United StatesChange
LENTON

T-Series Horizontal Fixed Angle Splice Kit, Top Fill, 15-30°

T-Series splice kits contain the following: Sleeve, filler material kit (filler material, packing, pouring basin ceramic insert and disk, pouring basin ceramic guide tube), pouring basin and pouring basin crucible. Splice kits are ordered based on the quantity of splices needed. Sleeves and filler material kits are one-time use parts. Pouring basins and crucibles are prorated based on their anticipated life. Ordering splice kits simplifies ordering, reduces order errors and helps ensure proper sizing of components. Kits can be ordered with longer (extended) sleeves for use when the reinforcing steel deformation pattern or spacing does not meet the minimum product specifications.

Features

  • Simplifies ordering
  • Used to splice the same diameter bars

Specifications

Sleeve: Standard Length
Part Number Anglea Rebar Size, Metric Rebar Size, US Rebar Size, Canada Length 1L1 Length 2L2 Height 1H1 Height 2H2 DiameterØ
RBT1110115H 15° 36 mm #11 35M 6.58" 11.86" 19.92" 5.42" 5"
RBT189115H 15° 57 mm #18 55M 8.19" 11.86" 21.17" 5.92" 7"
RBT109130H 30° 32 mm #10 6.49" 11.23" 19.53" 6.88" 5"
RBT1110130H 30° 36 mm #11 35M 6.77" 11.23" 19.53" 7.87" 5"
RBT189130H 30° 57 mm #18 55M 8.37" 11.23" 20.78" 8.14" 7"
Splice Kit Components
Splice Kit Filler 
Material
Packing
(2 Required)
Pouring Basin 
Ceramic Insert 
and Disk
Pouring Basin 
Ceramic 
Guide Tube
Sleeve Pouring
Basin
Pouring
Basin
Crucible
RBT109130H RBF90 RBS354712 RBS5037 RBS5038 RBT1091HA RBWS2223E RBWS22775
RBT1110115H RBF105 RBS354712 RBS5037 RBS5038 RBT11101HA RBWS2222F RBWS22775
RBT1110130H RBF105 RBS354712 RBS5037 RBS5038 RBT11101HA RBWS2223F RBWS22775
RBT189115H RBF270 RBS354720 RBS5037 RBS5039 RBT1891HA RBWS2222M RBWS22777
RBT189130H RBF270 RBS354720
RBS354720
RBS5037 RBS5039 RBT1891HA RBWS2223M RBWS22777
Prior to installation, please read and understand all of the detailed instructions and safety notices provided in the LENTON CADWELD Rebar Splicing System instruction manual.
All dimensions are for reference only.
Components can also be purchased separately: (1) Sleeve, (2) Filler Material Kit (filler material, packing, pouring basin ceramic insert and disk, pouring basin ceramic guide tube), (3) Pouring Basin, and (4) Pouring Basin Crucible.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.