United StatesChange
CADDY

C-Clamp

Features

  • Pressed steel beam clamp
  • Conforms with Federal Specification WW-H-171 (Type 23), Manufacturers Standardization Society ANSIĀ®/MSS-SP-58 (Type 23)

Specifications

Static Load Safety Factor: 3.5:1
Material: Steel
Finish: Plain
Part Number Rod SizeRS Flange ThicknessFT A Screw DiameterSc Screw LengthL Pipe Size TorqueTQ Static LoadF
2000037PL 3/8" 3/4" Max 1 1/8" 3/8" 1 1/4" 4" Max 5 ft lb 250 lb
Material: Steel
Finish: Electrogalvanized
Part Number Rod SizeRS Flange ThicknessFT A Screw DiameterSc Screw LengthL Pipe Size TorqueTQ Static LoadF
2000037EG 3/8" 3/4" Max 1 1/8" 3/8" 1 1/4" 4" Max 5 ft lb 250 lb
Material: Stainless Steel 304 (EN 1.4301)
Part Number Rod SizeRS Flange ThicknessFT A Screw DiameterSc Screw LengthL Pipe Size TorqueTQ Static LoadF
2000037S4 3/8" 3/4" Max 1 1/8" 3/8" 1 1/4" 4" Max 5 ft lb 250 lb
Setscrew must be tightened and torqued onto the sloped side of the I-beam.
Recognizing that torque wrenches are generally not used or available on many job sites, the setscrew should be tightened so it contacts the I-beam and then an additional 1/4 to 1/2 turn added.

Pentair, CADDY, CADWELD, CRITEC, ERICO, ERIFLEX, ERITECH and LENTON are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the right to change specifications without prior notice.

ANSI is a registered trademark of American National Standards Institute.

Applications