United StatesChange
CADDY

320W Welded Beam Attachment

Features

  • Hanger rod attachment to be welded to the bottom of a beam where large rod sizes and substantial loads exist
  • Based on the allowable stresses shown in ANSIĀ® Code for Pressure Piping
  • Conforms with Federal Specification WW-H-171 (Type 22), Manufacturers Standardization Society ANSIĀ®/MSS-SP-58 (Type 22)

Specifications

Material: Steel
Finish: Plain
Part Number Rod SizeRS A C Screw DiameterSc Screw LengthL Static LoadF
320W0037PL 3/8" 2" 1 9/16" 1/2" 2 1/2" 600 lb
320W0050PL 1/2" 2" 1 5/8" 5/8" 2 1/2" 1,130 lb
320W0062PL 5/8" 2" 1 5/8" 5/8" 2 3/4" 1,810 lb
320W0075PL 3/4" 2" 1 7/8" 7/8" 4" 2,710 lb
320W0087PL 7/8" 3" 2" 1" 4" 3,770 lb
320W0100PL 1" 3" 2" 1 1/8" 5" 4,960 lb
Install when a rod attachment is desired, such as Model #40 Eye Rod or #35 Welded Eye Nut.
Install in accordance with applicable code.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.

ANSI is a registered trademark of American National Standards Institute.