T-Series Horizontal Sleeve, Top Fill

Details
Applications
Video
Documents
3D ModelsNew

The top fill horizontal T-Series sleeve has vent holes to reduce air entrapment and help ensure proper filling of the sleeve.

Features

Designed to connect horizontal reinforcing bars and angular reinforcing bars up to 45 degrees
Used to splice the same diameter bars
Works with saw cut, flame cut and sheared bars
Can be visually inspected after installation
Available with extended sleeve lengths

Specifications

Material: Steel

Finish: Plain

100% U.S. Domestic Content: Yes

Sleeve: Standard Length

Part Number	Rebar Size, Metric	Rebar Size, US	Rebar Size, Canada	Diameter 1Ø1	Diameter 2Ø2	Length 1L1	Length 2L2	Length 3L3	Unit Weight
RBT6101HA	20 mm	#6	20M	1.50"	1.00"	5.0"	2.50"	0.78"	1.40 lb
RBT7101HA	22 mm	#7	–	1.63"	1.13"	5.0"	2.50"	0.78"	1.50 lb
RBT8101HA	25 mm	#8	25M	1.88"	1.25"	5.0"	2.50"	0.78"	2.22 lb
RBT9101HA	28 mm	#9	30M	2.13"	1.50"	5.0"	2.50"	0.78"	2.50 lb
RBT1091HA	32 mm	#10	–	2.25"	1.63"	5.5"	2.75"	0.78"	3.00 lb
RBT11101HA	36 mm	#11	35M	2.50"	1.75"	6.0"	3.00"	0.78"	4.30 lb
RBT12917HA	38 mm	#12	–	2.75"	1.88"	7.0"	3.50"	1.03"	6.30 lb
RBT14101HA	43 mm	#14	45M	3.00"	2.13"	7.0"	3.50"	1.03"	7.00 lb
RBT1891HA	57 mm	#18	55M	3.75"	2.63"	9.0"	4.50"	1.03"	14.40 lb

Sleeve: Extended Length

Part Number	Rebar Size, Metric	Rebar Size, US	Rebar Size, Canada	Diameter 1Ø1	Diameter 2Ø2	Length 1L1	Length 2L2	Length 3L3	Unit Weight
RBT51012HA	16 mm	#5	15M	1.38"	0.88"	6.0"	3.00"	–	1.50 lb
RBT61012HA	20 mm	#6	20M	1.50"	1.00"	7.0"	3.50"	0.78"	2.00 lb
RBT71011HA	22 mm	#7	–	1.63"	1.13"	6.0"	3.00"	1.03"	1.80 lb
RBT81011HA	25 mm	#8	25M	1.88"	1.25"	6.0"	3.00"	0.78"	3.00 lb
RBT81012HA	25 mm	#8	25M	1.88"	1.25"	8.0"	3.50"	0.78"	3.00 lb
RBT91011HA	28 mm	#9	30M	2.13"	1.50"	6.0"	3.00"	1.03"	3.00 lb
RBT91012HA	28 mm	#9	30M	2.13"	1.50"	7.0"	3.50"	0.78"	3.50 lb
RBT10911HA	32 mm	#10	–	2.25"	1.63"	6.5"	3.25"	1.03"	3.50 lb
RBT111011HA	36 mm	#11	35M	2.50"	1.75"	7.0"	3.50"	1.03"	5.00 lb
RBT111012HA	36 mm	#11	35M	2.50"	1.75"	8.0"	4.00"	1.03"	5.70 lb
RBT121018HA	38 mm	#12	–	2.75"	1.88"	8.0"	4.00"	1.03"	7.20 lb
RBT141011HA	43 mm	#14	45M	3.00"	2.13"	8.0"	4.00"	1.03"	8.00 lb

Designed to Meet

AASHTO, ABNT NBR 8548:1984, ACI 318 Type 1 (125% Specified Yield), ACI 318 Type 2 (Specified Ultimate), ACI 349, ACI 359, AS3600, CAN/CSA - N287.2/.3/.4, IBC Type 1 (125% Specified Yield), IBC Type 2 (Specified Ultimate), US Army Corps of Engineers

Prior to installation, please read and understand all of the detailed instructions and safety notices provided in the nVent LENTON Cadweld Rebar Splicing System Instruction Manual.

Sizes not shown may be available by special order. Contact your nVent LENTON representative for more information.

RBT51012HA does not have vent holes.

nVent, nVent CADDY, nVent ERICO, nVent ERIFLEX, and nVent LENTON are owned by nVent or its global affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without prior notice.

Warning

WARNING
nVent products shall be installed and used only as indicated in nVent's product instruction sheets and training materials. Instruction sheets are available at www.erico.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent 's instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.