United StatesChange
nVent CADDY

nVent CADDY Rod Lock Strut

Features

  • Allows for the quick creation, installation, and adjustment of multi-level trapeze assemblies
  • Ready to use out of the box and eliminates the need for cutting and preparing sections of strut
  • Easy "push-to-install" design allows installers to simply push the threaded rod through the mounting hole, instantly holding it in position
  • Integrated adjustment nut enables fine tuning the system height up or down
  • Accommodates slight variances in rod-to-rod position of the trapeze
  • No loose parts or special tools needed for installation
  • Lock nut can be finger tightened, locking the rod in place
  • Works with all accessories that fit standard A or C type strut channels

Specifications

Material: Steel
Finish: Electrogalvanized; Pregalvanized
Strut Type: A (1 5/8" x 1 5/8")
Part Number Rod SizeRS LengthL ThicknessT A B X Ultimate Static LoadF
CRLP237L14 3/8" 16" 12 GA 14" 7/8" 9/16" x 1 1/8" 2,668 lb
CRLP237L18 3/8" 20" 12 GA 18" 7/8" 9/16" x 1 1/8" 2,075 lb
CRLP237L22 3/8" 24" 12 GA 22" 7/8" 9/16" x 1 1/8" 1,698 lb
CRLP237L26 3/8" 28" 12 GA 26" 7/8" 9/16" x 1 1/8" 1,437 lb
CRLP237L38 3/8" 40" 12 GA 38" 7/8" 9/16" x 1 1/8" 983 lb
CRLP237L50 3/8" 52" 12 GA 50" 7/8" 9/16" x 1 1/8" 642 lb
CRLP250L14 1/2" 16" 12 GA 14" 7/8" 9/16" x 1 1/8" 2,668 lb
CRLP250L18 1/2" 20" 12 GA 18" 7/8" 9/16" x 1 1/8" 2,075 lb
CRLP250L22 1/2" 24" 12 GA 22" 7/8" 9/16" x 1 1/8" 1,698 lb
CRLP250L26 1/2" 28" 12 GA 26" 7/8" 9/16" x 1 1/8" 1,437 lb
CRLP250L38 1/2" 40" 12 GA 38" 7/8" 9/16" x 1 1/8" 983 lb
CRLP250L50 1/2" 52" 12 GA 50" 7/8" 9/16" x 1 1/8" 642 lb
Strut Type: C (13/16" x 1 5/8")
Part Number Rod SizeRS LengthL ThicknessT A B X Ultimate Static LoadF
CRLP137L14 3/8" 16" 14 GA 14" 7/8" 9/16" x 1 1/8" 789 lb
CRLP137L18 3/8" 20" 14 GA 18" 7/8" 9/16" x 1 1/8" 613 lb
CRLP137L22 3/8" 24" 14 GA 22" 7/8" 9/16" x 1 1/8" 494 lb
CRLP137L26 3/8" 28" 14 GA 26" 7/8" 9/16" x 1 1/8" 354 lb
CRLP137L38 3/8" 40" 14 GA 38" 7/8" 9/16" x 1 1/8" 166 lb
CRLP150L14 1/2" 16" 14 GA 14" 7/8" 9/16" x 1 1/8" 789 lb
CRLP150L18 1/2" 20" 14 GA 18" 7/8" 9/16" x 1 1/8" 613 lb
CRLP150L22 1/2" 24" 14 GA 22" 7/8" 9/16" x 1 1/8" 494 lb
CRLP150L26 1/2" 28" 14 GA 26" 7/8" 9/16" x 1 1/8" 354 lb
CRLP150L38 1/2" 40" 14 GA 38" 7/8" 9/16" x 1 1/8" 166 lb
Ultimate load ratings for nVent CADDY Rod Lock Strut assumes a uniformly distributed load and includes a hole factor of 0.92. It is based on the material yield and maximum allowable deflection; an additional Safety Factor of 2 is recommended.‚Äč
nVent CADDY Rod Lock Strut must be installed with the open side of the channel facing up.
For indoor applications only.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.

Applications

Video

3D Models