United StatesChange
nVent ERICO

Copper-Bonded Ground Rod, Pointed

Features

  • 99.9% pure electrolytic copper coating
  • Molecular bond to nickel-sealed high strength steel core
  • Rods have a high carbon steel core and tip that provide superior strength when driving
  • Copper coating will not crack when bent or tear when driven
  • Minimum copper coating of 10 mils on rods listed to UL® 467
  • nVent ERICO name, length, diameter and part number is roll-stamped within 12" (304,8 mm) of chamfered end
  • UL logo and control number where applicable stamped on each rod for easy inspection after installation

Specifications

Material: Copper-Bonded Steel
Tensile Strength: 80,000 psi Min
Part Number Ground Rod Diameter, Nominal Ground Rod Diameter, ActualØ LengthL Plating Thickness Unit Weight UPC Label Complies With Certifications
613840 3/8" 0.358" 4.0' 10 mil 1.300 lb No
613840UPC 3/8" 0.358" 4.0' 10 mil 1.300 lb Yes
613850 3/8" 0.358" 5.0' 10 mil 1.600 lb No
613860 3/8" 0.358" 6.0' 10 mil 2.000 lb No
613880 3/8" 0.358" 8.0' 10 mil 2.700 lb No
611330 1/2" 0.504" 3.0' 10 mil 2.200 lb No
611340 1/2" 0.504" 4.0' 10 mil 2.800 lb No
611350 1/2" 0.504" 5.0' 10 mil 3.500 lb No
611360 1/2" 0.504" 6.0' 10 mil 4.400 lb No
611360UPC 1/2" 0.504" 6.0' 10 mil 4.400 lb Yes
611380 1/2" 0.504" 8.0' 10 mil 5.500 lb No ANSI®/NEMA® GR1 UL
611380UPC 1/2" 0.504" 8.0' 10 mil 5.500 lb Yes ANSI®/NEMA® GR1 UL
611300 1/2" 0.504" 10.0' 10 mil 6.900 lb No ANSI®/NEMA® GR1 CSA, cULus
611300UPC 1/2" 0.504" 10.0' 10 mil 6.900 lb Yes ANSI®/NEMA® GR1 cULus
6113330 1/2" 0.505" 3.3' 10 mil 2.212 lb No IEC® EN 62561-2
611353 1/2" 0.505" 5.0' 13 mil 3.700 lb No
611370 1/2" 0.505" 6.9' 10 mil 4.647 lb No IEC® EN 62561-2
611303 1/2" 0.505" 10.0' 13 mil 7.400 lb No ANSI®/NEMA® GR1 cULus
615830 5/8" 0.560" 3.0' 10 mil 2.500 lb No IEC® EN 62561-2
6158330 5/8" 0.560" 3.3' 10 mil 2.728 lb No IEC® EN 62561-2
615840 5/8" 0.560" 4.0' 10 mil 3.400 lb No IEC® EN 62561-2
615840UPC 5/8" 0.560" 4.0' 10 mil 3.400 lb Yes IEC® EN 62561-2
615850 5/8" 0.560" 5.0' 10 mil 4.200 lb No IEC® EN 62561-2
615860 5/8" 0.560" 6.0' 10 mil 5.100 lb No IEC® EN 62561-2
615860UPC 5/8" 0.560" 6.0' 10 mil 5.100 lb Yes IEC® EN 62561-2
6158660 5/8" 0.560" 6.6' 10 mil 5.460 lb No IEC® EN 62561-2
615880 5/8" 0.560" 8.0' 10 mil 6.800 lb No IEC® EN 62561-2, ANSI®/NEMA® GR1 UL
615880UPC 5/8" 0.560" 8.0' 10 mil 6.800 lb Yes IEC® EN 62561-2, ANSI®/NEMA® GR1 UL
615800UPC 5/8" 0.560" 10.0' 10 mil 8.400 lb Yes IEC® EN 62561-2, ANSI®/NEMA® GR1 cULus
615800 5/8" 0.560" 10.0' 10 mil 8.500 lb No IEC® EN 62561-2, ANSI®/NEMA® GR1 CSA, cULus
