United StatesChange
CADDY

CADDY SPEED LINK SLK with Shot-Fire Bracket

Features

  • Complete system includes wire, locking device and shot-fire bracket with pre-assembled drive pin from Powers Fasteners, Inc.
  • Quickly and easily attaches to concrete, steel or composite metal decking
  • Integrated pin installs easily using powder-actuated or single-shot gas-actuated tools
  • ICC-ES ESR-2024 evaluation report available for drive pin from Powers Fasteners, Inc

Specifications

Material: Steel; Zinc Alloy; Polypropylene
Finish: Electrogalvanized
Static Load Safety Factor: 5:1
Wire Rope Diameter: 1.5 mm
Part Number Wire Rope Length A B C Static LoadF
SLK15L1SF 3.3' 1.48" 0.3" 1 1/4" 44 lb
SLK15L2SF 6.6' 1.48" 0.3" 1 1/4" 44 lb
SLK15L3SF 9.9' 1.48" 0.3" 1 1/4" 44 lb
SLK15L5SF 16.4' 1.48" 0.3" 1 1/4" 44 lb
Wire Rope Diameter: 2.0 mm
Part Number Wire Rope Length A B C Static LoadF
SLK2L2SF 6.6' 1.48" 0.3" 1 1/4" 100 lb
SLK2L3SF 9.9' 1.48" 0.3" 1 1/4" 100 lb
SLK2L5SF 16.4' 1.48" 0.3" 1 1/4" 100 lb
HeightH WidthW ThicknessT Anglea
2.15" 3/4" 1/2" 90° Max
Uses Powers Fasteners, Inc. part number 50032.
Static load was established based on a 1” (25.4 mm) embedment depth and 3,000 psi (20.68 Mpa) lightweight concrete. For variations in embedment and material please consult www.powers.com. ​
Pre-assembled drive pin from Powers Fasteners, Inc. works with Powers® C4CZ, Simpson® GCN-MEPKT, SPIT® P1000, P200, P2201, P3500 / PA3500, P35s, P45, P60, P7201, Sniper; Ramset® 721, Cobra, D45 / D60 / D60L, M70, SA270, T3SS, TS750P, TS60P, Viper; Hilti® DX35, DX350 / DX351 / DX36M, DX100 / DX200, DX460, DXA40, DXA41,​ DXE72 / DX400; Würth Diva-1, BST-1, BST-2 or equivalent nailers.
For shot-fired supports in seismic design category D, E, or F, maximum load is the lesser of 90 lb (400 N) or the published load.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.

HILTI is a registered trademark of Hilti Aktiengesellschaft.
Ramset is a registered trademark of Illinois Tool Works, Inc.
Simpson is a registered trademark of Simpson Strong-Tie Company Inc.
SPIT is a registered trademark of Societe De Prospection & D’Inventions Techniques Spit.
UL, UR, cUL, cUR, cULus and cURus are registered certification marks of UL LLC.

Applications

Video