United StatesChange
ERIFLEX

ERIFLEX FLEXIBAR SUMMUM, Halogen Free

Features

  • Halogen free solution for applications requiring a low smoke solution
  • Thin layers of bare electrolytic copper formed into a stack
  • Silver or tinned ERIFLEX FLEXIBAR SUMMUM available on request
  • Insulated by halogen-free, high-temperature silicone
  • Easily bent, folded, and twisted, improving assembly flexibility, shortening connections, and decreasing footprint
  • Dramatically smaller and more flexible than comparable cable based on ampacity
  • Better power density than cable with lower skin effect ratio
  • Connections made by punching and bolting directly through the copper laminates, clamping onto the end of the ERIFLEX FLEXIBAR, or welding using ERICO CADWELD
  • No lugs needed, reducing installation time and improving resistance to vibration
  • Weight savings and material savings compared to wire alternatives
  • Reduces total installation cost
  • Very high resistance to UV and ozone
  • Limiting oxygen index (LOI)
  • Traceability codes and designation part numbers printed on insulation
  • EAC compliant
  • RoHS compliant

Specifications

Material: Copper; Silicone
Dielectric Strength: 20 kV/mm
Flammability Rating: UL® 94V-0
Insulation Elongation: 400 %
Insulation Thickness: 0.08"
Nominal Voltage, IEC: 1,000 VAC; 1,500 VDC
Working Temperature: -58 to 536 °F
Complies With: IEC® 60439.1; IEC® 61439.1
Part Number Article Number L(') ∆T 40 K(A) ∆T 50 K(A) ∆T 60 K(A) N A(") B(") Cross Section(kcmil) 2 Bar Current Coefficient 3 Bar Current Coefficient
FLEXSM2MRC2X20 566490 6.56 246 275 300 2 0.787 0.039 78.94 1.72 2.25
FLEXSM2MRC3X20 566500 6.56 323 360 395 3 0.787 0.039 118.41 1.72 2.25
FLEXSM2MRC2X24 566550 6.56 340 380 416 2 0.945 0.039 94.73 1.72 2.25
FLEXSM2MRC4X20 566510 6.56 360 402 440 4 0.787 0.039 157.88 1.72 2.25
FLEXSM2MRC3X24 566560 6.56 370 413 453 3 0.945 0.039 142.10 1.72 2.25
FLEXSM2MRC5X20 566520 6.56 376 420 460 5 0.787 0.039 197.35 1.72 2.25
FLEXSM2MRC4X24 566570 6.56 416 465 540 4 0.945 0.039 189.46 1.72 2.25
FLEXSM2MRC3X32 566630 6.56 430 480 525 3 1.260 0.039 189.46 1.72 2.25
FLEXSM2MRC5X24 566580 6.56 460 514 563 5 0.945 0.039 236.80 1.72 2.25
FLEXSM2MRC4X32 566640 6.56 490 548 600 4 1.260 0.039 252.60 1.72 2.25
FLEXSM2MRC6X24 566590 6.56 506 566 620 6 0.945 0.039 284.19 1.72 2.25
FLEXSM2MRC5X32 566650 6.56 573 640 702 5 1.260 0.039 315.70 1.72 2.25
FLEXSM2MRC6X32 566660 6.56 640 715 783 6 1.260 0.039 378.90 1.72 2.25
FLEXSM2MRC5X40 566720 6.56 680 760 832 5 1.575 0.039 394.70 1.72 2.25
FLEXSM2MRC6X40 566730 6.56 770 860 943 6 1.575 0.039 473.65 1.72 2.25
FLEXSM2MRC8X32 566670 6.56 770 860 943 8 1.260 0.039 505.22 1.72 2.25
FLEXSM2MRC5X50 566780 6.56 830 930 1,016 5 1.969 0.039 493.38 1.72 2.25
FLEXSM2MRC8X50 566800 6.56 1,050 1,175 1,290 8 1.969 0.039 789.41 1.72 2.25
FLEXSM2MRC10X40 566750 6.56 1,055 1,181 1,295 10 1.575 0.039 789.41 1.72 2.25
FLEXSM2MRC10X50 566810 6.56 1,245 1,395 1,525 10 1.969 0.039 986.76 1.72 2.25
ADMISSIBLE CURRENTS: This table indicates the temperature rise produced by chosen current in the given section. This calculation does not take into account the heat dissipation from the switch gear.
∆T = Temperature of conductors – Internal temperature of panel.
Refer to technical documentation for additional ampacity ratings.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.

ABS is a registered certification mark of American Bureau of Shipping.
IEC is a registered trademark of the International Electrotechnical Commission.
UL, UR, cUL, cUR, cULus and cURus are registered certification marks of UL LLC.

Applications

Video