United StatesChange
LENTON

LENTON FORM SAVER Anchor

The LENTON FORM SAVER Anchor mechanical reinforcing bar splicing system provides a method of splicing reinforcing bar in segmental concrete construction applications that have limited space or are severely congested. The coupler is friction forged to the headed anchor/shear stud.

Typically used in wall applications, the LENTON FORM SAVER Anchor easily attaches to the front wall form panel and fits into the wall reinforcement mat more easily than a hooked reinforcing bar. When the form is stripped, the protected threaded end of the coupler is exposed on the wall face. Simply remove the protective cap, install the LENTON taper threaded dowel bar. This system eliminates hooked bar congestion, protruding dowels and the need to drill holes in expensive formwork.

Features

  • The headed anchor/shear stud is C-1010/C-1020 AWSD1.1 and ASTM®-A108 compliant
  • Durable mounting plates allow for easy attachment to forms
  • Built-in thread cover or screw-in plug protects internal threads from concrete paste contamination

Specifications

Material: Steel
Finish: Plain
Part Number Rebar Size, Metric Rebar Size, US Rebar Size, Canada Hex WidthW Diameter 1Ø1 Diameter 2Ø2 HeightH LengthL Bar DepthBD Coupler BodyCB Unit Weight
EP4X6 12 mm #4 10M 0.88" 0.63" 1.25" 2.25" 5.75" 0.82" 1.69" 0.8 lb
EP4X7 12 mm #4 10M 0.88" 0.63" 1.25" 2.25" 6.75" 0.82" 1.69" 0.9 lb
EP4X8 12 mm #4 10M 0.88" 0.63" 1.25" 2.25" 8.13" 0.82" 1.69" 1.0 lb
EP5X6 16 mm #5 15M 0.88" 0.75" 1.25" 2.25" 6.13" 1.13" 1.94" 1.0 lb
EP5X7 16 mm #5 15M 0.88" 0.75" 1.25" 2.25" 7.13" 1.13" 1.94" 1.1 lb
Designed to Meet
AASHTO, ACI 318 Type 1 (125% Specified Yield), CAN/CSA - N287.2/.3/.4, IBC Type 1 (125% Specified Yield), US Army Corps of Engineers
Bar dimensions and weights listed may vary by region. Coupler sizes not shown may be available by special order. Contact your LENTON representative for more information.
Minimum embedment length required to develop 125% of minimum specified yield on ASTM® A-615 Grade 60 reinforcing steel in 3000–5000 psi (20-30 MPa) concrete (based on ASME/ACI codes).

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.

ASTM is a registered trademark of American Society for Testing and Materials.

Video

Datasheets

Instruction Sheets