United StatesChange
ERICO

Cable to Cable, Cathodic

ERICO CADWELD Cathodic Connections are the preferred method of exothermically welding cathodic protection anode leads to pipes (steel or cast iron), tanks, and other structures. Cathodic protection systems are designed to prevent galvanic corrosion along a pipeline or in various structures. ERICO CADWELD Cathodic Connections use a special welding material alloy to minimize heat effect on the steel, which is especially important on thin wall and high stress pipes.

Features

  • Forms a permanent, low resistance connection
  • Provides a molecular bond
  • ERICO CADWELD Exothermic Connections are rated with the same current capacity as the conductor
  • Portable installation equipment with no external source of power required
  • Installers can be easily trained to make ERICO CADWELD Exothermic Connections
  • Connections can be visually inspected

Specifications

CA-XX-X-XX-XX-L-M-W
CA Cathodic Designation
XX Mold Family
X Price Key
XX Conductor Code 1
XX Conductor Code 2
L* Split Crucible Crucible section is split on molds designed with horizontal opening for easier cleaning
M* Mold Only
W* Wear Plates Reduce mechanical abrasion of molds at cable entry points
* Empty if none

Search

The search below may not contain all product options. For made-to-order configurations, consult the chart above.

Mold Family
Conductor 1
Conductor 1 Outer Diameter, Nominal
Conductor 2
Conductor 2 Outer Diameter, Nominal

Mold Family

Part Number Mold Family Conductor 1 Conductor 1 Outer Diameter, Nominal Conductor 2 Conductor 2 Outer Diameter, Nominal
CAPCP1V1V PC #2 Concentric 0.292" #2 Concentric 0.292"
CAPCT1V1H PC #2 Concentric 0.292" #6 Concentric 0.184"
CAPCT1V1G PC #2 Concentric 0.292" #6 Solid 0.162"
CAPCT1V1E PC #2 Concentric 0.292" #8 Concentric 0.146"
CAPCT1L1L PC #4 Concentric 0.232" #4 Concentric 0.232"
CAPCT1L1LM PC #4 Concentric 0.232" #4 Concentric 0.232"
CAPCT1L1H PC #4 Concentric 0.232" #6 Concentric 0.184"
CAPCT1L1E PC #4 Concentric 0.232" #8 Concentric 0.146"
CAPCT1H1H PC #6 Concentric 0.184" #6 Concentric 0.184"
CAPCT1H1E PC #6 Concentric 0.184" #8 Concentric 0.146"
CAPCT1H1D PC #6 Concentric 0.184" #8 Solid 0.128"
CAPCT1G1G PC #6 Solid 0.162" #6 Solid 0.162"
CAPCP2C1V PC 1/0 Concentric 0.373" #2 Concentric 0.292"
CAPCP2C1L PC 1/0 Concentric 0.373" #4 Concentric 0.232"
CAPCP2C1H PC 1/0 Concentric 0.373" #6 Concentric 0.184"
CAPCN2G1V PC 2/0 Concentric 0.418" #2 Concentric 0.292"
CAPCP2G1G PC 2/0 Concentric 0.418" #6 Solid 0.162"
CASST1Y SS #1 Concentric 0.332" #1 Concentric 0.332"
CASST1A SS #10 Solid 0.102" #10 Solid 0.102"
CASST1V SS #2 Concentric 0.292" #2 Concentric 0.292"
CASST1L SS #4 Concentric 0.232" #4 Concentric 0.232"
CASST1K SS #4 Solid 0.204" #4 Solid 0.204"
CASST1H SS #6 Concentric 0.184" #6 Concentric 0.184"
CASST1G SS #6 Solid 0.162" #6 Solid 0.162"
CASST1E SS #8 Concentric 0.146" #8 Concentric 0.146"
CASST1D SS #8 Solid 0.128" #8 Solid 0.128"
CASSP2C SS 1/0 Concentric 0.373" 1/0 Concentric 0.373"
CASSP2G SS 2/0 Concentric 0.418" 2/0 Concentric 0.418"
CATAN1Y1V TA #1 Concentric 0.332" #2 Concentric 0.292"
CATAN1V1V TA #2 Concentric 0.292" #2 Concentric 0.292"
CATAN1V1L TA #2 Concentric 0.292" #4 Concentric 0.232"
CATAN2C1Y TA 1/0 Concentric 0.373" #1 Concentric 0.332"
CATAN2C1YM TA 1/0 Concentric 0.373" #1 Concentric 0.332"
CATAN2C1V TA 1/0 Concentric 0.373" #2 Concentric 0.292"
CATAN2C1L TA 1/0 Concentric 0.373" #4 Concentric 0.232"
CATAN2C2C TA 1/0 Concentric 0.373" 1/0 Concentric 0.373"
CATAN2G1V TA 2/0 Concentric 0.418" #2 Concentric 0.292"
CATAN2G1L TA 2/0 Concentric 0.418" #4 Concentric 0.232"
CATAN2G2G TA 2/0 Concentric 0.418" 2/0 Concentric 0.418"
For applications such as computer room, tunnel or other low-ventilation areas, specify a smokeless ERICO CADWELD EXOLON mold. Add an XL prefix to the standard mold part number when ordering (for example, a TAC2Q2Q becomes XLTAC2Q2Q). Similarly, ERICO CADWELD EXOLON welding material is also designated by the XL prefix (for example, 150 becomes XL150).
A gap between conductors may be required. See mold tag for more information.
Use XF19 or PLUSXF19 welding material on connections to ductile iron.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.