United StatesChange
CADDY

CADDY CAT HP J-Hook Tree, Ceiling Mount

Features

  • Ideal for attaching to concrete, steel or wood surfaces
  • Provides optimal support for high-performance data cable, up to and including Cat 5e, Cat 6, Cat 6A, Cat 7 and fibre optic
  • Ready to use out of the box, saving installation time and labor
  • Requires no screws, rivets or special tools for assembly
  • Single- or double-sided tree configurations provide multiple J-Hooks with one structural attachment
  • Provides superior fill capacity and load rating over most other non-continuous cable support alternatives
  • Complies with EN 50174-2
  • Meets ISO®/IEC 14763-2, ANSI®/TIA 568 and ANSI®/TIA 569

Specifications

Material: Steel
Finish: Pregalvanized
Type: Double Sided
Part Number Ø(") Tiers H(") W(") HS1(") HS2(") A(") B(") F1(lb) F2(lb)
CAT32HPDCM2 2 2 10 1/4 5 13/16 0.405 0.185 1 7/16 2 240 180
CAT32HPDCM3 2 3 15 1/4 5 13/16 0.405 0.185 1 7/16 2 360 180
CAT32HPDCM4 2 4 20 1/4 5 13/16 0.405 0.185 1 7/16 2 480 180
CAT64HPDCM2 4 2 15 1/4 10 0.405 0.185 1 7/16 2 240 180
CAT64HPDCM3 4 3 22 3/4 10 0.405 0.185 1 7/16 2 360 180
CAT64HPDCM4 4 4 30 1/4 10 0.405 0.185 1 7/16 2 480 180
Type: Single Sided
Part Number Ø(") Tiers H(") W(") HS1(") HS2(") A(") B(") F1(lb) F2(lb)
CAT32HPSCM2 2 2 10 1/4 3 5/16 0.405 0.185 1 7/16 2 120 120
CAT32HPSCM3 2 3 15 1/4 3 5/16 0.405 0.185 1 7/16 2 180 180
CAT32HPSCM4 2 4 20 1/4 3 5/16 0.405 0.185 1 7/16 2 240 180
CAT64HPSCM2 4 2 15 1/4 5 7/16 0.405 0.185 1 7/16 2 120 120
CAT64HPSCM3 4 3 22 3/4 5 7/16 0.405 0.185 1 7/16 2 180 180
CAT64HPSCM4 4 4 30 1/4 5 7/16 0.405 0.185 1 7/16 2 240 180
Static loads represent maximum load limit of J-Hook tree. Static load limit of each J-Hook is 60 lb (270 N).
Refer to Static Load 1 when fastening J-Hook tree using Hole Size 1. Refer to Static Load 2 when fastening J-Hook tree using Hole Size 2.
Non-continuous supports may not exceed spacing of 5' (1.5 m) per TIA 569-C.9.7 and EN 50174-2.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.

ANSI is a registered trademark of American National Standards Institute.
ISO is a registered trademark of International Organization for Standardization.

Applications

Video