ROD LOCK Informational Video Duration: 2m 52s
Warning, Warranty and Limitation of Liability
ERICO products shall be installed and used only as indicated in ERICO's product instruction sheets and
training materials. Instruction sheets are available at www.erico.com and from your ERICO customer service
representative. Improper installation, misuse, misapplication or other failure to completely follow ERICO's
instructions and warnings may cause product malfunction, property damage, serious bodily injury and death.
ERICO products are warranted to be free from defects in material and workmanship at the time of shipment.
NO OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED (INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE), SHALL EXIST IN CONNECTION WITH THE SALE OR USE OF ANY ERICO PRODUCTS. Claims for errors,
shortages, defects or nonconformities ascertainable upon inspection must be made in writing within 5 days
after Buyer's receipt of products. All other claims must be made in writing to ERICO within 6 months from the
date of shipment or transport. Products claimed to be nonconforming or defective must, upon ERICO's prior
written approval in accordance with its standard terms and procedures governing returns, promptly be returned
to ERICO for inspection. Claims not made as provided above and within the applicable time period will be
barred. ERICO shall in no event be responsible if the products have not been stored or used in accordance
with its specifications and recommended procedures. ERICO will, at its option, either repair or replace
nonconforming or defective products for which it is responsible or return the purchase price to the Buyer.
THE FOREGOING STATES BUYER'S EXCLUSIVE REMEDY FOR ANY BREACH OF ERICO WARRANTY AND FOR ANY CLAIM, WHETHER
SOUNDING IN CONTRACT, TORT OR NEGLIGENCE, FOR LOSS OR INJURY CAUSED BY THE SALE OR USE OF ANY PRODUCT.
LIMITATION OF LIABILITY
ERICO excludes all liability except such liability that is directly attributable to the willful or gross
negligence of ERICO's employees. Should ERICO be held liable its liability shall in no event exceed the
total purchase price under the contract. ERICO SHALL IN NO EVENT BE RESPONSIBLE FOR ANY LOSS OF BUSINESS OR
PROFITS, DOWNTIME OR DELAY, LABOR, REPAIR OR MATERIAL COSTS OR ANY SIMILAR OR DISSIMILAR CONSEQUENTIAL LOSS
OR DAMAGE INCURRED BY BUYER.
Due to a policy of continued product development, specifications are subject to change without notice.
CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH, and LENTON are registered trademarks of ERICO