United StatesChange
LENTON

T-Series Horizontal Low Slip Sleeve, Top Fill

The top fill, low slip horizontal T-Series sleeve length is increased to reduce slip (for extreme code requirements) and when the rib pattern or spacing does not meet the minimum product specifications.

Vent holes are added to horizontal sleeves to reduce air entrapment and help ensure proper filling of the sleeve.

Features

  • Designed to connect horizontal reinforcing bars and angular reinforcing bars up to 45 degrees
  • Used to splice the same diameter bars
  • Additional length improves performance
  • Works with saw cut, flame cut and sheared bars
  • Can be visually inspected after installation

Specifications

Material: Steel
Finish: Plain
100% U.S. Domestic Content: Yes
Part Number Rebar Size, Metric Rebar Size, US Rebar Size, Canada Diameter 1Ø1 Diameter 2Ø2 Length 1L1 Length 2L2 Length 3L3 Unit Weight
RBW6555HA 16 mm #5 15M 1.38" 0.88" 6.0" 3.00" 0.78" 1.5 lb
RBW6556HA 20 mm #6 20M 1.50" 1.00" 7.0" 3.50" 0.78" 1.9 lb
RBW6557HA 22 mm #7 1.62" 1.13" 7.0" 3.50" 0.78" 2.1 lb
RBW6558HA 25 mm #8 25M 1.88" 1.25" 7.0" 3.50" 0.78" 3.0 lb
RBW6559HA 28 mm #9 30M 2.13" 1.50" 7.0" 3.50" 0.78" 3.5 lb
RBW65510HA 32 mm #10 2.25" 1.63" 7.5" 3.75" 1.03" 4.0 lb
RBW65511HA 36 mm #11 35M 2.50" 1.75" 8.0" 4.00" 1.03" 5.6 lb
RBW65514HA 43 mm #14 45M 3.00" 2.13" 9.0" 4.50" 1.03" 8.9 lb
RBW65518HA 57 mm #18 55M 3.75" 2.63" 11.0" 5.50" 1.03" 17.5 lb
Designed to Meet
AASHTO, ABNT NBR 8548:1984, ACI 318 Type 1 (125% Specified Yield), ACI 318 Type 2 (Specified Ultimate), ACI 349, ACI 359, AS3600, CAN/CSA - N287.2/.3/.4, IBC Type 1 (125% Specified Yield), IBC Type 2 (Specified Ultimate), US Army Corps of Engineers
Prior to installation, please read and understand all of the detailed instructions and safety notices provided in the LENTON CADWELD Rebar Splicing System Instruction Manual.
Sizes not shown may be available by special order. Contact your LENTON representative for more information.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.

Video