United StatesChange
CADDY

Push In Conduit Clamp with Shot-Fire Bracket

Features

  • Push-in installation of conduit
  • Eliminates need for offset bending conduit
  • Complete with shot-fire bracket and pre-assembled drive pin from Powers Fasteners, Inc.
  • Quickly and easily attaches to concrete, steel or composite metal decking
  • Integrated pin installs easily using powder-actuated or single-shot gas-actuated tools
  • ICC-ES ESR-2024 evaluation report available for drive pin from Powers Fasteners, Inc

Specifications

Material: Steel; Spring Steel
Finish: Electrogalvanized; CADDY ARMOUR
Part Number EMT Conduit Size Outer DiameterOD HeightH WidthW A Ultimate Static LoadF
8PSF 1/2" 0.709" – 0.866" 1 11/16" 2 15/16" 7/8" 15 lb
12PSF 3/4" 0.866" – 1.181" 1 11/16" 3 1/16" 7/8" 15 lb
16PSF 1" 1.181" – 1.378" 1 7/8" 3 3/8" 7/8" 15 lb
Uses Powers Fasteners, Inc. part number 50032.
Static load was established based on a 1” (25.4 mm) embedment depth and 3,000 psi (20.68 Mpa) lightweight concrete. For variations in embedment and material please consult www.powers.com. ​
Pre-assembled drive pin from Powers Fasteners, Inc. works with Powers® C4CZ, Simpson® GCN-MEPKT, SPIT® P1000, P200, P2201, P3500 / PA3500, P35s, P45, P60, P7201, Sniper; Ramset® 721, Cobra, D45 / D60 / D60L, M70, SA270, T3SS, TS750P, TS60P, Viper; Hilti® DX35, DX350 / DX351 / DX36M, DX100 / DX200, DX460, DXA40, DXA41,​ DXE72 / DX400; Würth Diva-1, BST-1, BST-2 or equivalent nailers.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.

HILTI is a registered trademark of Hilti Aktiengesellschaft.
Ramset is a registered trademark of Illinois Tool Works, Inc.
Simpson is a registered trademark of Simpson Strong-Tie Company Inc.
SPIT is a registered trademark of Societe De Prospection & D’Inventions Techniques Spit.

Applications