United StatesChange

nVent CADDY Speed Link SLS with Decking Hook


  • Complete system includes wire, locking device and pre-assembled decking hook end fitting
  • Quickly and easily attaches to hollow metal decking
  • Spring-loaded ends snap into decking hole and lock into place
  • Innovative design helps protect the wire from sharp edges of decking hole, minimizing risk of damage to wire
  • Finger tightening of nut secures the locking device into position without tools
  • Installs in strut profiles without the need to insert fingers or too​ls into the strut


Material: Steel; Zinc Alloy; Polypropylene
Finish: Electrogalvanized
Static Load Safety Factor: 5:1
Complies With: SMACNA HVAC-DCS
Wire Rope Diameter: 2 mm
Part Number Wire Rope Length Roof Decking Sheet Thickness A Hole Size 1HS1 Static LoadF
SLS2L3DH 9.9' 16 GA Max 0.36" 0.315" 60 lb
SLS2L5DH 16.4' 16 GA Max 0.36" 0.315" 60 lb
SLS2L7DH 22.9' 16 GA Max 0.36" 0.315" 60 lb
Thread SizeTS Height 1H1 Height 2H2 WidthW ThicknessT Hole Size 2HS2 Slot SizeSS
M8 2.1" 1.8" 0.6" 0.15" Max 0.31" – 0.38" 0.31" x 0.25" - 0.31" x 0.38"
The 2 mm locking device is compatible with C-Channel Types E0 and E0L.
Total load per wire on a multi-tier trapeze must not exceed static load.
Load rating is only applicable if the load-bearing capacity of the supporting element (steel decking) is adequate.
Check with deck manufacturer for recommended load capacity.

nVent, nVent CADDY, nVent ERICO, nVent ERIFLEX, and nVent LENTON are owned by nVent or its global affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without prior notice.

UL, UR, cUL, cUR, cULus and cURus are registered certification marks of UL LLC.


3D Models