United StatesChange
ERICO

Lug or Busbar to Steel

ERICO CADWELD graphite molds are designed and engineered for thousands of connection styles and conductor combinations.

Features

  • Forms a permanent, low resistance connection
  • Provides a molecular bond
  • ERICO CADWELD Exothermic Connections are rated with the same current capacity as the conductor
  • Portable installation equipment with no external source of power required
  • Installers can be easily trained to make ERICO CADWELD Exothermic Connections
  • Connections can be visually inspected

Specifications

XX-X-XX-L-M-W
XX Mold Family
X Price Key
XX Lug/Busbar Size
L* Split Crucible Crucible section is split on molds designed with horizontal opening for easier cleaning
M* Mold Only
W* Wear Plates Reduce mechanical abrasion of molds at cable entry points
* Empty if none

Search

The search below may not contain all product options. For made-to-order configurations, consult the chart above.

Mold Family
Lug/Busbar Size

Mold Family

Part Number Mold Family Lug/Busbar Size Connects To
BWDJH BW 1/2" x 2" Steel Surface
BWCEF BW 1/4" x 1 1/4" Steel Surface
BWCCG BW 1/8" x 1 1/2" Steel Surface
BWCBAK BW 2 mm x 30 mm Steel Surface
BWCCAJ BW 3 mm x 25 mm Steel Surface
BWCCAM BW 3 mm x 50 mm Steel Surface
BWCDE BW 3/16" x 1" Steel Surface
BWCEAL BW 4 mm x 40 mm Steel Surface
BWCFAL BW 5 mm x 40 mm Steel Surface
BWDPAM BW 6 mm x 50 mm Steel Surface
BWCAF BW 1/16" x 1 1/4" Steel Surface
BWCDG BW 3/16" x 1/2" Steel Surface
CCCEH CC 1/4" x 2" and wider Steel Surface
CCCBAK CC 2 mm x 30 mm Steel Surface
CFDEHRH CF 1/4" x 2" and wider Steel Surface
CFCDELH CF 3/16" x 1" Steel Surface
CGCEF CG 1/4" x 1 1/4" Steel Surface
CGDEH CG 1/4" x 2" Steel Surface
CGKEM CG 1/4" x 4" Steel Surface
CGCBAK CG 2 mm x 30 mm Steel Surface
CGCDE CG 3/16" x 1" Steel Surface
CGCEAL CG 4 mm x 40 mm Steel Surface
CGCFAK CG 5 mm x 30 mm Steel Surface
CHCBAK CH 2 mm x 30 mm Steel Surface
CHCDG CH 3/16" x 1 1/2" and wider Steel Surface
CHCPAL CH 6 mm x 40 mm and wider Steel Surface
CHCPAJ CH 6 mm x 25 mm and wider Steel Surface
DFFEHLH DF 1/4" x 2" Steel Surface
HLCEG HL 1/4" x 1 1/2" Steel Surface
For applications such as computer room, tunnel or other low-ventilation areas, specify a smokeless ERICO CADWELD EXOLON mold. Add an XL prefix to the standard mold part number when ordering (for example, a TAC2Q2Q becomes XLTAC2Q2Q). Similarly, ERICO CADWELD EXOLON welding material is also designated by the XL prefix (for example, 150 becomes XL150).
A test weld should be made to check for the possibility of burn through on thin sections and to determine detrimental metallurgical effects.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.