United StatesChange

T-Series Horizontal Splice Kit, Side Fill

T-Series splice kits contain the following: Sleeve, filler material kit (filler material, packing, pouring basin ceramic insert and disk, pouring basin ceramic guide tube), pouring basin and pouring basin crucible. Splice kits are ordered based on the quantity of splices needed. Sleeves and filler material kits are one-time use parts. Pouring basins and crucibles are prorated based on their anticipated life. Ordering splice kits simplifies ordering, reduces order errors and helps ensure proper sizing of components. Kits can be ordered with longer (extended) sleeves for use when the reinforcing steel deformation pattern or spacing does not meet the minimum product specifications.


  • Simplifies ordering
  • Used to splice the same diameter bars


Sleeve: Standard Length
Part Number Rebar Size, Metric Rebar Size, US Rebar Size, Canada Length 1L1 Length 2L2 Height 1H1 Height 2H2 DiameterØ
RBT6101HS 20 mm #6 20M 3.32" 15.62" 18.25" 2.97" 4"
RBT8101HS 25 mm #8 25M 3.32" 15.87" 18.25" 2.97" 4"
RBT9101HS 28 mm #9 30M 3.45" 16.01" 18.25" 2.97" 4"
RBT1091HS 32 mm #10 3.45" 16.03" 19.75" 2.97" 5"
RBT11101HS 36 mm #11 35M 3.70" 16.25" 19.75" 2.97" 5"
RBT1891HS 57 mm #18 55M 4.01" 16.67" 21.00" 2.97" 7"
Splice Kit Components
Splice Kit Filler 
(2 Required)
Pouring Basin 
Ceramic Insert 
and Disk
Pouring Basin 
Guide Tube
Sleeve Pouring
RBT6101HS RBF50 RBS35477 RBS5037 RBS5038 RBT6101HSA RBWS1547X RBWS22774
RBT8101HS RBF55 RBS354710 RBS5037 RBS5038 RBT8101HSA RBWS1547C RBWS22774
RBT9101HS RBF80 RBS354711 RBS5037 RBS5038 RBT9101HSA RBWS1547D RBWS22774
RBT1091HS RBF90 RBS354712 RBS5037 RBS5038 RBT1091HSA RBWS1547E RBWS22775
RBT11101HS RBF105 RBS354712 RBS5037 RBS5038 RBT11101HSA RBWS1547F RBWS22775
RBT1891HS RBF270 RBS354720 RBS5037 RBS5039 RBT1891HSA RBWS1547M RBWS22777
Prior to installation, please read and understand all of the detailed instructions and safety notices provided in the nVent LENTON Cadweld Rebar Splicing System instruction manual.
All dimensions are for reference only.
Components can also be purchased separately: (1) Sleeve, (2) Filler Material Kit (filler material, packing, pouring basin ceramic insert and disk, pouring basin ceramic guide tube), (3) Pouring Basin, and (4) Pouring Basin Crucible.

nVent, nVent CADDY, nVent ERICO, nVent ERIFLEX, and nVent LENTON are owned by nVent or its global affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without prior notice.