United StatesChange
ERICO

Load Cell Protector

Features

  • Six wires and shield protection works with four or six wire systems
  • Suitable for compression or tension cells
  • Low series impedance, loadcells do not need recalibration
  • NEMA®-12 (IP-55) rated, suitable for outdoor use
  • Helps protect against excitation over-voltage and prevent loadcell damage

Specifications

Part Number LCP01A
Max Discharge Current (Imax), Shield to Ground 10 kA 8/20 μs
Max Discharge Current (Imax), Signal to Shield 0.3 kA 8/20 μs
Voltage Protection Level (Up), Shield to Ground 90 V
Voltage Protection Level (Up), Signal to Shield 30 V
Voltage Protection Level (Up), Signal to Signal 15 V
Loop Resistance 0.3 Ω
Technology Silicon Avalanche Diode (SAD)
Material Acrylonitrile Butadiene Styrene
Enclosure Rating NEMA® 12 (IP55)
Depth (D) 4.33"
Height (H) 2.2"
Width (W) 2.95"
Unit Weight 0.55 lb
Temperature -40 to 176 °F

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.

NEMA is a registered service mark of National Electrical Manufacturers Association.

Brochures

Catalogs

Datasheets

ERITECH LCP
113 KB English

Technical

Warranties