United StatesChange
nVent CADDY

nVent CADDY Speed Link SLK with Decking Hook

Features

  • Complete system includes wire, locking device and pre-assembled decking hook end fitting
  • Quickly and easily attaches to hollow metal decking
  • Spring-loaded ends snap into decking hole and lock into place
  • Innovative design helps protect the wire from sharp edges of decking hole, minimizing risk of damage to wire

Specifications

Material: Steel; Zinc Alloy; Polypropylene
Finish: Electrogalvanized
Static Load Safety Factor: 5:1
Complies With: SMACNA HVAC-DCS
Wire Rope Diameter: 1.5 mm
Part Number Wire Rope Length Roof Decking Sheet Thickness A Hole SizeHS Static LoadF
SLK15L1DH 3.3' 16 GA Max 0.36" 0.315" 44 lb
SLK15L2DH 6.6' 16 GA Max 0.36" 0.315" 44 lb
SLK15L3DH 9.9' 16 GA Max 0.36" 0.315" 44 lb
SLK15L5DH 16.4' 16 GA Max 0.36" 0.315" 44 lb
Wire Rope Diameter: 2.0 mm
Part Number Wire Rope Length Roof Decking Sheet Thickness A Hole SizeHS Static LoadF
SLK2L3DH 9.9' 16 GA Max 0.36" 0.315" 100 lb
SLK2L5DH 16.4' 16 GA Max 0.36" 0.315" 100 lb
SLK2L7DH 22.9' 16 GA Max 0.36" 0.315" 100 lb
HeightH WidthW ThicknessT Anglea
2.15" 3/4" 1/2" 90° Max
Load rating is only applicable if the load-bearing capacity of the supporting element (steel decking) is adequate.
Check with deck manufacturer for recommended load capacity.

nVent, nVent CADDY, nVent ERICO, nVent ERIFLEX, and nVent LENTON are owned by nVent or its global affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without prior notice.

UL, UR, cUL, cUR, cULus and cURus are registered certification marks of UL LLC.

Applications

Video

3D Models