United StatesChange
ERICO

Transient Discriminating Surge Diverter, 50 kA Single Mode

Features

  • TD Technology with thermal disconnect protection
  • Compact design fits into DIN distribution panel boards and motor control centers
  • Indication flags and voltage-free contacts provide remote status monitoring
  • Separate plug and base design facilitates replacement of a failed surge module
  • 50kA 8/20μs maximum surge rating provides protection suitable for sub-distribution panels and a long operational life

Specifications

Part Number TDS1501SR150 TDS1501SR240 TDS1501SR277 TDS1501SR560
Nominal System Voltage (Un) 120 - 150 VAC 220 - 240 VAC 240 - 277 VAC 480 - 560 VAC
Max Continuous Operating Voltage (Uc) 170 VAC 275 VAC 320 VAC 610 VAC
Stand-off Voltage 240 VAC 350 VAC 480 VAC 700 VAC
Voltage Protection Rating (VPR) 600.0 V @ 3 kA
1,000.0 V @ 25 kA
900.0 V @ 3 kA
1,200.0 V @ 20 kA
1,000.0 V @ 3 kA
1,600.0 V @ 20 kA
1,800.0 V @ 3 kA
2,400.0 V @ 20 kA
Nominal Discharge Current (In) 20 kA 8/20 μs
Max Discharge Current (Imax) 50 kA 8/20 μs
Back-Up Overcurrent Protection 125 A
Short Circuit Current Rating (SCCR) 200 kA
Frequency 0 – 100 Hz
Protection Modes L-N
L-PE
N-PE
Response Time 5 ns Max
Technology TD technology with thermal disconnect
Connection, Solid #2 Max
Connection, Stranded #4 Max
Mounting 35 mm top hat DIN rail
Enclosure Material UL® 94V-0 thermoplastic
Enclosure Rating IP 20
NEMA®-1
Remote Contacts Yes
Status Indication Mechanical flag
Temperature -40 to 176 °F
Module Width 1 M
Depth (D) 2.68"
Height (H) 3.54"
Width (W) 0.71"
Unit Weight 0.26 lb
Certification Details UL® 1449 Edition 4 Type 4CA, 20 kA Mode
Complies With ANSI®/IEEE® C62.41.2-2002 Cat A, Cat B, Cat C
IEC® 61643-1 Class II
ANSI®/IEEE® C62.41.2-2002 Scenario II, Exposure 2, 50 kA 8/20 μs, 5 kA 10/350 μs
Replacement Module TDS150M150 TDS150M240 TDS150M277 TDS150M560

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.

ANSI is a registered trademark of American National Standards Institute.
IEC is a registered trademark of the International Electrotechnical Commission.
IEEE is a registered trademark of The Institute of Electrical and Electronics Engineers, Inc.
NEMA is a registered service mark of National Electrical Manufacturers Association.
UL, UR, cUL, cUR, cULus and cURus are registered certification marks of UL LLC.

Brochures

ERITECH TDS
0.99 MB English

Catalogs

Certifications

cUR VZCA8.E325047
CSA C22.2 No. 8, CSA Electrical Notice No. 516
UR VZCA2.E325047
ANSI/UL 1449

Instruction Sheets

Technical

Warranties