United StatesChange
nVent CADDY

nVent CADDY Cat HP J-Hook with Hammer-On Flange Clip

Features

  • Requires only a hammer to install
  • Provides optimal support for high-performance data cable, up to and including Cat 5e, Cat 6, Cat 6A, Cat 7 and fibre optic
  • Provides superior fill capacity and load rating over most other non-continuous cable support alternatives
  • Rounded edges on J-Hooks provide proper bend radius support for high performance data cables
  • Cost effective alternative to expensive cable tray
  • Complies with EN 50174-2
  • Meets ISO®/IEC 14763-2, ANSI®/TIA 568 and ANSI®/TIA 569

Specifications

Material: Steel; Spring Steel
Finish: Pregalvanized; nVent CADDY Armour
Part Number DiameterØ Area Cable Capacity, Cat 5e Cable Capacity, Cat 6 Cable Capacity, Cat 6A Flange ThicknessFT Static LoadF Certifications
CAT16HP24SM 1" 1.07 in² 20 15 10 1/8" – 1/4" 60 lb cULus, E30, E60, E90
CAT16HP58SM 1" 1.07 in² 20 15 10 5/16" – 1/2" 60 lb cULus, E30, E60, E90
CAT16HP912SM 1" 1.07 in² 20 15 10 1/2" – 3/4" 60 lb cULus, E30, E60, E90
CAT21HP24SM 1 5/16" 2.29 in² 50 40 25 1/8" – 1/4" 60 lb cULus
CAT21HP58SM 1 5/16" 2.29 in² 50 40 25 5/16" – 1/2" 60 lb cULus
CAT21HP912SM 1 5/16" 2.29 in² 50 40 25 1/2" – 3/4" 60 lb cULus
CAT32HP24SM 2" 3.97 in² 90 60 35 1/8" – 1/4" 60 lb cULus, E30, E60, E90
CAT32HP58SM 2" 3.97 in² 90 60 35 5/16" – 1/2" 60 lb cULus, E30, E60, E90
CAT32HP912SM 2" 3.97 in² 90 60 35 1/2" – 3/4" 60 lb cULus, E30, E60, E90
CAT48HP24SM 3" 9.26 in² 200 150 80 1/8" – 1/4" 60 lb cULus, E30, E60, E90
CAT48HP58SM 3" 9.26 in² 200 150 80 5/16" – 1/2" 60 lb cULus, E30, E60, E90
CAT48HP912SM 3" 9.26 in² 200 150 80 1/2" – 3/4" 60 lb cULus, E30, E60, E90
CAT64HP24SM 4" 15.48 in² 330 220 140 1/8" – 1/4" 60 lb cULus, E30, E60, E90
CAT64HP58SM 4" 15.48 in² 330 220 140 5/16" – 1/2" 60 lb cULus, E30, E60, E90
CAT64HP912SM 4" 15.48 in² 330 220 140 1/2" – 3/4" 60 lb cULus, E30, E60, E90
Non-continuous supports may not exceed spacing of 5' (1.5 m) per TIA 569-C.9.7 and EN 50174-2.
Cable capacity is calculated based on a 70% fill rate.

nVent, nVent CADDY, nVent ERICO, nVent ERIFLEX, and nVent LENTON are owned by nVent or its global affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without prior notice.

ANSI is a registered trademark of American National Standards Institute.
ISO is a registered trademark of International Organization for Standardization.
UL, UR, cUL, cUR, cULus and cURus are registered certification marks of UL LLC.

Applications

Video

3D Models