United StatesChange
LENTON

S13 Metric Parallel Bolt Coupler, Coated

Coated reinforcing bar is used in place of plain reinforcing bars to protect against corrosion. Typical applications include bridges, parking structures, pavement, marine structures and repair work. LENTON couplers and mechanical anchors are available in multiple coatings to meet specific job requirements.

Features

  • Provides continuity between reinforcing bar and ISO® 965 metric all-thread rod or bolts
  • May be used to anchor load-bearing equipment to foundations, columns or walls

Specifications

Material: Steel
Finish: Mechanical Galvanized
Finish Standard: ASTM® B695 Class 50 with Clear Trivalent Chromate Seal
100% U.S. Domestic Content: Yes
Part Number Rebar Size, Metric Rebar Size, US Rebar Size, Canada Hex WidthW DiameterØ LengthL A Bar DepthBD Thread SizeTS Thread DepthTD Unit Weight
EL20S13MG 20 mm #6 20M 1.38" 3.87" 2.15" 1.37" M24 1.07" 1.1 lb
Designed to Meet
AASHTO, ABNT NBR 8548:1984, ACI 318 Type 1 (125% Specified Yield), ACI 318 Type 2 (Specified Ultimate), ACI 349, ACI 359, AS3600, BS EN 1992-1-1, BS EN 1992-2, CAN/CSA - N287.2/.3/.4, DIN EN 1992-1-1, Eurocode 2, IBC Type 1 (125% Specified Yield), IBC Type 2 (Specified Ultimate), ISO 15835, NEN EN 1992-1-1, NF A 35-020-1, NF EN 1992-1-1, ÖNORM EN 1992-1-1, Sellafield Ltd. Std. ES_0_3110, US Army Corps of Engineers
System Capacity
Part Number Grade 4.8 Grade 5.8 Grade 8.8 Grade 10.9 Grade 12.9
EL20S13MG 31,698 lbs 39,634 lbs 63,396 lbs 74,704 lbs 74,704 lbs
Bar dimensions and weights listed may vary by region. Coupler sizes not shown may be available by special order. Contact your LENTON representative for more information.
Coupler supplied without bolt.
Bolt may be replaced by threaded rod of same class/grade.
All calculations based on a minimum bolt engagement equal to Thread Depth (TD).
System Capacity based on bolt to coupler connection. For rebar to coupler connection, refer to applicable building codes and approvals or contact your LENTON representative.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.

ASTM is a registered trademark of American Society for Testing and Materials.
ISO is a registered trademark of International Organization for Standardization.

Video