United StatesChange
ERICO

Copper-Bonded Ground Rod, Sectional

Features

  • Cold-rolled threads with continuous, unbroken grain flows preserve copper coating and are stronger than cut threads
  • 99.9% pure electrolytic copper coating
  • Molecular bond to nickel-sealed high strength steel core
  • Rods have a high carbon steel core and tip that provide superior strength when driving
  • Copper coating will not crack when bent or tear when driven
  • Minimum copper coating of 10 mils on rods listed to UL® 467
  • ERICO name, length, diameter and part number is roll-stamped within 12" (304,8 mm) of chamfered end
  • UL logo and control number where applicable stamped on each rod for easy inspection after installation

Specifications

Material: Copper-Bonded Steel
Tensile Strength: 80,000 psi Min
Thread Location: Pointed and Chamfered Ends
Part Number Ground Rod Diameter, Nominal Ground Rod Diameter, ActualØ Thread SizeTS LengthL Plating Thickness Unit Weight Complies With Certifications
631340 1/2" 0.504" 9/16 UNC 4' 10 mil 2.7 lb
631350 1/2" 0.504" 9/16 UNC 5' 10 mil 3.5 lb
631360 1/2" 0.504" 9/16 UNC 6' 10 mil 4.2 lb
631380 1/2" 0.504" 9/16 UNC 8' 10 mil 5.4 lb ANSI®/NEMA® GR1 UL
631300 1/2" 0.504" 9/16 UNC 10' 10 mil 6.9 lb ANSI®/NEMA® GR1 CSA, cULus
631303 1/2" 0.505" 9/16 UNC 10' 13 mil 7.0 lb ANSI®/NEMA® GR1 cULus
635830 5/8" 0.560" 5/8 UNC 3' 10 mil 2.6 lb IEC® EN 62561-2
635840 5/8" 0.560" 5/8 UNC 4' 10 mil 3.4 lb IEC® EN 62561-2
635850 5/8" 0.560" 5/8 UNC 5' 10 mil 4.2 lb IEC® EN 62561-2
635860 5/8" 0.560" 5/8 UNC 6' 10 mil 5.0 lb IEC® EN 62561-2
635870 5/8" 0.560" 5/8 UNC 7' 10 mil 6.4 lb IEC® EN 62561-2
635880 5/8" 0.560" 5/8 UNC 8' 10 mil 6.7 lb ANSI®/NEMA® GR1, IEC® EN 62561-2 UL
635800 5/8" 0.560" 5/8 UNC 10' 10 mil 8.4 lb ANSI®/NEMA® GR1, IEC® EN 62561-2 CSA, cULus
635843 5/8" 0.561" 5/8 UNC 4' 13 mil 3.4 lb IEC® EN 62561-2
635883 5/8" 0.561" 5/8 UNC 8' 13 mil 6.7 lb ANSI®/NEMA® GR1, IEC® EN 62561-2 UL
635803 5/8" 0.561" 5/8 UNC 10' 13 mil 8.5 lb ANSI®/NEMA® GR1, IEC® EN 62561-2 cULus
633430 3/4" 0.680" 3/4 UNC 3' 10 mil 3.8 lb IEC® EN 62561-2
633440 3/4" 0.680" 3/4 UNC 4' 10 mil 4.9 lb IEC® EN 62561-2
633450 3/4" 0.680" 3/4 UNC 5' 10 mil 6.2 lb IEC® EN 62561-2
633460 3/4" 0.680" 3/4 UNC 6' 10 mil 7.1 lb IEC® EN 62561-2
633470 3/4" 0.680" 3/4 UNC 7' 10 mil 8.5 lb IEC® EN 62561-2
633480 3/4" 0.680" 3/4 UNC 8' 10 mil 9.6 lb ANSI®/NEMA® GR1, IEC® EN 62561-2 UL
633400 3/4" 0.680" 3/4 UNC 10' 10 mil 12.5 lb ANSI®/NEMA® GR1, IEC® EN 62561-2 CSA, cULus
633415 3/4" 0.680" 3/4 UNC 15' 10 mil 18.8 lb ANSI®/NEMA® GR1, IEC® EN 62561-2 cULus
633463 3/4" 0.681" 3/4 UNC 6' 13 mil 7.1 lb IEC® EN 62561-2
633403 3/4" 0.681" 3/4 UNC 10' 13 mil 12.5 lb ANSI®/NEMA® GR1, IEC® EN 62561-2 cULus
634400 1" 0.912" 1 UNC 10' 10 mil 22.1 lb ANSI®/NEMA® GR1 CSA, cULus
Thread Location: Chamfered (Non-Pointed) End Only
Part Number Ground Rod Diameter, Nominal Ground Rod Diameter, ActualØ Thread SizeTS LengthL Plating Thickness Unit Weight Complies With Certifications
625850 5/8" 0.560" 5/8 UNC 5' 10 mil 4.2 lb IEC® EN 62561-2
For rods to be listed to UL® 467, they must be at least 8' (2.43 m) in length.
IEC® EN 62561-2 supercedes EN 50164-2.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.

ANSI is a registered trademark of American National Standards Institute.
CSA, CSA-US and C-CSA-US are registered trademarks of Canadian Standards Association.
IEC is a registered trademark of the International Electrotechnical Commission.
NEMA is a registered service mark of National Electrical Manufacturers Association.
UL, UR, cUL, cUR, cULus and cURus are registered certification marks of UL LLC.

Applications

Brochures

Wind Power Solutions
1.95 MB English

Catalogs

Certifications

BBJ Z/12/045/16 (Poland)
EN 50164-2, 615 KB Polski, English
BBJ Z/12/046/16 (Poland)
EN 62561-2, 608 KB Polski, English
CSA 46866
CSA C22.2 No. 0, CSA C22.2 No. 41
cUL KDER7.E220029
CSA C22.2 No. 41
UL KDER.E220029
ANSI/UL 467

Technical