615812 5/8" 0.560" 12.0' 10 mil 10.000 lb No IEC® EN 62561-2, ANSI®/NEMA® GR1 cULus
615815 5/8" 0.560" 15.0' 10 mil 12.800 lb No IEC® EN 62561-2, ANSI®/NEMA® GR1 cULus
615843 5/8" 0.561" 4.0' 13 mil 3.400 lb No IEC® EN 62561-2
615853 5/8" 0.561" 5.0' 13 mil 4.500 lb No IEC® EN 62561-2
615863 5/8" 0.561" 6.0' 13 mil 5.400 lb No IEC® EN 62561-2
615883 5/8" 0.561" 8.0' 13 mil 6.800 lb No IEC® EN 62561-2, ANSI®/NEMA® GR1 UL
615883UPC 5/8" 0.561" 8.0' 13 mil 6.800 lb Yes IEC® EN 62561-2, ANSI®/NEMA® GR1 UL
615803 5/8" 0.561" 10.0' 13 mil 8.400 lb No IEC® EN 62561-2, ANSI®/NEMA® GR1 cULus
615950 5/8" 0.625" 4.9' 10 mil 5.180 lb No
615980 5/8" 0.630" 8.0' 10 mil 8.500 lb No IEC® EN 62561-2, ANSI®/NEMA® GR1 UL
615900 5/8" 0.630" 10.0' 10 mil 10.500 lb No IEC® EN 62561-2, ANSI®/NEMA® GR1 cULus
613440 3/4" 0.681" 4.0' 10 mil 5.600 lb No IEC® EN 62561-2
613450 3/4" 0.681" 5.0' 10 mil 6.200 lb No IEC® EN 62561-2
613460 3/4" 0.681" 6.0' 10 mil 7.500 lb No IEC® EN 62561-2
613470 3/4" 0.681" 6.9' 10 mil 8.454 lb No IEC® EN 62561-2
613480 3/4" 0.681" 8.0' 10 mil 10.100 lb No IEC® EN 62561-2, ANSI®/NEMA® GR1 UL
613483 3/4" 0.681" 8.0' 13 mil 10.000 lb No IEC® EN 62561-2, ANSI®/NEMA® GR1 UL
613400 3/4" 0.681" 10.0' 10 mil 12.600 lb No IEC® EN 62561-2, ANSI®/NEMA® GR1 CSA, cULus
613400UPC 3/4" 0.681" 10.0' 10 mil 12.600 lb Yes IEC® EN 62561-2, ANSI®/NEMA® GR1 cULus
613403 3/4" 0.681" 10.0' 13 mil 12.400 lb No IEC® EN 62561-2, ANSI®/NEMA® GR1 cULus
613412 3/4" 0.681" 12.0' 10 mil 14.900 lb No IEC® EN 62561-2, ANSI®/NEMA® GR1 cULus
613415 3/4" 0.681" 15.0' 10 mil 18.500 lb No IEC® EN 62561-2, ANSI®/NEMA® GR1 cULus
693450 3/4" 0.750" 5.0' 10 mil 6.170 lb No
693480 3/4" 0.750" 8.0' 10 mil 10.060 lb No IEC® EN 62561-2, ANSI®/NEMA® GR1 UL
693400 3/4" 0.750" 10.0' 10 mil 12.300 lb No IEC® EN 62561-2, ANSI®/NEMA® GR1 cULus
614400 1" 0.911" 10.0' 10 mil 22.000 lb No ANSI®/NEMA® GR1 CSA, cULus
For rods to be listed to UL® 467, they must be at least 8' (2.43 m) in length.
IEC® EN 62561-2 supercedes EN 50164-2.
Additional lengths available.

nVent, nVent CADDY, nVent ERICO, nVent ERIFLEX, and nVent LENTON are owned by nVent or its global affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without prior notice.

ANSI is a registered trademark of American National Standards Institute.
CSA, CSA-US and C-CSA-US are registered trademarks of Canadian Standards Association.
IEC is a registered trademark of the International Electrotechnical Commission.
NEMA is a registered service mark of National Electrical Manufacturers Association.
UL, UR, cUL, cUR, cULus and cURus are registered certification marks of UL LLC.

Applications