United StatesChange
LENTON

T-Series Vertical Sleeve

Features

  • Designed to connect vertical reinforcing bars and angular reinforcing bars greater than 45 degrees
  • Used to splice the same diameter bars
  • Works with saw cut, flame cut and sheared bars
  • Can be visually inspected after installation
  • Available with extended sleeve lengths

Specifications

Material: Steel
Finish: Plain
100% U.S. Domestic Content: Yes
Sleeve: Standard Length
Part Number Rebar Size, Metric Rebar Size, US Rebar Size, Canada Diameter 1Ø1 Diameter 2Ø2 Length 1L1 Length 2L2 Unit Weight
RBT5101A 16 mm #5 15M 1.38" 0.88" 4.0" 2.00" 1.00 lb
RBT6101A 20 mm #6 20M 1.50" 1.00" 5.0" 2.50" 1.40 lb
RBT7101A 22 mm #7 1.63" 1.13" 5.0" 2.50" 1.50 lb
RBT8101A 25 mm #8 25M 1.88" 1.25" 5.0" 2.50" 2.22 lb
RBT9101A 28 mm #9 30M 2.13" 1.50" 5.0" 2.50" 2.50 lb
RBT1091A 32 mm #10 2.25" 1.63" 5.5" 2.75" 3.00 lb
RBT11101A 36 mm #11 35M 2.50" 1.75" 6.0" 3.00" 4.30 lb
RBT12917A 38 mm #12 2.75" 1.88" 7.0" 3.50" 6.30 lb
RBW4117A 40 mm 2.88" 2.00" 7.0" 3.50" 6.60 lb
RBT14101A 43 mm #14 45M 3.00" 2.13" 7.0" 3.50" 7.00 lb
RBW4558A 50 mm 3.38" 2.38" 8.0" 4.00" 10.20 lb
RBT1891A 57 mm #18 55M 3.75" 2.63" 9.0" 4.50" 14.40 lb
Sleeve: Extended Length
Part Number Rebar Size, Metric Rebar Size, US Rebar Size, Canada Diameter 1Ø1 Diameter 2Ø2 Length 1L1 Length 2L2 Unit Weight
RBT51012A 16 mm #5 15M 1.38" 0.88" 6.0" 3.00" 1.50 lb
RBT61011A 20 mm #6 20M 1.50" 1.00" 6.0" 3.00" 1.70 lb
RBT61012A 20 mm #6 20M 1.50" 1.00" 7.0" 3.50" 2.00 lb
RBT81011A 25 mm #8 25M 1.88" 1.25" 6.0" 3.00" 3.00 lb
RBT91011A 28 mm #9 30M 2.13" 1.50" 6.0" 3.00" 3.00 lb
RBT91012A 28 mm #9 30M 2.13" 1.50" 7.0" 3.50" 3.50 lb
RBT10911A 32 mm #10 2.25" 1.63" 6.5" 3.25" 3.50 lb
RBT111011A 36 mm #11 35M 2.50" 1.75" 7.0" 3.50" 5.00 lb
RBT111012A 36 mm #11 35M 2.50" 1.75" 8.0" 4.00" 5.70 lb
RBT121018A 38 mm #12 2.75" 1.88" 8.0" 4.00" 7.20 lb
RBT141011A 43 mm #14 45M 3.00" 2.13" 8.0" 4.00" 8.00 lb
RBT141012A 43 mm #14 45M 3.00" 2.13" 9.0" 4.50" 9.00 lb
RBW45510A 50 mm 2.38" 2.38" 10.0" 5.00" 12.80 lb
RBT18911A 57 mm #18 55M 3.75" 2.63" 10.0" 5.00" 16.00 lb
Designed to Meet
AASHTO, ABNT NBR 8548:1984, ACI 318 Type 1 (125% Specified Yield), ACI 318 Type 2 (Specified Ultimate), ACI 349, ACI 359, AS3600, CAN/CSA - N287.2/.3/.4, IBC Type 1 (125% Specified Yield), IBC Type 2 (Specified Ultimate), US Army Corps of Engineers
Prior to installation, please read and understand all of the detailed instructions and safety notices provided in the LENTON CADWELD Rebar Splicing System Instruction Manual.
Sizes not shown may be available by special order. Contact your LENTON representative for more information.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.

Video

3D Models