AASHTO,ABNT NBR 8548:1984,ACI 318 Type 1 (125% Specified Yield),ACI 318 Type 2 (Specified Ultimate),ACI 349,ACI 359,AS3600,BS EN 1992-1-1,BS EN 1992-2,CAN/CSA - N287.2/.3/.4,DIN EN 1992-1-1,Eurocode 2,IBC Type 1 (125% Specified Yield),IBC Type 2 (Specified Ultimate),ISO 15835,NEN EN 1992-1-1,NF A 35-020-1,NF EN 1992-1-1,ÖNORM EN 1992-1-1,Sellafield Ltd. Std. ES_0_3110,US Army Corps of Engineers
Bolt length may vary after the bolt heads are sheared off. Bolt heads are not required to be removed as long as the appropriate bolt torque is achieved.
When using an impact wrench, size the wrench for 2x the bolt torque. If using an air impact wrench, check the air pressure, torque rating and air flow requirements before starting installations.
Refer to complete installation instructions provided with the product or available at erico.pentair.com prior to commencing installation.
Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.
Pentair products shall be installed and used only as indicated in Pentair's product instruction sheets and training materials. Instruction sheets are available at www.erico.pentair.com and from your Pentair customer service representative. Improper installation, misuse, misapplication or other failure to completely follow Pentair's instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.