United StatesChange
CADDY

401 Clevis Hanger

Features

  • Recommended for the suspension of stationary non-insulated pipe lines
  • Also commonly used for the suspension of insulated pipe lines
  • Flared edges help prevent sharp surfaces from coming into contact with the pipe (1/2" to 2" pipe sizes)
  • Clevis bottom pivots to allow pipe to be fed from either direction
  • Conforms with U.S. Federal Specification WW-H-171 (Type 1), Manufacturers Standardization Society (MSS) SP-58 (Type 1)

Specifications

Material: Steel
Finish: Electrogalvanized; Pregalvanized
Part Number Pipe Size Outer DiameterOD Rod SizeRS A B C Static LoadF Certifications
4010050EG 1/2" 0.840" 3/8" 2 5/16" 1 1/8" 3/8" 600 lb cULus
4010075EG 3/4" 1.050" 3/8" 2 1/2" 1 1/4" 3/8" 600 lb cULus, FM
4010100EG 1" 1.315" 3/8" 2 13/16" 1 3/8" 3/8" 600 lb cULus, FM
4010125EG 1 1/4" 1.660" 3/8" 3 1/8" 1 9/16" 3/8" 600 lb cULus, FM
4010150EG 1 1/2" 1.900" 3/8" 3 11/16" 2 1/16" 11/16" 600 lb cULus, FM
4010200EG 2" 2.375" 3/8" 4 5/16" 2 1/2" 7/8" 600 lb cULus, FM
4010250EG 2 1/2" 2.875" 1/2" 5 5/16" 3 1/16" 1" 1,130 lb cULus, FM
4010300EG 3" 3.500" 1/2" 6 1/16" 3 1/2" 1 1/8" 1,130 lb cULus, FM
4010350EG 3 1/2" 4.000" 1/2" 6 13/16" 4" 1 5/16" 1,130 lb cULus, FM
4010400EG 4" 4.500" 5/8" 7 7/16" 4 3/8" 1 3/8" 1,130 lb cULus, FM
4010500EG 5" 5.563" 5/8" 9 1/16" 5 1/8" 1 5/8" 1,430 lb cULus, FM
4010600EG 6" 6.625" 3/4" 10 9/16" 6" 1 7/8" 1,940 lb cULus, FM
4010800EG 8" 8.625" 3/4" 14" 8" 3 1/8" 2,000 lb cULus, FM
4011000EG 10" 10.750" 7/8" 16 1/2" 9" 2 9/16" 3,600 lb
4011200EG 12" 12.750" 7/8" 18 5/8" 10 3/16" 3 1/16" 3,800 lb
4011400EG 14" 14.000" 1" 21 3/4" 12 1/8" 4 3/8" 4,200 lb
4011600EG 16" 16.000" 1" 24" 13 1/2" 4 5/8" 4,600 lb
4011800EG 18" 18.000" 1 1/8" 26 3/4" 15" 5 1/8" 4,800 lb
4012000EG 20" 20.000" 1 1/4" 30" 17" 6" 4,800 lb
4012400EG 24" 24.000" 1 1/4" 34 1/8" 18 5/8" 5 11/16" 4,800 lb
Finish: Hot-Dip Galvanized
Part Number Pipe Size Outer DiameterOD Rod SizeRS A B C Static LoadF Certifications
4010050HD 1/2" 0.840" 3/8" 2 1/8" 15/16" 1/4" 600 lb cULus
4010075HD 3/4" 1.050" 3/8" 2 3/8" 1 1/16" 3/8" 600 lb cULus, FM
4010100HD 1" 1.315" 3/8" 2 13/16" 1 3/8" 9/16" 600 lb cULus, FM
4010125HD 1 1/4" 1.660" 3/8" 3 5/16" 1 3/4" 11/16" 600 lb cULus, FM
4010150HD 1 1/2" 1.900" 3/8" 4" 2 1/4" 1 1/16" 600 lb cULus, FM
4010200HD 2" 2.375" 3/8" 4 1/2" 2 9/16" 1 1/8" 600 lb cULus, FM
4010250HD 2 1/2" 2.875" 1/2" 5 1/4" 2 13/16" 1 1/16" 1,130 lb cULus, FM
4010300HD 3" 3.500" 1/2" 6" 3 1/4" 7/8" 1,130 lb cULus, FM
4010400HD 4" 4.500" 5/8" 7 3/4" 4 1/4" 1 3/4" 1,130 lb cULus, FM
4010500HD 5" 5.563" 5/8" 9 3/4" 5 11/16" 2 3/16" 1,430 lb cULus, FM
4010600HD 6" 6.625" 3/4" 11 3/4" 6 7/8" 2 11/16" 1,940 lb cULus, FM
4010800HD 8" 8.625" 3/4" 14" 8 1/8" 3 1/8" 2,000 lb cULus, FM
4011000HD 10" 10.750" 7/8" 16 1/2" 9 1/16" 2 9/16" 3,600 lb
4011200HD 12" 12.750" 7/8" 18 5/8" 10 3/16" 3 1/16" 3,800 lb
A shield is recommended for insulated pipe applications to effectively distribute the load.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.

FM is a registered certification mark of FM Approvals LLC, LTD.
UL, UR, cUL, cUR, cULus and cURus are registered certification marks of UL LLC.

Applications

3D Models